Question about Frigidaire Affinity ATF7000E Front Load Washer

1 Answer

E10 code where may I find the service manuel with all the codes and trouble shooting? I have a E10 code on a washer. I fix washer and dryers. Nicole Ortiz

Posted by on

  • ccreed78 May 11, 2010

    where is the pump????

×

1 Answer

I believe E10 means there is a draining problem. Check your drain hose and see if that is where it should be and not clogged. If that is okay, most likely your pump is clogged.

Posted on Sep 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code


The E10 error code indicates the control does not see a proper fill. Here are a few things you can easily check. Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts.

Apr 22, 2012 | Smeg WDI12 Front Load Washer / Dryer

1 Answer

E10 on washer


this is just a general fault code.chance are the door switch needs to be replaced.you can also check to see if there is something clogging the drain pump.

Jan 23, 2010 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

Kenmore front load washer error code E 10 - washer stops and beeps periodically and needs to have start button pushed again to complete cycle. Seems to happen one minute into cycle and then a coupleof...


1 Beep/E10--Error: Water doesn't enter Cause: Water supply problem, Check kinks and faucets
1 Beep/E10--Error: Water leaks Cause: Water connections loose,household drain clog,oversudsing. Correct problems.
1 Beep/E10--Error: Dispenser drawer is open Cause: Washer will not operate if drawer is open.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jan 11, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

I keep getting an E1 Error code on my Whirlpool Duet dryer. Technician came and didn't fix it. Any suggestions?


1 Beep/E10--Error: Water doesn't enter Cause: Water supply problem, Check kinks and faucets
1 Beep/E10--Error: Water leaks Cause: Water connections loose,household drain clog,oversudsing. Correct problems.
1 Beep/E10--Error: Dispenser drawer is open Cause: Washer will not operate if drawer is open.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Aug 15, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool duet dryer-error code e-1?


1 Beep/E10--Error: Water doesn't enter Cause: Water supply problem, Check kinks and faucets
1 Beep/E10--Error: Water leaks Cause: Water connections loose,household drain clog,oversudsing. Correct problems.
1 Beep/E10--Error: Dispenser drawer is open Cause: Washer will not operate if drawer is open.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jul 16, 2009 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

My washer is showing a code


E10 code indicates there is no water supply.This can be confirmed by :
  1. Shut off the faucet to stop water supply to the washer.
  2. Disconnect and pulling the supply hose off the washer to confirm the E10Code
    • Opening the faucet and watch for running water if you have water
  3. Can be caused by bad pressure switch
  4. Can also be caused by clogged pump
  5. also by too low of a drain hose height.
    Check for clean filters of the inlet water line.
    Check that the drain hose was assembled as per the manual's instructions.

May 26, 2009 | Frigidaire ATF6000ES Front Load Washer

4 Answers

E10 code on a zanussi jet system washer


Is it a washer-dryer? E10 relates to a fault with the inlet valve.....usually the valve itself going open circuit.

Feb 26, 2009 | Zanussi WJS1265W Front Load Washer/Dryer

1 Answer

E10 error code


1 beep and E10 is listed as the dispenser door is open. Try reclosing your soap dispenser door tight.

Jan 18, 2009 | Frigidaire GLTF2940E Gallery 3.5 Cu. Ft....

2 Answers

Error code E10 on the electrolux ecovalve EWF1087 front load washer. What does this mean?


E10 is a timeout code. I found the answer on google by refining my search criteria. The tap was not turned on enough for the washer to fill up in time before the timeout was reached. After restarting the washer and turning the tap on further, the washer cycle completed without error.

Jul 22, 2008 | Electrolux Washing Machines

2 Answers

E10 error code


I had this problem, the washer/dryer stopped working while in the drying cycle and displayed e10 message. It was caused by a faulty three-way inlet valve. The solenoid controlling flow to dryer condenser proved to be open circuit. Pulled washer out from under counter top, unplugged, removed top cover, tested solenoid circuits with ohm meter and found one solenoid was faulty. The filter going into the unit was clear. Replaced whole three way component with one ordered on Internet and all now works fine. Noticed that during drying cycle, water to condenser is constantly being switched on and off, explaining why the green condenser solenoid is the one that wears out first.

Mar 03, 2007 | Zanussi WJS1265W Front Load Washer/Dryer

Not finding what you are looking for?
Frigidaire Affinity ATF7000E Front Load Washer Logo

516 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...