Question about Mitsubishi VS-5043 50" Rear Projection Television
Picture looks 3d and even the writing is blurred
Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.
This is a very common failure on these projection sets and a fairly simple DIY fix. All projection sets including Samsung, RCA, Sony, Philip Magnavox, Panasonic, Pioneer, Akai, GE, JVC, Toshiba, and others at some point will have the same problem.
Common Symptoms include....
•Screen looks 3D
•Colors don't line up
•One or more colors can't be adjusted when using the convergence menu.
•Screen is bowed or warped.
•TV shuts off after powering on. Power light will blink. TV may also make a chirping noise.
Here are some photos of convergence problems
mitsubishi 290p080020 big screen tv - fcabb43.png />CONVERGENCE SOLUTION
You can see some more examples and find a fix using this link on Fixya - CLICK HERE
Posted on Aug 28, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Feb 27, 2011 | Mitsubishi WD-62525 62" Rear Projection...
Jan 29, 2011 | Mitsubishi WS-65907 65" Rear Projection...
Dec 26, 2010 | Toshiba 53HX71 53" Rear Projection...
May 14, 2010 | Mitsubishi VS-5059 50" Rear Projection...
Dec 18, 2009 | Televison & Video
May 05, 2009 | RCA HD52W59 HDTV Projection Television
Jan 30, 2008 | Mitsubishi WT-46805 46" Rear Projection...
125 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: