Question about Dryers

1 Answer

How to fit a belt on a tumble dryer

How do i fit the belt on my tumble dryer indesit 30630

Posted by on

  • 2 more comments 
  • Anonymous Mar 12, 2014

    indesit tumble dryer not collecting water

  • Anonymous Mar 19, 2014

    dryer won't tumble

  • Anonymous Mar 27, 2014

    tumble dryer belt model awz7303

  • Anonymous Mar 31, 2014

    tumbles empty, bearings are not locked up replaced belt

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 550 Answers

Unplug the dryer,
220v is not fun
dryers are generic inside, regardless of maker
while you got it apart to replace the belt is a good time to clean out exhaust vent pipes and the squirrel cage fan, no lint, better air flow, less $$ to run
how to fit a belt on a tumble dryer - 3cd9043.jpg the tensioner may push Up on the lower run.

  • open case, most front panels are removed including door, remember to disconnect door switch wires, set panel aside
  • pull drum out
  • check drum support rollers
  • check drum felts, bushes guides
  • locate tensioner pulley, belts have been known to pull them out of the mounting when it breaks, check , reinstall if out
  • pick up broken belt off floor of case
  • take belt to parts store and match it, despite the huge number of dryer models there are very few belts.
  • If any felts or rollers are worn,stuck,damaged take them too to the parts store, and replace in pairs, despite the huge number of dryer models there are very few rollers or felts
  • after ensuring rollers anf felts and bearings are serviceable, loop new belt around drum at the wear mark from prior installation, reinsert drum
  • loop new belt around motor pulley.
  • pull tensioner pulley against spring to end of motion
  • loop belt around tensioner pulley
  • allow tensioner to slowly move back by spring tension till the belt is taut
put front panel back on, plugging in door switch
plug in mains
dry clothes
takes longer to type than to do

Posted on Aug 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to put belt on hotpoint dryer


Dryer Belt Replacement - YouTube

? 6:23
https://www.youtube.com/watch?v=dFB4vnmADh0
Jun 20, 2011 - Uploaded by Repairs101
How to do-it-yourself instructional on changing the drive belt on an electric ... She wanted to know about replacing the drive beltin her clothes dryer. ..... How to replace tumble dryer beltHotpoint, Indesit, Ariston, Creda, Proline ...

How to replace tumble dryer belt Hotpoint, Indesit, Ariston ...

? 9:36
https://www.youtube.com/watch?v=kNJGHyEPiJA
Jan 30, 2014 - Uploaded by how-2-repair.com
How to replace tumble dryer belt Hotpoint, Indesit, Ariston, Creda, .... to get right and the grooves correspond to the drive, so really obvious..

Dryer Drive Belt (part #WE12M29) - How To Replace ...

? 5:14
https://www.youtube.com/watch?v=ZXSJlWcZPiY
Oct 25, 2013 - Uploaded by AppliancePartsPros
Buy the new Dryer Drive Belt WE12M29 ... to replace the Dryer Drive Belt WE12M29 on GE, Hotpoint, RCA, Sears, and Kenmore dryers.


Jan 01, 2016 | Hotpoint Dryers

1 Answer

How to fit belt on Creda Reversair 37643 Tumble dryer


New belt is very tight, so you have to use more strength. Put it on motor and all other on "drum". Spin it easily and slowly but with strength until its done.


Be carefully, use gloves.

Apr 13, 2013 | Indesit Hotpoint Creda Tumble Dryer Belt...

1 Answer

How to access belt on indesit idv65 tumble dryer


Indesit tumble dryer not turning? How to replace a Indesit tumble dryer belt.
This video will show you how to replace a tumble dryer belt in your appliance
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question. Tumble Dryer Belts How to Repair Home Appliances

Jun 22, 2012 | Dryers

1 Answer

How to fit a drive belt to a indesit g511v tumble dryer


http://www.apart4u.co.uk/video-tutorials/tumble-dryer-repairs/how-to-replace-a-belt-on-a-tumble-dryer-stretch-type.html

Hi the above web page is a good general instruction video on how to change a tumble dryer belt, should help, if it does please remember to rate me

Feb 24, 2011 | Dryers

2 Answers

Fitted a new belt to indesit is60v tumble dryer, worked for a few seconds and now does'nt work at all, just makes a buzing sound?


Check that the belt has not fallen off ...does the drum turn by hand easy if so then its fallen off .Motor could also have jammed....

Feb 10, 2011 | Dryers

1 Answer

How do i fit new belt to my indesit tumble dryer


its easy, firstly wrap the belt round the motor spindle, feed the belt around the drum drive as much as you can, then turn the drum by hand and it ease the belt on as you turn it, be careful not to pinch your finger.

Mar 25, 2010 | Dryers

2 Answers

How to change a belt on hotpoint tdl54 tumble dryer


The belt goes around the pulley of the motor after fitting it around the drum first.

Mar 23, 2010 | Hotpoint Dryers

2 Answers

Indesit is60v tumble dryer is not spinning although still heats, would this need a new belt?


Indesit tumble dryer not turning? How to replace a Indesit tumble dryer belt.
This video will show you how to replace a tumble dryer belt in your appliance
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question. Tumble Dryer Belts from How to Repair Home Appliances

Jan 18, 2010 | Dryers

1 Answer

How do i replace drive belt on an indesit is60v tumble dryer please


Indesit tumble dryer not turning? How to replace a Indesit tumble dryer belt.
This video will show you how to replace a tumble dryer belt in your appliance
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question. Tumble Dryer Belts from How to Repair Home Appliances

Sep 09, 2009 | Dryers

2 Answers

Indesit is60v dryer


Indesit tumble dryer not turning? How to replace a Indesit tumble dryer belt.
This video will show you how to replace a tumble dryer belt in your appliance
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question. Tumble Dryer Belts Archives How to Repair Home Appliances

Nov 30, 2007 | Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

2,241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Brad Brown

Level 3 Expert

15133 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...