Question about Linksys WPSM54G Print Server

1 Answer

WPSM54G Root Hub Issue

Do you know the name of the driver files that Linksys needs to send? I just spent hours on line with them, and the only resolution they could offer was to go to Microsoft to ask them to alter the security permissions? I hope that if i call them back and ask them to send me these specific files, I'll avoid the run around that I just experienced.
Also, do you know which root hub needs to be updated? I don't see a linksys root hub in device manager. after fooling with it for a couple of hours I can get it to print a test page only wired, not wireless. Then once it disconnects it will not recognize the print server at all.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 59 Answers

What u have have to do is ....
> connect print server to router ...
> open the routers page ( 192.168.1.1 )
> open the print servers page ( 192.168.1.115 )
> match the wireless settings ...
> and then it would be working

Posted on Nov 27, 2008

1 Suggested Answer

  • 35 Answers

SOURCE: WPSM54G Root Hub Issue

Hi There.

For Windows XP, the filename is lknuhub_xp and for Vista, the filename is lknuhub_vista. Usually, they will send it in zip format and you will have to extract it then specify the file once you install the print server.

Posted on Aug 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I install WPSM54G on a windows 8 PC


It looks that you would like to install drivers for Linksys WPSM54G.
Please write to us with the answer of the following question.
1) Do you have the driver installation disk with you?
2) Did you try to install the driver?
3) Did you get any error while installing it?

Linksys WPSM54G is not compatible with Windows 8. You can check for the compatibility of any device or software from the Windows Compatibility Center. Please refer to the link given below.
http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Linksys%2BWPSM54G&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14
In Windows 8 you can install software in compatibility mode with previous version of Windows. Please refer to the steps given in the link below under the section "Apply a compatibility mode"
http://windows.microsoft.com/en-IN/windows-8/get-apps-devices-working

I hope your issue gets resolved by now, please write if you still face any issue.

Sep 15, 2013 | Linksys WPSM54G Print Server

1 Answer

WPSM54G linksys printer server software does not install on windows 7. Need a driver.


win 7 has some problems with networking equipment. there is a method for installing the wpsm54 on vista and win 7. go to this link it has a good clear set of directions. good luck, aokcomputer

http://www.ehow.com/how_5396340_set-vista-vista-windows-linux.html

Jul 23, 2010 | Linksys WPSM54G Print Server

1 Answer

HP 5500 printer Prints 99% of page thru WPSM54G with Vista


its not support the high level os files do one thing installed the driver support to vista support from the internet .

Mar 06, 2009 | Linksys WPSM54G Print Server

1 Answer

Driver installation Epson CX9475Fax


all you need to do is disable your antivirus and firewall and run again the installation...
It should work... gud luck!

Oct 18, 2008 | Linksys WPSM54G Print Server

1 Answer

Linksys Wpsm54G print sever


about installing the printserver, you can actually make this work using TCP/IP, so that the print server will not be driver-dependent, just the connection.

BUT, using TCP/IP will only allow you to print through the printserver and not COPY, SCAN or FAX through it.

if you have other questions just lemme know

Sep 12, 2008 | Linksys WPSM54G Print Server

1 Answer

WPSM54G Root Hub Issue


Hi There.

For Windows XP, the filename is lknuhub_xp and for Vista, the filename is lknuhub_vista. Usually, they will send it in zip format and you will have to extract it then specify the file once you install the print server.

Jul 27, 2008 | Linksys WPSM54G Print Server

2 Answers

Initial setup no password


use-ly it is user name is (admin) password is (admin)

Jan 09, 2008 | Linksys WPSM54G Print Server

1 Answer

Printer driver hangs on install


You get a ROOT HUB error when your USB port on your computer needs additional drivers. The print server drivers needs to configure your printer drivers. The only solution for this is CALL LINKSYS TECH SUPPORT. TELL THE TECHNICIAN THAT YOU HAVE A ROOT HUB ERROR. Linksys will send you ADDITIONAL DRIVERS for your root hub. UPDATE your ROOT HUB using the ADDITIONAL DRIVERS. Uninstall the WPSM54G from the add/remove programs. RUN SET UP COMPUTER AGAIN

Dec 02, 2007 | Linksys WPSM54G Print Server

Not finding what you are looking for?
Linksys WPSM54G Print Server Logo

Related Topics:

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Print Servers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1029 Answers

Are you a Linksys Print Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...