Question about Linksys Business Series WAP4400N Pre-802.11n Wireless Access Point

1 Answer

WAP4400N suing TMobile UMA connectivity with BlackBerry Curves

Out TMobile Blackberrys use a service called UMA to connect over wireless ethernet. I use a wrtg54 at home and 2 WAP4400n's at the office. home works fine. Always. Phone switches over and works between Edge and UMA Networks. But at work, where multiple people access using the same service, we work for a few days, then, suddenly all UMA stops...Only UMA. All other functionality of the WAP's work fine. UMA will only reestablish AFTER rebooting the WAP4400N's...Anybody have insight as to why???

Posted by on

  • btgunther Aug 28, 2008

    title of the article should have the word 'using' not 'suing'...lol...my bad.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found the firmware version on the WAP4400n needs to be upgraded to at least 1.2.14. 1.2.17 is also available but I don't think it will anything more for you the .14.

Posted on May 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to resolve wifi access mode not supported


an AP is used to extend you wireless range and will connect to your router to provide network and internet access. An AP by itself cannot connect to the ISP since it does not use a WAN port

a router is an AP that will allow you to connect to your ISP for internet connection. A router can be configured to work as an AP but a AP cannot function as a router.

Feb 19, 2014 | Linksys Business Series WAP4400N...

1 Answer

Hi all, I can not acces the web based setup of Linksys WAP4400N. please help me?


Hi lienekekuste,

If you want to access the Router Settings Page of your Linksys WAP4400N just open a Browser then enter 192.168.1.245 and the Default Username is admin and the Password is admin

Rate me if this helps so I can help others.

Thanks for using Fixya.

Feb 04, 2011 | Linksys Business Series WAP4400N...

1 Answer

I would like to set up secrity on a WAP4400N


To secure your wireless network from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

May 17, 2010 | Linksys Business Series WAP4400N...

1 Answer

My laptop says connected to Linsys router but no internet connection, yet the desktop is connecting to internet


saya ada dua access point, yang digedung A saya memakai access point linksys WAP4400N dan di gedung B saya memakai access point linksys WAP54G. sekarang sudah tehubung masing2 access point, permasalahannya sekarang adalah kalau memakai laptop tidak bisa connect secara automatis, tp kalau secara manual atau memakai IP Address baru bisa connect, tolong gimana solusinya....

Nov 02, 2009 | Linksys Wireless-G WAP54G 802.11g/b...

1 Answer

Systems cant ping each other


can u ping ur gateway? and the router too? then make sure all the system workgroup have the same name. use the same IP for all that is automatic use automatic for all, and if manual setting use manual setting for all.

Jun 17, 2009 | Linksys Business Series WAP4400N...

1 Answer

Can i connect a 2wire 2701hg-b with roadrunner cable internet ? I had the 2wire dsl with at&t but recently disconnected the service


It is possible but it may not work as a router (2 wire 270). The 2wired router only has a phone port and ethernet/usb for computer connection. So if you will connect the roadrunner modem to the 2wired, you can connect it to the ethernet port of the 2wire, but the 2 wire will not function as a router any more. It will work just like a wireless bridge. This one setup that you can.

May 02, 2008 | 2wire Wireless-G 802.11g ADSL Gateway

1 Answer

WAP4400N access


Hello,

Do you have a DHCP server, like on your router, or on another computer on your LAN ?

If you don't know if you have a dhcp server or not... in windows, you can go to: Start>run>cmd, then type: ipconfig /all
That will tell you what ip address your dhcp server is.

If so do you see the access point trying to get an address? Check your logs, if you have a DHCP server chances are the access point (AP) already has an address.

Another thing you can do, is hold... i think it is a red button in the back, if you hold it for 30 seconds i think.. it will reset your AP back to its default settings.

Jan 11, 2008 | Linksys Business Series WAP4400N...

1 Answer

Can't get it to talk to my LAN in ad hoc mode


Is the AP connected to the router using a ethernet cable? Are you having similar issues when you connect wirelessly to the wireless router?

Feb 11, 2007 | D-Link AirPro DWL-810+ 802.11b...

Not finding what you are looking for?
Linksys Business Series WAP4400N Pre-802.11n Wireless Access Point Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Wireless Access Points Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

1869 Answers

Joe Goldman
Joe Goldman

Level 2 Expert

330 Answers

Are you a Linksys Wireless Access Point Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...