An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert who has achieved Level 3.
Re: AF assist light
No, it doesn't have an AF assist light, but it hardly ever needs one - f1.8 is the widest aperture on any digicam (and also on the 3040 and 4040 of course) apart from the really expensive interchangeable lens SLRs. The maximum aperture is gradually reduced to f2.6 at the full tele end of the zoom, but even that's better than most, and since the focusing is always done wide open (whatever aperture will actually be used to expose the shot), the camera "sees" very well to focus in low light.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You are possibly using an Fulltime AF mode for focussing.See user manual page 34 or the AF mode is set to AF Tracking. If these modi are set, the camera continuously tries to focus on the subject, hence the sound.
This is the AF Assist feature. If you don't have a hot-shoe flash mounted, but you do have the pop-up flash raised, the camera will strobe the pop-up flash in low-light situations to provide illumination for the auto-focus to work. You can disable it by turning off the AF ILLUMINATOR option in the "Wrench 1" settings menu.
The secondary small mirror that guides the light from the lens to the sensors ( sensors sit at the bottom of the mirror box , underneeth the main mirror ) may be out of position. To check : take lens off and gently lift the main mirror half way up ( pushing up ) and see if the secondary mirror is dangling ( which it should not be doing ).
Correct 1) reingage spring 2) reingage hinge.