Question about HP LaserJet 4650 Color Printer

3 Answers

ERROR CODE 81.018,E101

Hi do you know whet the roor code 81,018,e101 is on a LJ4600

Thanks

Ian

Posted by on

  • WALID Dec 02, 2012

    REMOVE THE BATEERY IN THE CARD AND DO COLD RESET

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

According to my reserarch this error usually refers to an EIO card error in slot 1.
you could try reseating the card , maybe in another slot.
A firmware upgrade could help.
if those don't help it may need a new card.it can't hurt to check any cables, make sure nothing is lose
Angela

Posted on Aug 29, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • HP Expert
  • 141 Answers

The 81 error is either a defective network card, firmware dimm, hard drive (if equipped), or formatter board. Good luck!

Posted on Sep 16, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My printer have an error he make to her display error 5415. can you give the solution please§

Posted on Sep 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have hp designjet z6100, when turn power on it gives empty box on display, and nothing else.


Hi so no error code? I'm sorry to say without an error code to point to the fault is not not going to be a simple job,
I make a living repairing designjets but I'm not supported by Hp, my best advise would be to email Hp and ask for a Maine agent in your area then pin them down to a price to come out and give you a quotation for the repair on your plotter
Yours Ian
Ps if this has been useful please rate me

Mar 10, 2011 | HP Designjet Z6100 InkJet Printer

1 Answer

My machine is ricoh FT 4220. error 11 or E1


E101: Exposure lamp error
1- check the Exposure lamp if it damage replace it .
2- check the Exposure lamp fuse ( located in scanner )
3- check the Exposure harness .
and after you solve your problem you must
Enter SP5-810 (SC code reset) and press the Enter key to reset the code

Jan 04, 2011 | Ricoh FT3713 Copier

2 Answers

I have a canon GP215 and it give error code e101. what am i supposed to do


Hi,
The error code indicates that there is a fuser failure. You will need to have it replaced.
You need to contact canon to get one for you .

Hope this helps.

Dec 16, 2009 | Canon GP-200 All-In-One Printer

1 Answer

Error code e-1 for Ricoh FT 4522


we don't have e-1 code but we do have e101,if my one is correct,there have few steps to follow;
1,press "clear modes"
2, press 107
3, press and hold down'clear/stop" key
4, enter 5 press start
5,enter810 press start
6, turn power off and on

Dec 11, 2008 | Printers & Copiers

1 Answer

Printer Error(Sato Cl 408 e)


PROBLEMA EN AJUSTAR EL CORTE DE LA ETIQUETA, CUANDO LA IMPRESORA SENSA LA ETIQUETA, ESTA QUE CORRIDA HACIA LA PARTE DE ATRAS DEL CABEZAL HACIENDO NECESARIO UN FEED PARA PODER CORTAR LA ETIQUETA


Jul 05, 2008 | SATO CL408e Thermal Printer

2 Answers

Panasonic Workio DP-1820 error code E4-01


error code E4-01 means you have a fuser warm-up temperature problem. try a lbp fuser reset in service mode. i dont know what you password is so i cant tell you how to get there but good luck

Apr 16, 2008 | Panasonic Workio DP-1820E Copier

3 Answers

Epson r300 printer


step1..............switch on
step2............press+hold stop,ink,power buttons untill printer switches self of
step3............switch back on and problems should have gone

Aug 21, 2007 | Epson Stylus Photo R300 InkJet Printer

Not finding what you are looking for?
HP LaserJet 4650 Color Printer Logo

2,112 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96576 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...