Question about Zanussi FS1455W Front Load Washer

1 Answer

Fault on Zanussi FS1455W


i have already posted the problem, but having researched more i now understand that there is a specific fault error:

the 'end' light flashes and beeps 3 times and then continuously repeats flashing and beeping. please help

thank you

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Why should i tell you how i solved the problem????? you want money off of me to tell me how to solver it, so shove off

Posted on Aug 29, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to reset zanussi jetsystem programme function board with error E40

E40 is a door lock fault code, you need to replace the door lock,
you cannot reset the fault code, this happens automatically when the fault is rectified. nice easy job though.

Sep 30, 2016 | Zanussi Washing Machines

1 Answer

Power light blinks 5 times. It only displays half of the screen

Hi Mark,
the fault sounds like a t-con board fault, your 5 blink error code means little without the Brand and Model all manufacturer fault codes are different, post your TV Model and Brand for more specific help :o)

Feb 14, 2016 | Televison & Video

1 Answer

What dose F3 code mean

Amana Appliance Fault Codes - PartSelect
Fault codes for Amana ovens, range, stoves including dual convection wall overs and 'big ovens'. ... F3-1 - Oven Temperature Sensor/Circuit Failure - Check wire connections and ... what does it mean when the oven turns off and f3 shows ... My Amanaagds902ww gas range flashes "Door" when attempting to light the oven.

Amana Gas oven Fault Code F3 - Appliance Repair Forum

Nov 17, 2010 - 2 posts - ‎1 author
Have a Fault Code F3 display on oven when trying to set oven ON. Researched ... Yes, your F3 code would indicate a sensor circuit problem, Jenn-Air Electric Range Code F3
4 posts
Mar 15, 2011
Range keeps giving error codes E0/F3 and E4/F3 and the ...
5 posts
Nov 22, 2010
Replaced Sensor Still Getting F3 Error
4 posts
Sep 20, 2008
F3 Error code on whirlpool Range
4 posts
Sep 10, 2007
More results from

Amana Fault Codes - Appliance Help O

Dec 25, 2015 | Amana Kitchen Ranges

1 Answer

Zanussi zde47100w what else can a e62 error be

E62, is a faulty heater unit, faulty wiring or faulty main control board. You have already changed the heater unit so check all wiring. If OK, then you will probably be looking at a new control board.

Apr 08, 2015 | Washing Machines

1 Answer

I have a zanussi jet stream iz16s washing machine in a rented house we own. Then tentants rang me this morning to say when they put on a wash it stops once the wash is on and error comes up on it

Hi Amanda:
We will try to help with this problem, keeping in mind that many modern washing machines display error codes if they detect a fault. These error codes are meant for engineers and often they indicate just an area to check or implicate several possible parts. If the error code is relating to something like an out of balanced load or problems taking in water or a problem emptying water then the error code will be explained in the users or instructional guide.

We can understand that your Zanussi machine stops shortly after starting? If this is right, thermostats, heater elements, drain pumps, water inlet valves, programers and fan motors are the kind of things that can cause this problem. Having this fault put right is normally the cheapest option.

If this previous afirmation that we send it to you isn't right, try to note this error code or code number to send you additional details to solve it or parts replacement (if its necessary).

I hope this information provided initially, allows you to begin to diagnose the problem, if so, feel free to contact us again. Also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this previous answer.

Nov 22, 2011 | Zanussi Washing Machines

1 Answer

Our Zanussi FS1455W ocassionally stops with 'End' light lit and 'Door' light lit, washes OK but does not drain/spin. All lights flash at this point. When we turn control knob to spin it...

Hi from retired Englishman in SW France,
I suspect there is likely to be a problem with either the door solenoid/lock or the 'door closed' sensor requiring a service engineer's attention I suggest ;-0(

If this has assisted and/or clarified the situation for you please consider a 4 thumbs up on our rating.
Thanks and good luck!
John C

Jul 04, 2011 | Zanussi FS1455W Front Load Washer

4 Answers

Simpson ezi loader washing machine clicks 3 times then the end button lights up without even starting the cycle. does anyone have a solution for this?Solve this problem 1 2 3 4 5 6 7 This is a... Solution...

It sounds like a door switch fault see if the end light and the start/pause light are flashing count the flashes if end flashes 4 times and the start/pause once or maybe more this could be error 41, door switch fault.A door switch would cost about $ 20 but there may still be a problem with the main Programmer.
Good luck.

Apr 27, 2010 | Zanussi FS1455W Front Load Washer

1 Answer

The door lock is clicking on and off and the washing machine has difficulty starting I think it is an electrical fault as I have to keep pressing the start button until it clicks on

You have a fault in either the electronic lock control, or in the main board on the front of the machine. Is it under warranty? Your best bet with these front-loaders, is to leave these repairs to technicians! These monsters are EXPENSIVE to repair, and if you're inexperienced, you could create further damage if you try to move parts the wrong way.

Dec 14, 2009 | Zanussi FS1455W Front Load Washer

1 Answer


hi there e40 fault could either be your door interlock or main pcb

Dec 11, 2007 | Zanussi FJS1225W Front Load Washer

1 Answer

Smelly Washer

dont't use liquid detergent - this is the cause of the smell. it is a well known problem. use powder in the drawer

May 13, 2007 | Zanussi FS1455W Front Load Washer

Not finding what you are looking for?
Zanussi FS1455W Front Load Washer Logo

544 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

shaun taylor

Level 3 Expert

1527 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides