Question about Projection Televisions

2 Answers

My Daewoo sv900 is scanning but not finding any channels

Posted by on

  • trumpet900 Nov 04, 2008

    I too have the same problem with two SV900's. They are both now in a cardboard box in the garage, whilst I work out what to do with them!


  • linda_bowen2 Nov 19, 2008

    I suddenly had no TV channels. A message on screen says my EPG subscription has expired (I didn't know I had a subscription or that it had an end date!) and to purchase a lifetime subscription for £4.99 I should phone 0871 220 9563. However, this phone number is unobtainable. Anyone know what I can do now?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I owned a Daewoo VCR/Digital Receiver SV900 which was wiped out by the last change.
I started complaining to Daewoo who at first were not keen to get involved - I kept on at them and I negotiated with Daewoo for a replacement -

I ended up with a DSD9503TFB which is a twin Freeview tuner with PIP and a 160 GB Hard disk - I paid a cash balance of £ 15 as at first they wanted to give me a cheaper unit.

So it shows that if you complain loud enough ‘you do get results’

The DSD9503TFB arrived the other day and they picked up the SV900.

The picture quality is more Colourful than my other units so I had to tone it down a bit. { I can view seven other Freeview unit so its easy to do a comparison }

So far the Hard disk is silent and the Recording quality is excellent.

It was such good PVR I bought another one which will arrive on Monday.

All in all a ‘ Good result ‘ and ' I am not the only one '

So if you have a genuine Claim against Daewoo I would advise that you keep at them - they take ages to reply to e-mails but stick with it.

contact colin.millard@desuk.co.uk and quote ' Split NIT '

I have listed the Pro's and Con's of the DSD9503TFB at
http://www.wbc-team.co.uk/Daewoo-review-2.html

Posted on Sep 27, 2008

This is caused by an upgrade to the Freeview system.
Visit www.freeview.co.uk/help/faq/id104963

Posted on Sep 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I scan for channels on my TV, it doesn find any


one of two reasons either there is no signal coming from your source as in cable or antenna . or the 2nd you have a defective tuner and would require repair . one other thought is if you have a cable box with composite output or HDMI you could go direct to that source for signal

Oct 19, 2014 | Projection Televisions

1 Answer

Digital tv tuner not displaying picture


. Try putting you tv set to channel 3 or 4. Try your tv in all modes. Check the back also to see if in the right spots with the wires. Check your channel scan status, try it on anntena and try it on cable, run channel scan on both. good luck. Try vcr wires if cable wires dont work. vcr wires are yellow red and white. Try another cable cord sometimes they get old. Try looking at your remote and setting it to tv.

Sep 02, 2012 | Panasonic PT-50LCX63 50" Rear Projection...

1 Answer

Tv won't scan channels when connected to cable tv


Hello
The first thing is to try going in the tv's menu
It should be similar to this:
Menu>setup>channel setup

once you find something similar, run the channel setup and it should add in the channels

If that doesn't work, screw on the cable wire, unplug the tv for a good few minutes, then replug the tv and it should automatically scan



Hope this helps
-Chris

May 01, 2009 | Projection Televisions

1 Answer

Daewoo ds608p cka not picking up a signal have scanned several times but not finding any channels?


I have not resolved the problem i am waiting for you to come back to me! I was given the option of signing up for the premium plan which i declined so presumably i will not get the free advice offered?

Aug 29, 2008 | Projection Televisions

1 Answer

I have a Daewoo DS608P Freeview box which will not detect any chennels. The pre=scan and scan appear normal, but nothing is detected. The TV, which has no Scart socket, works fine on analogue, and I have...


Sorry to be the bringer of bad news but the transmission mode in the uk is changing & that is why your box will not pick up any channels have a look on http://www.freeview.co.uk/help/faq/id104963 I'm affraid your box is finnished.

Jul 25, 2008 | Projection Televisions

2 Answers

No channels can be detected have tried 2 Daewoo DS608P boxes connected to same telly but same thing happens. Signal strength seems fine boxes have been working fine for years.


I am the same. Not a sausage from my same model Daewoo freeview box today. Scans and re-scans and not a single channel to be detected.
Rob

Jul 05, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...