Question about Digital Audio 2000 WATTS HIGH CURRENT AMPLIFIER DHC2154 Car Audio Amplifier

1 Answer

Amp watts? canany body tell me how many watts the dhc2154 amp has? i found it at a yard sale. thanks in advance

Posted by on

  • shane Aug 30, 2008

    thank you! this is the first time i have used fixya, and im sure i will be back thanks again.


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

It puts out 250w per channel with a 4-ohm load. From the pricing I see online, if you got it at a garage sale, you probably didn't pay much for it, which means it was likely the steal of the year - pricing online for a new one ranged from $423-703 depending on the retailer. In all likelihood, nice find!

Posted on Aug 30, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

For a 12 inch 4 Ohm DVC with 1200 Watts Max/400 Watts Nominal what size amp should I be using?

The speaker info is telling you that a 400watt input is nominal or stable. and handle anything that can Peak up to 1200watt , the speaker can handle the 1200watt but not for long periods. Distortion will likely occur well before then anyway. On my home stereo, I have twin Marshalls which are 500 watt each going to JBL,s rated at 150 watt with 250 peak. The ratings are a bit different from manufacturer to manufacturer. Ive found the system is really powerful but there is very little to no distortion as the amp is not needed to be cranked up to get the volume I want. If you run an amp that is too big for the speakers, it will sound really loud for a while, then distortion happens then watch your speaker cones self destruct or the voice coils burn out. If you run an amp that is too small, you will need to turn it up more for the volume and then distortion sets in earlier, which is the biggest destroyer of any speaker.

May 26, 2015 | Car Audio & Video

2 Answers

I have a 2800 watt and it is not louder than my 600 watt. What's my problem and how can I fix it. Thank you.

What are the exact model numbers of those amps? More than likely your 2.8K Watt amp is a complete lie, very few amps can deliver that power, if you paid under $1000 for it it's probably not likely to ever do that output, also some amps are rated at higher input voltages like 19 volts or more to achieve there advertised output but even then most will only do a fraction of what they claim. At 12volts and making those claims you'll find that Boss is a prime example so is the low end Lanzar along with many others out for sale now a days. A 2800 watt MAX amp rating is really a 150 watt x 2 output and that will be at 2 ohms, I'm not sure how it all started but way back when (back in the late 80's early 90's) there were only amps that had real power ratings and they were 25watts x 2 up to 200 watts x2 and the 25 watt amps were louder than most of these 1000watt amps you see now. A true 200 watt x 2 amp bridged in mono back then would deliver 800Watts into 4 ohms 1600 watts into 2 ohms and cost about a dollar a watt. The 25 watt x 2 amps I had would put out 400 watts in mono at 1 ohm. So you see power ratings now are just not even anything you can use unless the amp is certified to be compliant with the new car stereo rating system. Even then I cannot guarantee which amp will be louder or sound better without actually connecting it up and hearing it myself. That's how car stereo shopping used to be, you listened to the amps all side by side and realized that size, cost and power ratings make no difference until you hear the amps, then size & cost are considered. Power ratings are then forgotten all together.

Aug 19, 2013 | Car Audio & Video

1 Answer

The ampe i got is the bp1200.1 is that 1200 watts in to one chanel can you tell me thanks

it is a mono (one channel) amp. it outputs 600 watts at 4 ohms (1x4 ohm speaker connected) and 1200 watts at 2 homs (2x4ohm speakers or dual 4 ohm voice coils in parallel).

Jan 31, 2011 | JBL BP1200.1 Car Audio Amplifier

1 Answer

What is current

Explains what electrical current is.

But as for your amp, it means that your amp can handle high power going through the amp without shutting down or being blown up. As your impedance(resistance) drops on the amp, more power the amp will put out....

Sep 19, 2010 | Digital Audio 2000 WATTS HIGH CURRENT...

1 Answer

The led on my lxa 600 watt amp in my dodge magnum

If the light is all that is on then it will be fine. It would take days to weeks for it to kill todays car batteries. If the amp is drawing more power than just that though, I would move the remote wire to the ignition or the headunit, because the fusebox is getting constant power to tell the amp to stay on.

Oct 10, 2009 | Car Audio & Video

1 Answer

Amp repair advice

check on the board to see if there is a resistor that looks similar, 90% of amps amps are matched in there design, meaning the left side is usally a carbon copy of the right, so if you look at one side and there is a resistor that looks like it's in the same spot on the other side, good chance thats the same one, read the colors off the one thats not burnt up. resistors come in different wattages,1/8,1/4 1/2 up to 10 watts, each wattage is a different size, most of the ones you see in the amp are 1/4 watt but some are 1/2 and 1/8. some on the output are 2 to 5 watt, but those are generally 10-18 mm in length, they are big ones you cant miss those. so once you get the color code, read the colors, ex red,gree,brown,last line is either silver or gold, that will tell you the resitor value. then google resistor color codes and then you can match the color sequence with the value codes, and that will tell you the value you need in ohms but then you have to get the size 1/4 watt resistors are generally about 6 mm in legnth, im measuring the actual part of the resistor not including the metal leads, just the body, so if its larger its probally a 1/2 watt if smaller its an 1/8 watt, 1/8 watt are about 4 mm. now go buy the resistor, but you might find it that tough, if its a common value radio shack might have it, but resistors are so cheap, pennies for a handful, good luck on your search.

Jun 30, 2009 | Sony Car Audio & Video

1 Answer

What are specs for dhc2154?

try a box with smaller prts or go with 1 vented box

Mar 31, 2009 | Digital Audio 2000 WATTS HIGH CURRENT...

1 Answer

I have t 1000amp what is the best speaker rms match

take the number of watts your amp puts out. divide it by 2.
thats how many watts rms you should get.

Jan 22, 2009 | Jensen A600HLX Car Audio Amplifier

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Digital Audio Car Audio & Video Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Digital Audio Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides