Question about Symbol MC50 Pocket PC

2 Answers

Power Button Would you please help me? Could you please help me with the Power Button ..........................I have pushed each one and I still haven't gotten it started yet. Thank you in advance for your help. Oh yea I forgot to mention the product: Symbol hand held PC

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

First thing to check is the hard power button on the back to the top right of the battery of the MC50 switched to the right with no red showing?

Posted on Sep 02, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Check the lock switch on the right hand side of the unit isn't locked, give the handset a full overnight charge, and if it still won't power on, a cold reset (which will destroy anyunsaved data) may be required t bring it back to life.

Posted on May 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i perform a hard reset on my palm pda


  1. Step 1 Straighten a paper clip into a single line.
  2. Step 2 Locate the "Reset" button by spotting a small hole on the backside of the Palm Zire 31.
  3. Step 3 Push the power button on the Palm Zire 31 with your finger and hold it down steadily.
  4. Step 4 Push the paper clip into the "Reset" button's hole while holding down the power button.
  5. Step 5 Release the power button once the screen displays the "Palm Powered" logo.
  6. Step 6 Push the navigational key in the "Up" direction to complete the Palm Zire 31 hard reset.

May 26, 2010 | Palm Zire 31 Handheld

1 Answer

Power of/on button not working.


You have probably gotten some sticky liquid, ie: coffee or pop, under some of the keypad area. Causes some to stick down and others not to work when pushed. You have to have someone take it apart to the keypad and clean the contact surfaces. Should get you back up to 100%. Or take it back in warantee and have them replace it.

Sep 10, 2009 | HTC P4350 Smartphone

1 Answer

Dell x50v won't turn on


while pushing the power button , push reset button for couple of seconds. hope that helps as that is what worked with mine.

Jun 11, 2009 | Dell Axim X50v Pocket PC

1 Answer

Palm TX handheld


First you need to reset the TX:
hold the reset button on the back of the unit, then turn the power on. Hold the power button while releasing the reset button. The TX will power up to the screen where it will ask you if you want to reset it to factory default.
Afterwards go to this link,

http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=1568,E=0000000000263321976,K=3877,Sxi=4,case=obj(32859)

and download the Palm Desktop/Sync software and install it onto your PC. After installing the the Palm Destop software, connect the sync cable to the PC via the USB, then connect the cable to the TX and push the sync button.

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Mar 29, 2009 | Palm TX Handheld

1 Answer

Fatal alert


This is a common problem with the Tungsten line, You can try doing a hard reset. This worked for my E2. If that doesn't work, the battery must be removed for a few hours. Although it still may not work after the battery removal.

** To preform a hard reset, hold down the power button, and push the reset button on the back of the unit. The top of your stylus unscrews to expose a "plastic pin" for this purpose. Keep holding down the reset button while the unit reboots. You should see a palm screen displayed while it restarts, let go of the power button and follow the instructions. Pressing up on the pad ring should erase all data.

Feb 20, 2009 | Palm Tungsten T5 - Multilingual Handheld

2 Answers

White screen


how do you flash the firmware using pc. can u tell the procedure

Apr 27, 2008 | Nokia 9300 Smartphone

3 Answers

While charging my O2 atom exec, the LED (Flash light) does not glow red ?


I have the same problem. What I did several time is to actually shut down the phone, remove the battery and leave it like that for several hours (3 to 4 hours). Then, I put the battery back in the phone, and it would charge again. However, due to the long time with no battery, the phone's clock would be reset to January 2007.

I found no other work around right now. However, I have to do this more and more often, almost once a week ...

Mar 21, 2008 | O2 Xda Atom Exec Smartphone

4 Answers

PDA is totally black; not charging


The easiest solutions are easily overlooked. 1. Check your charger; a cheap multimeter will do for the voltage check. If the voltage (dc) written on the back of the charger is what you get at the plug, go to (2),if not, change your charger,problem solved. 2.You either have a messed up screen or battery. 3. Check the voltage at your battery terminals after charging the battery for like 1hr. If you do not get a resonable read; 2-5v ,just trash the battery and head for the nearest shop to get a fresh one.In case your battery reads okay,your screen or worse, one of the components on the board of the set has gone kaput.

Nov 14, 2006 | Palm Zire 71 Handheld

4 Answers

Password forgotten


To do a hard reset:
1
Press the Power button to turn the Axim unit On.
2
Press and hold the Power button down while using the Axim stylus to
press the Reset button at the same time.
3
Release the Power button and the Reset button.
TheTo clear all data in the memory screen appears.
4
Press the Contacts button on the Axim to delete all of the data in the
memory of the Axim handheld.
5
Press the Mailbutton on the Axim to cancel the operation without
losing data.

Sep 14, 2005 | Philips Nino 210

Not finding what you are looking for?
Symbol MC50 Pocket PC Logo

Related Topics:

395 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symbol PDAs Experts

Ngoro
Ngoro

Level 3 Expert

1111 Answers

Bob Sloan

Level 3 Expert

2013 Answers

Ravi

Level 3 Expert

1678 Answers

Are you a Symbol PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...