Question about Hotpoint NBXR463EBWW Electric Dryer

1 Answer

Installing heating element on Asko 7305

I have just purchased a new heating element for my dryer and I'm stuck at how it goes back on. I was not the one that took it off, so i'm not sure how it was attached, but i think i kind of get the idea. But, there are 2 metal bracket, type things, that i'm not 100% sure on where they go. I can see where 1 would work but not 2. Has anyone installed one before?

Posted by on

  • 30cclark Dec 13, 2008

    kenmore model #86161100
    have 4 wires 3 red 1 blue where does the two red on heating element



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Director Badge:

    Uploaded 100 video answers.

  • Expert
  • 213 Answers

This video might help you with fitting an element

You-Tube video "h_WMwQ-M33A" placeholder (do not delete)

Posted on Jan 07, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a Asko 7305 dryer,can I have a regular 240volt dryer cord put on it, so I can use existing wall receptacle ?

I think you are asking if you can change the cord from 220 amp to 110 amp so you can use a 110 wall receptacle...NO you cannot not.It would also probably start a fire

May 13, 2015 | Asko Dryers

1 Answer

We just replaced the heat element still no heat any ideas

Contact asko... did you check the power going to the heating element. Or the control panel. If the unit doesn't know to work it won't I would check everything form the heating unit back

Sep 03, 2014 | Asko TL751 Electric Dryer

1 Answer

I have an Asko 7305 Dryer that keeps tripping the fuse. When I put a load in to dry, it will run for a few minutes, then stop. I push the black button in the back and it will come back on for a few, then...

either the motors overloaded from clothes load size,the motor bearings are getting tight from lack of lubrication, or the dryer heating element is beginning to short out to the case and grounding itself and tripping the fuse

Jul 04, 2011 | Dryers

1 Answer

I need a power plug for my asko 7305 dryer and can not find one anywhere

Assuming that you need a 220V connector, they can be purchased at home Depot. They are generally made with about three feet of cable attached. you will have to take the back plate off of the dryer and attach the three leads to the proper termination.

Jan 23, 2011 | Asko Dryers

1 Answer

When drying a load of clothes the dryer (Asko 7305) simply quit and when I came back to the unit the clothes were dry, but the digital panel was dark and no power available to the unit. I have pushed the...

Hello Susan, Welcome to FixYa. Have you checked to see if perhaps one or both of the fuses may have blown at the back of the unit...I don't mean the hi-limit that you already referred to...I mean the in-line fuses the Asko machines are equipped with. Let me know and we can move forward from here. Regards, Macmarkus :)

Sep 12, 2010 | Asko T761 Electric Dryer

1 Answer

I need a rubber gasket that goes around the lint filter on an Asko 7305. It is available? If so, what is the price delivered to California. Thanks.

Go to the part you need is around $15 and the shipping is good on that site I have bought alot of items from them and are great dealer .....

Nov 17, 2009 | Asko Dryers

1 Answer

Asko 7305 dryer keeps tripping out hi-limit on back of unit please help

make sure that the heating element is not shorted to the cabinet. Usually when you replace the hi limit you should replace the thermastate along with it. What is the brand of the dryer?

Jan 04, 2009 | Dryers

1 Answer

How to change dryer belt on Asko 7305 dryer

You have to pull the back off the dryer.Then you,ll be able to see how it comes off.Ussally its on two pulleys similar to a car.There may be a tensioner on it to to keep it from slipping.If there is one you,ll have to losen it to remove the belt & replace it,then tighten the tensioner back up.Ussally you keep about a 1/4" to 1/2" free play on the belt.You use a sraight edge on the two pulleys to measure it with the belt on,tighten belt tensioner till you have the recommended tighteness.

Nov 05, 2007 | Hotpoint NBXR463EBWW Electric Dryer

Not finding what you are looking for?
Hotpoint NBXR463EBWW Electric Dryer Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dryers Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

shaun taylor

Level 3 Expert

1525 Answers

Are you a Hotpoint Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides