Question about Philips 9P5534C 55" Rear Projection Television

1 Answer

Magnavox 9P5534C103 My projection tv has sound but not a picture. If I put some heat on the back of the set the picture will eventually come around . As soon as the heat is removed the picture then begins to pulse away again, while the sound never changes. Also when the picture is there all the adjustments seem to work okay.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Philips Master
  • 3,459 Answers


Its a common problem with model. Check the site www.TvRepairKits.com for a fix.

Posted on Oct 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Phillips Magnavox 9P5534C103 need to replace Ics


Check with TV repair.com who sells kits for most of these sets that come with all the needed parts and instructions---you might also look on You Tube who has video instructions for a lot.

This is a older set and the chips will either be on large board to left as seen from rear or to the far right side as seen from rear--the chips are soldered in STK-392-110 OR -120 CHIPS. I can give general instructions if know where they are and what number is printed on the front of them.

Oct 23, 2012 | Philips Projection Televisions

2 Answers

Regular picture size shrinks and color fades


This is a common problem on certain models of Philips Magnavox TV sets. The most common symptom is the screen will shrink and expand over and over. After the TV heats up for a while the video will work like normal. After a few weeks or months your TV will eventually stop working and not have video. You can get complete parts and instructions from www.TvRepairKits.com

Jan 01, 2010 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

I have a phillip magnavox that needs a color tube but I need the part number so that I can order it. The model number is 9p5534c103 can you help?


Which Tube is it that you need? Look on Encompass Parts Distrb. they have Blue and Green Tube Price is 204.46 1-800-638-3328 And are you sure Tube is Bad Most of the time they have Bad coolant Fuild that needs to be changed For projection coolant fuild,$6.50 a Bottle you need at least 4=$24.00 plus shipping With TV on and playing Look down inside top of ubes if you cannot see picture clearly then chage out the coolant Fuild.It means old fuild is Bad! Mats Electronics 1-800-628-1118

Nov 10, 2009 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

1 Answer

No sound or picture on magnavox tv


Hi and welcome to fixya, it is the colour wheel problem,,,,,,,,,this is common problem please check it ...it may be also cathode ray tube... thank u.........

Jun 03, 2009 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Picture shrinks to only show top half


This is a common problem on certain models of Philips Magnavox TV sets. The most common symptom is the screen will shrink and expand over and over. After the TV heats up for a while the video will work like normal. After a few weeks or months your TV will eventually stop working and not have video. You can get complete parts and instructions from www.TvRepairKits.com

May 26, 2009 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

I have a magnavox projection tv...picture /no sound


I put new batteries in the remote and reset the cable box.

Mar 27, 2009 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

1 Answer

Philips-Magnavox 9P5534C103 55IN. PEAR PROJECTION


TV does not display picture on whole screen....it has three smaller colored rings with the picture inside of it

Jun 01, 2008 | Projection Televisions

1 Answer

No picture or sound


There is really know way to determine cost. most repair shops will charge at least 100 doolars or more just to go look at the set. something in the power supply either stanby or start up circuitry would be my quess. Do you have any trouble shooting skills? Do you have the service manual?

Apr 26, 2008 | Projection Televisions

4 Answers

Magnavox Plasma HDTV Red light


I had a similar problem with my magnavox tv with the blinking light issue. Eventually it just didn't come one anymore. Looking at other forms they said the problem was a bad capacitor number 2074 located on the power supply board. When I opened my tv, I noticed that the capacitor was bulging and burnt up. I bought a new one labeled 2200uf 35v and did some solder to attach the new piece. Put the tv back together and it works like new. No more blinking light. I hope this helps.

Feb 02, 2008 | Philips Magnavox 51MP392H Rear Projection...

Not finding what you are looking for?
Philips 9P5534C 55" Rear Projection Television Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68197 Answers

Are you a Philips Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...