Hobart D340-6007 Mixer Logo

Related Topics:

Posted on Aug 29, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Hobart L-800 Mixer is rotating in the wrong direction

Need to find out which wires need to be reversed

  • billglah Sep 04, 2008

    There are 3 wires coming into the mixer from the power supply

    The green one is a ground wire. I switched the white and black wires and the mixer still turned the wrong way. The white wire is attached to the left side and the black wire is attached to the right side. The center of the connection has a red wire attached to it.

  • billglah Dec 11, 2008

    It is not a 3 phase

×

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 41 Answers
  • Posted on Dec 09, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Dec 07, 2008
Answers
41
Questions
0
Helped
24474
Points
55

If it is 3 ph. switch 2 lead wires

  • Anonymous Dec 12, 2008

    it cant rotate backwards if it is sigle phase. is your L800 a brush motor or new style have you had it apart?

×

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 640 Answers
  • Posted on Sep 04, 2008
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Jul 31, 2007
Answers
640
Questions
1
Helped
441164
Points
1475

Doesnt matter,just switch any 2 power wires.

Ad

2 Related Answers

Capt Rick

  • 81 Answers
  • Posted on May 31, 2008

SOURCE: NEED A WIRING DIAGRAM FOR A A200 HOBART MIXER

I have a wiring diagram for the standard A-200. If you send me your e-mail to me I will send it to you. [email protected]

Ad

vestxre

  • 120 Answers
  • Posted on Jul 16, 2010

SOURCE: I need diagram of gearbox for Hobart d330 mixer

Parts manuals are available for viewing and free download at www.hobartservice.com

Testimonial: "I know,ust can't find them. If you could explain to me how, I would appreciate it"

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

How to invert motor turning direction?

Hobart A200 Stand Mixer
Beatriz, I looked through the entire manual, it shows no reverse option. Did you just get the mixer or did you have it repaired. It seams the mixer is either wired wrong or the gears that rotate the mixer were not assembled correctly.
Check the attached link,manual,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

https://my.hobartcorp.com/kroger/TechnicalServiceManuals/A200%20Technical%20Manual.pdf

A200 Hobart Service
0helpful
1answer

Three of my hobart mixers are spining wrong what is the problem

These must be 3 phase mixers (electrically there are two choices, single and three phase) Three phase cables typically have 4 wires, black, white, red and green (green is ground of course) To reverse the rotation of your mixers you would have to swap two of the three colors, and it doesn't matter which two of the three you choose, DO NOT SWAP THE GREEN, LEAVE IT ALONE. for example, just change red and black wires where it they connect to the plug. Of course turn off the power, unplug the the mixer, and usually you can take the plug apart and reverse the wires. If your units are hardwired you should call an electrician in to do it, it will only take a couple of minutes. cf652f29-33fe-4eee-8e37-1addfd1bcb1a.jpg aec28350-7e8b-4d45-a617-78e7a23dbf21.jpg
0helpful
1answer

Seemingly well maintained H600 mixer only runs in reverse...

whoever wired the mixer in , hopefully 3-phase made a mistake on the incoming pwr to term block or the contactor switch any 2 leads this should reverse rotation of the mixer
0helpful
1answer

I have a Hobart 80 qt. stand pizza dough mixer that has lost forward speed, and only works in reverse. Is this electrical controls or a gear problem?

if the mixer is a 3-phase unit, that mixer has no reverse speeds, all gears should turncounter-clockwise when mixer is on ,if a 3-phase unit try switching any 2 of the incomingline to to change direction
3helpful
2answers

Electrical connection of hobart h600

it requires 3 phase with ground it is a four wire system
0helpful
2answers
0helpful
1answer

Hobart L-800 Mixer is rotating in the wrong direction

Take the top cover off.Trace the plug going into the top,there will be 4 wires,leave the green wire alone.Unplug the mixer and any 2 wires reverse them that should do the trick.
Aug 29, 2008 • Food Mixers
2helpful
2answers

Hobart A-200 Motor Direction

No, do not swap hot and N.

First, verify rotation. As the attachment shaft rotates, it should push the engagement pin into the keeper slot. Looking down on top of the mixer, the planetary should rotate clockwise.

If the unit runs backwards, does it start slow? Can you get it to run either way by giving it a push start before turning on the power? If so, your start switch is not working properly. (Which is my guess) Check your capacitor.

There is mechanical and electronic start switches. (Metal arms and a contact or a little gold rectangular metal can.)

Check it out and let me know what you find -- Mike
0helpful
4answers

NEED A WIRING DIAGRAM FOR A A200 HOBART MIXER

I had a look on google and came up with a service manual. not sure if this has the wiring diagram but the only other thing i can suggest is to contact te manufacturer direct. Go to http://cgi.ebay.com/HOBART-A200-20-QUART-MIXER-SERVICE-PARTS-MANUAL_W0QQitemZ160203114233QQcmdZViewItem
hope this helps.
Not finding what you are looking for?

873 views

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

vince

Level 3 Expert

2530 Answers

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...