Question about Vizio P2 42 in. HD-Ready Plasma Television

1 Answer

Ww42lhdtv10a my sound is low on some channels and I have to turn volume all the way up,but on other channels it comes through ok. Do you know the part number of the part I need and where I can order it?

Posted by on

  • kaybird143 Oct 13, 2008

    My husband was watching tv - picked up the control to change channels - I'm not sure what button he hit - wasn't the mute - but now we have no sound on our tv - please help

  • kennkim Feb 05, 2009

    Some of my channels have no volume. No rhyme or reason for which channels. I even have one channel that has the show is now in spanish and the commercial in english. Not a cable issue as the other tv in the house does not do the same thing. Any ideas???



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 41 Answers

Turn off the sound options you have active in the customer menu see if that fixes it first.

Posted on Oct 08, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I just bought a Behringer K3000FX amp and it sounds GREAT with my keyboard. However, just bought a Shure SM48S voice mic and it just doesn't come thru the amp with much volumn...have to turn amp

Greetings! Ok, your amp has an XLR (3-prong) Low-Impedance input on Channel 1 for a Mic. All the other inputs are 1/4" High Impedance inputs, which are for instruments and/or other High Impedance items including low quality High Impedance Microphones. The SM48S is a high quality Low Impedance microphone, so if you use it with a 1/4" plug, it will be in a High Impedance channel, and will be very LOW in volume in comparison with everything else. So, you must use an XLR (3 prong) cable from the Mic to the Channel 1 input on your amp. That will do the trick. Good Luck with your new amp and Mic!

Dec 02, 2017 | Behringer Ultratone K3000fx 300w Keyboard...

1 Answer

My Polaroid 1911 TXLB 19in television is not working properly. The volume is very very very low. We have a DVD player hook up to it and its been working fine. Last nite was working, shut it off and today...

check the Sounds with Local TV channels.Is it still low?If it is still low sound circuit has to be repaired.if it is ok,sound switching circuit has to be repaired(TV to Video)

Jun 14, 2011 | Televison & Video

1 Answer

When i turn the volume up from my sony receiver strda3400es de protection comes in. By lower volumes it works ok.

Measure load resistance. That is the output connected resistance. If it is too low than normal this type of protection will be activated. Measure the impedence [resistance] of speakers connected to the output. It must be more than 4 ohms/channel effectively. OK.

May 17, 2011 | Sony STR-DA3400ES Receiver

1 Answer

I have very low sound on my asus x533 even when i plug in my sony mdr-xd100 headphones in please help

Click on start. Click on control panel. Double click on sounds and audio devices. Click the volume tab. Under the device volume, move the volume slider from low to high. click OK. Check the volume. If there is nothing else wrong, your volume should be good now.

Jan 29, 2010 | Intel Asus P4PE2-X 533MHz FSB 845PE...

1 Answer

Volume at 10 produces very low speaker output.!?

It sounds to me that all you are getting is the pre-amp stage of the amp and nothing from the power amp stage. As it is on both channels then it is something that is common to both. This could be something to do with the power supply of the power stage. Or whatever is on the heatsink. It could be that the amp uses a single audio amp IC for both channels. If it does my bet is that it's gone. If it uses two sets of semiconductors for the right & left channel it would be highly unlikely that both channels have gone, but not impossible.

Dec 27, 2009 | Audio Players & Recorders

1 Answer

Low volume on some channels

Well, some TV stations do broadcast at different volume levels. This is very noticeable when watching a TV show and the volume seems normal and then when a commercial comes on, the volume is very loud. They do this to get you to pay attention to the commercial. Another problem might be that you are adjusting volume from both your TV and your cable box. What you should do is make sure your cable box is set to "FIXED VOLUME" and then just adjust your TV volume. Fixed volume will have the cable box output only one volume level, letting the TV do the adjustment. Just go through your cable box setting and look in the audio settings. Hope This helps...

Mar 14, 2009 | Element Electronics FLX3711B 37 in. LCD TV

1 Answer

Kenwood VR 505 low sound in center channel

if the cables are ok and the speaker are ok also beside good setting you will have a problem of the output stage in your receiver.

May 06, 2008 | Kenwood VR-505 Receiver

1 Answer

Low volume on the dvd player

hi, guys, you are controlling the windows settings for the sound card, thats ok, but u need to chech if the DVD sound settings are set to surround 5.1 channel, now where the settings are will depend on what player u are using. let me know guys??

Dec 31, 2007 | Acer Aspire 3610 Notebook

1 Answer

Samson Servo 170 - 1 dodgy channel

Dec 02, 2007 | Samson Servo 170 Amplifier

Not finding what you are looking for?
Vizio P2 42 in. HD-Ready Plasma Television Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vizio Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74999 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Vizio Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides