I'm looking for a repair center for pneumatic

www.fixya.com/support/t26761533-get_o_ring_kit_model_68068_framing

Oct 5, 2017 - To do this use two flathead screwdrivers on opposite sides and gently pry the cylinderout being carefully not to damage anything. If you have to ... i need the discharge ring for a central pneumatic 28 ...
11 answers
Oct 5, 2017
SOLVED: Central pneumatic 28 degree framing ...
11 answers
Oct 4, 2017
SOLVED: Where can i get rebuild kit for central ...
11 answers
Sep 26, 2014
Need Parts for Central Pneumatic Air Framing ...
11 answers
Sep 28, 2012
More results from www.fixya.com

Harbor freight does not sell parts for their nailers, however, parts for other nailers may work. Take your nailer to repair center and ask them to try matching parts. The orings are more or less universal and can be matched easily.

Parts for Central Pneumatic nailers are usually available from HarborFreight.com. Go the their web site and find your nailer. At the bottom of the page for any nailer on their web site, you will find a link for parts sheet, then call the 800 number provided. If you cant find you nailer on their listings, it may have been discontinued. Call the their 800 number anyway to find parts. Good luck

Parts for central pneumatic guns are /should be available from Harbor Freight.com. Call their 800 number for information. If no joy, take your parts to Dewalt service center to try to match parts with Porter Cable framer. Porter cable parts are very close match to your gun. Good luck

Could not find parts listing for your nailer. It must be an old number from Harbor Freight. Thier nailers however are China copies or popular brands. Take the part that you need to a fastener company that deals in popular brands of nailers and with measureing tool in hand, ask them to try to match. I have had luck with some porter cable parts fitting central guns. Look here:
www.toolpartsdirect.com

find a porter cable fr350 nailer parts list or bostitch n80. It they look similar then parts for porter cable are sold thru Dewalt service center (for actually looking and measuring the part) .

Central Pneumatic is a Harbor Freight brand, if parts are available for that item it would be though them. http://www.harborfreight.com/contact-customer-service Hopefully they can get you what you need. If not unfortunatly that nailer will be a throw-away. If you need to replace this nailer I would recommend spending the extra money and buying a name brand nailer like Porter-Cable or Bostitch, besides both being reputable brands, they offer factory service, parts and rebuild kits for their nailers.

sounds like a bad o ring inside the housing .

I have a Central Pneumatic Frame Nailer the driver will go down but not back up unless you disconnet air supply.