Question about Norcent Technologies DP300 DVD Player

1 Answer

Purchased the DP300 at the Goodwill. The DVD has the remote control;however, I do not know how to use the remote control. I used the red, yellow, and white connector to my the DVD player and to the TV but I am unable to get the system to work it takes a while for the DVD player door to open and close. it seems to be working very slow do I need to have the system cleaned?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

With regard to using the remote control :

Make sure the batteries in the remote are working (they go in the back of the remote at the bottom).

Turn on the DVD player with the power button on the DP300 itself (lower left). Open the dvd tray either with the remote (press open/close button, upper right) or with the button on the DP300. Put a DVD in the tray and close it with the remote or the button on the DP300. The DVD should load.

Use the arrow buttons in the centre of the remote to select choices from the onscreen menu of the DVD. Press Play (centre of the 4 arrow buttons) to activate the choice you want. For example, if you want to play a movie, use the arrow buttons to go up or down until "play movie" is selected, then hit PLAY, and movie will play. If you want to choose a scene/chapter of the movie, use arrow buttons to go up or down until Scene Selection or Chapter is selected (highlighted), and press PLAY. This should bring up a list of the scenes or chapters. Use the arrow buttons to select the one you want, then hit PLAY, and that scene should play.

If the DVD tray is taking less than 20 seconds to operate, there is likely no problem. If it is taking more, there may be. I think the mechanism that opens and closes the tray is often the first thing to stop working on DVD and CD players.

Posted on Jul 29, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need codes of a norcent DP300 DVD player for an innovage universal remote


0039,0033,0030.
Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

Aug 18, 2014 | Televison & Video

Tip

Remote Control Problems


hi, BEARHOUSE IS HERE WITH THE Answer i Purchased a Memorex MVD2022 DVD Player at a Goodwill Store For $7.00 Dollars. I Had a Coby Model# 224 with Remote Control My Coby Quit Working the motor Drags. I had Both DVD Players on top of Each Other Tried The Remote For The Coby and The Memorex DVD Player Blinked. So I Cut off The Coby And What Did Find I Found that the Coby Remote Worked on the Memorex The Buttons Are Different But Works Good Enough For Me.

The Setup Button Eject the Disc and the >> fast Forward Button Turns it on and off
and the Program Button works For Sub Title other Buttons have other functions for The Memorex MVD 2022 Only thing You Have to work the sound From Surround System are TV.

on Feb 23, 2008 | Memorex MVD2022 DVD Player

1 Answer

How to play a dvd on the samsong? don't know how to connect the red yellow and white wirews?


You just have to match the color of the plug to the color connector on the TV and on the DVD.
Look for something like AV1, or Video 1 on the TV. It should have Yellow jack for the Video, and RED and WHITE jack for the Audio Right and Left channels, same thing applied to the jacks on the DVD player.
The just select AV1 using the remote control, just look for 'INPUT', or 'SOURCE' bottun on the remote.

Oct 12, 2011 | Samsung Televison & Video

1 Answer

The remote has stopped working for my DP 300 DVD player. I changed the batteries, and I have operated another remote successfully with the new batteries, so it is not the batteries


Try to check the battery terminal the one that is connected into the pcb it might be loosed. sometimes the lead that holds the battery terminal is not properly connected. or try to check the led sensor the one that looks like a bulb, in order to check it you must have a cellphone with a camera then point the sensor into your camera lens then press any button you will see in your cellphone monitor that there is a red light glowing that indicates that the remote is in good condition.

Jul 09, 2011 | Norcent Technologies DP300 DVD Player

1 Answer

I need a remote control and i need to know how to hook my cyberhome to a tv. Its a use one


you need to purchase cable wire (yellow/red & white) at least 3 feet..yellow is video red & white is audio...plug into the color jacks on tv...the remote is kind of hard this dvd model is discontinued....

May 19, 2010 | Cyberhome CH-DVD 300 DVD Player

1 Answer

Remote control


that is a Sony set any universal remote should be able to program for MOST sets use the search feature and it will be a lot easier to do it with that function.
techman

May 08, 2010 | Sony KV-20VM30 20 in. Combo

1 Answer

Inherited a flat screen tv without remote. cannot search for channels. dvd player is black and white with red, yellow, white cables. ugh.


You need to invest in a univeral controller. You can either order one onlne or go to a local store and purchase one. The controller instructions will give you the correct codes to access your TV controls. I don't understand your comment about black and white on the DVD player. Are you having problems hooking up the DVD to the TV? Most problems will be cleared up after you get a remote. If you need a user manual for the TV let me know the model number and we can find the correct source. Thanks.

Jan 02, 2010 | Philips Televison & Video

2 Answers

Samsung CXD2512 TV/VCR Combo...Cannot hook up DVD player


We also don't have a remote. We hooked a DVD/VCR combo to the Samsung combo by attaching the cable from the cable line to the DVD player and an additional cable from DVD to TV and it used to work but after we lost the control, the DVD can only be listened to but not seen. The VHS from the DVD player works perfectly though.

When we had the remote (before connecting the other combo) we used line-in to see a DVD or VHS using the yellow red and white cables from the Samsung to the other player.

Sep 05, 2007 | Samsung CXD2512 25 in. Combo

1 Answer

Dead player revived with cheap part


Well Good for you Gene!! As the last post I answered for ya, Its not always a laser assy thats bad. And its a good Idea to stick to the low voltage repairs unless you know about the safty issues on what to and not to touch . Good Luck

Jun 20, 2006 | Norcent Technologies DP300 DVD Player

Not finding what you are looking for?
Norcent Technologies DP300 DVD Player Logo

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Norcent Technologies Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76115 Answers

Audrey Messer
Audrey Messer

Level 2 Expert

182 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you a Norcent Technologies Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...