Question about Lexmark Office Equipment & Supplies

1 Answer

Warranty Registration - Lexmark Office Equipment & Supplies

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 300 Answers

Hello,

You should be able to stat your registration here. Just follow the prompts

https://www.lexmarkregister.com/registration/ProductSelector.aspx

Please remember to rate this information.

Thanks

Posted on Aug 30, 2008

  • S C Sep 02, 2008

    I m not sure it that link worked fo you. When I clicked on it just now it added www.fixya.com to the address. If you had this issue, you can highlight the address by clicking to the left of the first letter of the address and holding the left mouse button down and drag the mouse to the end of the address. Then right click somewhere in the highlighted area and choose copy. This will copy the address to the clipboard. After that you can press Alt-D to highlight the address bar and right click and choose paste. This should copy the address into the address bar. Then you can press Enter to go to the page. Ill paste the link again case you need it again.



    https://www.lexmarkregister.com/registra...

    Once there just choose your printer model and click Next to start the registration.



    Thanks

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to clear E000051-0000 in IR3300 Photocopy Machine


E051-0000- At start-up, home position is not detected when the horizontal registration assembly is moved 100 mm in the direction of home position.
hoz.JPG
Main Cause- The horizontal home position sensor is faulty. The horizontal registration motor is faulty. The DC controller PCB is faulty.

1. Connector
Are the connectors of the horizontal registration home position sensor and the horizontal registration motor connected?
a. DC controller PCB (J304) <-> relay connector <-> horizontal registration home position sensor
b. DC controller PCB (J304) <-> relay connector <-> horizontal registration motor
NO:Connect the connectors.

2. Sensor lever (damage and interference),

Sensor
Is abnormal noise heard from the horizontal registration assembly in keeping with the motor rotation?
YES:
a. The horizontal registration assembly is out of place because of damage to the sensor lever. Replace the sensor lever.
b. The horizontal registration assembly malfunctions because of the presence of foreign matter. Remove the foreign matter.
c. The sensor is faulty and cannot detect home position. Replace the sensor.

3. Horizontal registration motor, DC controller PCB

Is the horizontal registration motor control signal generated by the DC controller PCB?
J304-1/2: 24 V, J304-3/4/5/6: motor excitation signal
YES: The horizontal registration motor is faulty.
Replace the motor.
NO: Replace the DC controller PCB.

Aug 17, 2016 | Canon IR 3300 Digital Copier

1 Answer

MFC-9840cdw with "print unable 36. Sometimes I can reboot and get it to print a few pages, but then the error comes back. I've cleaned and checked for ink, paper,etc. everywhere, but can't resolve th


Ok, here is what I found with a bit of internet research. Print Unable 36 error stems from an issue with the High Voltage Power Supply Printed Circuit Board (HVPS PCB).

Possible issues are:

1. The tech accidently didn't properly seat the connectors when re-hooking up the cables if indeed he or she removed any in dealing with your Error Code 32. "Check the two harness connections between the transfer HVPS PCB and Registration Relay PCB, and the two ones between the Registration Relay PCB and Engine PCB. Then reconnect them." If you try this yourself, make sure the machine is unplugged and cycle the power switch to discharge any power supply capacitors. You don't want to mess around with the high voltage. Best is to take the unit back into the tech for him or her to check it out.

2. The HVPS PCB has gone bad. If the machine is still under warranty (check for your receipt), don't go any further and just call Brother customer service at 1-877-436-2665. According another user, the part was shipped overnight and a tech came out the afternoon after he called and installed the part within 2 hours.

3. The Engine PCB failure. Replace the Engine PCB assembly. See warranty service recommendation above.

Start with #1 and if that doesn't resolve the issue, move to the next steps. If under warranty, have Brother do the service. If out of warranty, you'll have to examine the costs vs. buying a new machine.

We just bought another Brother printer (an MFC-9460CDN on closeout sale via Best Buy (~$329.99 and free shipping to the house)). Love Brother machines and service. Very robust in general and fairly easy to repair. I just replaced an MFC-8840DN that is more than 10 years old, and still working, though getting worn out.

Hope this helps.

Feb 16, 2015 | Brother MFC-9840CDW Laser Printer

1 Answer

My IR 3300 display E000051-0000 please help me...


Hello,
E051
0000 At start-up, home position is not detected when the horizontal registration
assembly is moved 100 mm in the direction of home position.
Main cause The horizontal home position sensor is faulty. The horizontal registration
motor is faulty. The DC controller PCB is faulty.
Action
1. Connector
Are the connectors of the horizontal registration home position sensor and
the horizontal registration motor connected?
a. DC controller PCB (J304) relay connector horizontal registration
home position sensor
b. DC controller PCB (J304) relay connector horizontal registration
motor
NO: Connect the connectors.
2. Sensor lever (damage and interference), Sensor
Is abnormal noise heard from the horizontal registration assembly in keeping
with the motor rotation?
YES: a. The horizontal registration assembly is out of place because of
damage to the sensor lever. Replace the sensor lever.
b. The horizontal registration assembly malfunctions because of the
presence of foreign matter. Remove the foreign matter.
c. The sensor is faulty and cannot detect home position. Replace the
sensor.
3. Horizontal registration motor, DC controller PCB
Is the horizontal registration motor control signal generated by the DC controller
PCB?
J304-1/2: 24 V, J304-3/4/5/6: motor excitation signal
YES: The horizontal registration motor is faulty. Replace the motor.
NO: Replace the DC controller PCB.


As You can see, is better to call service.

Hope that helps!

Aug 01, 2011 | Canon imageRUNNER 3300 All-In-One Laser...

1 Answer

CANNON IR2016R WHEN I START AFTER INITIALIZING IT


7.2 Detecting Jams 7.2.1 Delay Jams 7.2.1.1 Delay Jam in Pickup Assembly 0010-4883 iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i Delay Jam in Pickup Assembly The registration sensor cannot detect the leading edge of paper within the jam detection time interval after paper pickup started. T-7-2 7.2.1.2 Delay Jam in Delivery Assembly (Paper Leading Edge Jam at First Delivery Sensor/Wound Paper Jam at Fixing Assembly) 0011-0712 iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i Paper Leading Edge Jam at First Delivery Sensor The first delivery sensor cannot detect presence of paper within the prescribed time after the registration clutch has been turned on. T-7-3 Wound Paper Jam at Fuser The first delivery sensor has detected absence of paper within the prescribed time after it detected presence of paper (within the prescribed time after the registration clutch had been turned on). T-7-4 7.2.2 Stationary Jams 7.2.2.1 Stationary Jam in Pickup Assembly 0010-4884 iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i Stationary Jam in Pickup Assembly The registration sensor does not detect absence of paper within the prescribed time before the next leading edge of fed paper reaches the registration sensor. T-7-5 7.2.2.2 Stationary Jam in Delivery Assembly (Paper Trailing Edge Stationary Jam at First Delivery Sensor/Stationary Jam at First Delivery Sensor) 0011-0733 iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i Paper Trailing Edge Stationary Jam at First Delivery Sensor The first delivery sensor cannot detect absence of paper within the prescribed time after the registration sensor has been turned off. T-7-6 Stationary Jam at First Delivery Sensor The first delivery sensor cannot detect absence of paper within the prescribed time after it has detected the leading edge of paper. T-7-7 7.2.3 Other Jams 7.2.3.1 Door Open Jam 0010-4886 iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i Door Open Jam The door is opened when paper to be printed is in the paper feed path. 7.3 Cassette Pick-Up Unit 7.3.1 Overview 0010-4887 iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i The paper picked up from the cassette is fed to the registration roller using the vertical path roller driven by the main motor (M204). The registration roller is not rotating when paper reaches there, so an arch is formed at the leading of the paper to prevent skewing. The DC controller PCB turns on the registration clutch (CL203) at the prescribed timing to transfer the main motor rotation to the registration roller, thus feeding the paper to the delivery tray through the transfer, sepa- Sensor/Solenoid Registration sensor (SR209) Pickup solenoid (SL202) Sensor/Registration clutch First delivery sensor (SR203) Registration clutch (CL203) Sensor/Registration clutch First delivery sensor (SR203) Registration clutch (CL203

Jan 04, 2010 | Canon iR 2016i Black and White Copier

1 Answer

Error code 000051


From service manual E051-0000 At start-up, home position is not detected when the horizontal registration assembly is moved 100 mm in the direction of home position.
Main cause The horizontal home position sensor is faulty. The horizontal registration motor is faulty. The DC controller PCB is faulty.
Action
1. Connector
Are the connectors of the horizontal registration home position sensor and the horizontal registration motor connected?
a. DC controller PCB (J304) <-> relay connector <-> horizontal registration home position sensor
b. DC controller PCB (J304) <-> relay connector <-> horizontal registration motor
NO: Connect the connectors.
2. Sensor lever (damage and interference), Sensor
Is abnormal noise heard from the horizontal registration assembly in keeping with the motor rotation?
YES: a. The horizontal registration assembly is out of place because of
damage to the sensor lever. Replace the sensor lever.
b. The horizontal registration assembly malfunctions because of the
presence of foreign matter. Remove the foreign matter.
c. The sensor is faulty and cannot detect home position. Replace the
sensor.
3. Horizontal registration motor, DC controller PCB
Is the horizontal registration motor control signal generated by the DC controller PCB?
J304-1/2: 24 V, J304-3/4/5/6: motor excitation signal
YES: The horizontal registration motor is faulty. Replace the motor.
NO: Replace the DC controller PCB. Usually E 051 is the horizonal motor problem, you can take out the pick up ***'y. On the motor have a small gear, sometime this gear broken.
Or the horizontal reg motor became stuck in the wrong position. I was able to manually move it back and rebooted copier. Not sure why the motor was in the wrong position-cust related?

Oct 10, 2009 | Canon imageRUNNER 3300 All-In-One Laser...

1 Answer

Registration


you copy registration, w/out RADF? Or RADF registration adjustment?

Jul 02, 2009 | Sharp AR C250A Color Copier

1 Answer

Flashing red button with a triangle and ! in it . printer won't work


If only the attention light is flashing then follow the guide below -

The Attention (amber)
light is blinking.
Attention error. The top
cover is open.
Close the top cover.
Attention error. The
printer is out of media.
Load media.
Attention error. The
printer has a jam.
1. Clear the jam (see pages 164 through 168).
2. If the location of the jam is not apparent, check
the embedded Web server to find the jam
location.
 If the jam was under the imaging drum, toggle
the registration sensor to check its movement
and replace the registration sensor if it does not
move freely.
 If the jam was in the fuser area, toggle the fuser
exit sensor to check its movement and replace
the fuser exit sensor if it does not move freely.

Jun 07, 2008 | HP Color LaserJet 2550n printer + HP Color...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

381 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18334 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...