The power will come on, and it shows the timer, but when we press the button to start it, it starts making this ding, and has a code appearing on the screen, the first letter looks like and upside down F or a capital E with the top cut off, and after that it has the number 5. Please help us!!

This is not an error code you have accidently activated the delay timer. This timer delays the start of your wash programme & can be set between 1 & 24 hours so a wash can be done overnight or when at work for example.

To deactivate the timer press the delay timer button until it shows '00' (sometimes +/- buttons)

OXO doesn't provide a link to download the instruction booklet for this model, but I own it too, and this is what I've learned:


To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

I also own this model, and the manual isn't availble on OXO's site. But this is what I've learned over the years:



To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

This is the only timer model OXO doesn't provide for download on their site. But I also own this timer, and this is what I've learned:


To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

I'm assuming that you're referring to OXO's model #1061978 and it's the only timer manual not available on their website. But I also own one, and this is what I've learned:



To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

I own this model also and OXO doesn't offer the manual online. So here's what I've learned to do:




To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

Operating functions:
To set the clock, press and hold the clock/timer button for three seconds. A clock icon will appear on the left side of the screen. Input the time using the numerical buttons and then click the clock/timer button to save the time.
To set the timer, press and release the clock/timer button so that the display shows all zeroes. Enter the desired time using the keypad. Press start/stop to start the countdown. The countdown may be paused by pressing the stop/start button and resumed by pressing the same button again.
When countdown is complete, timer will beep continuously for thirty seconds and display will flash. Timer will then beep every ten seconds for ten minutes until the stop/start button is pressed.
This timer will also time up to time activities. To start count up, press clear/memory so timer reads all zeroes. Press stop/start and a plus sign will appear on the right side of the screen as the timer begins counting up.

SETTING NOMA N1506 TIMER

Plug in timer – The letter C will Flash

TO SET CURRENT TIME:
Press Time Button – It will advance to 1 a.m.
Continue pressing until right time to the nearest hour.
(NOTE: A dot at the bottom right corner of the display indicates P.M. hours).

TO SET ON AND OFF TIMES FOR TIMER OPERATIONS:
Press Mode button – Letter P will flash inviting you to set the program
Press Time button repeatedly until required staring time appears in the window. (starting time is now displayed).
Press Mode button again – the letter E now flashes.
Press time button repeatedly until required ending time appears in the window. (Note: a dot at the bottom right corner of the display indicates P.M.hours).
Press Mode button and the display returns to the current time.

Programming is now complete. You may now plug in whatever needs to be turned on. The device will turn on and off automatically every day at the times you have just selected.

TO REVIEW THE PROGRAM
Press time button – Displays successively, for 1-2 seconds each: P, starting hour and E, ending hour. Then returns to show the current time..

TO CHANGE YOUR PROGRAM
Unplug the timer, which will discontinue the current program. After 10 seconds, plug it in again and proceed to set current time. Then continue with the programming steps as above.

FOR MANUAL OVERRIDE
Pressing the Mode button at any time will turn on the devices plugged into the timer. The display will indicate the letter O. The devices will remain on until the ending time of the daily program. To return the timer to the automatic mode prior to that hour, press the Mode button again. The display will return to show the current time.

AFTER A POWER INTERRUPTION/FAILURE
The timer will return to displaying a flashing C and the devices plugged into it will be off.

DING DING SOUND USALLY MEANS END OF CYCLE. MAY NEED TO ORDER MMC AN CHANGE THAT