DESKTOP SOFT WARE

check soft ware at first , then hard ware solution by cleaning the board , be sure that keyboard is clean enough.....

my palm zire 31 is frozen...i can not turn it off...i can not navigate any where on it.....please help

If you are using a Vista 64 bit operating system then you cannot perform a Sync, I will give you a link which has the Palm desktop software to install onto the computer and make it work.
http://www.palm.com/us/support/downloads/win_desktop.html

Hi

Download ->THIS<- file and away you go.

Regards

Philip

P.S. if this don't work I've got a copy of the disk in my drawer (along with an M105, Treo 180g, Visor edge and Visor pro)

did u try a different battery?

Okay here it goes, your going to want to leave it on for however many hours it takes to completely drain the battery then you're going to want to recharge it back to normal charge, and try restarting it again. This will delete completely anything that is keeping it from restarting properly. If you did open up the machine without following "antistatic procedure" you may have fried a component on the board and then your in trouble
you'll need to salvage a board from another tungsten and put it back in your PDA and hope you put it back together right

Hello,

Soft Reset
A Soft Reset stops all active (or open) programs and "reboots" the handheld. When the Treo powers back up, you'll start with all programs closed and the unit will be ready to use. The soft reset is intended to reset the Treo if it is malfunctioning or has become bogged down.
The Palm Treo 750 can be soft reset by quickly pressing and releasing the tiny red button beneath the miniSD memory card door:
Hard Reset
A Hard Reset wipes the internal memory and returns the Treo to its factory specs, in effect returning the Treo 750 to the state it was in when you purchased it. All data entered, preferences set or software installed on the Treo after purchase will be lost after a hard reset and will have to transferred or reinstalled via ActiveSync / Windows Mobile Device Center.
The Palm Treo 750 can be hard reset by pressing and holding the power button (seen left) while at the same time pressing and holding reset button beneath the miniSD memory card door. Press and hold the two buttons until the screen completely fades. When the screen returns, you'll be given the option to "Erase all data." Select Yes to complete the hard reset. The Treo will now be as it was when it left the factory and you can start fresh. You may have to perform a soft reset after the hard reset to get the unit to power on.

Battery. You need a new battery. Also could be the hard drive in the device

After installing, reinstalling, deleting, hard resets, hitting head against wall... I tried installing the Pocket Mirror conduit as a last ditch effort. An error message popped up saying it could not find the mapi32.dll file. I looked at another PC, located that file in the windows32 directory, copied it to my PC, and I was able to hotsync with Outlook. To test this, I uninstalled the Pocket Mirror and Palm desktop SW, then deleted the mapi32.dll. Installed the Palm 4.1.4 sw, outlook 101 update, plus the conduit update, had same error messages. Added the mapi32.dll to the windows32 directory - was able to successfully sync with Outlook!

You supplied very little detail here on what you are starting with and what you hope to finish with. Are you synchronizing today and where does the data reside on your PC - in Palm Desktop? If you have all your data in the m105 and wish your Contacts, Calendar, Tasks and Memos to synchronize with your Outlook profile, then install the Desktop software that come with the m105. You will be given the option to synchronize with MS Outlook during the installation. Choose this. The data in your Outlook profile (root level folder only) will merge with the data inside the m105.