WHEN FIRST PLUGED IN, STAND BY LIGHT COMES ON. wITH REMOTE UNIT TURNS ON AND FUNCTIONS WORK DVD,FM RADIO-BUTHERE IS NO DISPLAY TO VIEW STATION OR WHAT FUNCTIN IS IN USE. ONCE TURNED OFF BY REMOTE, THE UNIT MUST BE UN-PLUGED AND PLUGED IN AGAIN TO ACTIVATE THE STANDBY LIGHT. IS THERE A FIX?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
I had this issue as well. I noticed that there was a sound each time that I tried to turn on the system after plugging it in. The sound seemed to be coming from the disc tray, so I opened the casing and unscrewed the disc tray as well. I fiddled with it until I could get the long lost DVD out of it. ( Family Guy, volume nine, disc 1). I put everything back together and voila! It works again!
Which One For All remote do you have? The manuals and code lists for most are available here: http://www.oneforall.com/support/manual . Use the drop down menus to select Universal Remote Control and then the specific remote model. Then click on the link to the manual.
You may need to program the amplifier and the dvd player separately. The codes below are for the URC-9960. RCA Audio Amplifier codes: 1023, 1254, 0531, 1390, 1609 RCA DVD Player codes: 0522, 0571, 0717, 0822
Please note that universal remote controls only have codes for devices released 6 months or more before the remote was programmed. If your Home Theater System is newer than your One For All remote, you may need a newer remote.
I could only get surround sound for DVD, NOT cable/TV--regular audio jacks only give stereo for cable/tv, NOT surround sound. Very disappointing. Any thoughts/solutions for how to get surround sound? Cable box has digital output, but no input on the rtd 315, any help available? THX