Question about Panasonic BL-C1 Network Camera

1 Answer

No picture when using IP address on Internet Explorer

HI THERE, I have just purchased a BL-C1 and installed the software. I can access the camera using the recording software, but if I just key in the IP Address on Internet Explorer I just get a page with "Panasonic Network Camera" - but no picture. I assume you do not need the recording software to view on IE, only ActiveX loaded (which I have got). When I key in the IP address I am prompted for user and password which tells me I am getting through, except I don't get a camera picture. Any ideas?

Posted by on

  • Anonymous Feb 09, 2009

    I have the same problem, no picture have installed activex, wasted hours but still no picture, any ideas to pancamerror@as-ltd.com

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 115 Answers

After you log in their should be a config screen.

Suppert can be found in Panasonics FTP server.
1000's of apps and manual for this camera and more.

ftp://ftp.panasonic.com/pub/Panasonic/cctv/downloads/

Posted on May 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic survelliance cameras - Need to reset


HOWTO: Factory Reset your Panasonic BL-C1/20

www.networkwebcams.co.uk/.../howto-factory-reset-your-panasonic-bl-...
Dec 12, 2007 - Howto guide for resetting Panasonic BL-C1 and BL-C20 back to factory ... CCTV camera icon ... Panasonic BL-C20 Factory Reset Aperture ...

[PDF]Operating Instructions - Panasonic

ftp://ftp.panasonic.com/.../Panasonic/.../security/.../WV-NF284...

Panasonic5. Preface. The network camera WV-NF284 is designed to operate using a PC on a network (10BASE- ... This function detects a motion in a designated surveillance area and issue an alarm signal is ..... Use this button to reset the settings of.

Quick Reference Guide for BL-C230 - Panasonic


Dec 05, 2015 | Panasonic BB-HCM311A Network Camera

1 Answer

How to configure the UPNP in panasonic camera?If we need access from the internet should we register in viewnet.com?


To access your camera from the Internet you will need to configure uPnP (or configure port forwarding manually) and register with some kind of dns service like viewnetcam (or know your home's external IP address assigned by your Internet Service Provider).

1. To configure uPnP on your camera, look in the network settings for an automatic network configuration option - this will trigger the camera to talk to your router using uPnP to set up port forwarding. The default for one camera is to use port 80 for the outside port and something like 192.168.1.253 for the internal network address (internal to your home only). uPnP will try to configure the second and third cameras to external ports 50000 or 50001. My router failed to configure the 3rd camera so I had to manually add a port forwarding option from my router's admin pages. To note, you can configure all port forwarding manually from within the router admin pages. Just list the internal network address to your camera (like 192.168.2.253) and specify a different port for each camera (like 50000 to 50000). You can then access your camera by typing in 192.168.2.253:5000

2. Then, you should register with viewnetcam.com. Adding your cameras on viewnetcam will give you access to them from outside your house without you having to know the IP address to your home network. You will simply type in your viewnetcam url with ":" and the port number (like username.viewnetcam.com:50000).

Note: When trying to access your camera from outside your home (or even pinging your router from outside your home), you need to know the IP address of your home. This is assigned by your Internet Service Provided and can change every time you reboot your modem. Services like viewnetcam keep track of the IP address to your home and update it automatically when it changes (your camera will communicate with Viewnetcam servers occasionally to update the IP address). All you have to remember is one constant URL (the viewnetcam url) and you can get to your cameras!

Aug 14, 2010 | Panasonic BL-C131 Network Camera

1 Answer

I can't get into ip address 192.168.1.1 I seem


Sometimes these IP address 192.168.1.1 when you type it in the address bar don't work in internet browser like mozilla firefox and ggogle chrome.

If you are using windows xp... use the "e explorer" (internet explorer) as your browser
On the address bar type 192.168.1.1
There you can access the configuration of your router.

May 19, 2010 | Computers & Internet

1 Answer

How to communiocate with IP camera


first you try to ping the ip address of the camera.if you getting the replay that means it is working if it not then you have to chek ur lan setting.

Jan 14, 2010 | Panasonic BL-C1 Network Camera

1 Answer

Problem with comp


yes u can disconnect the ethernet port to pc.or check wther it is connected via wifi

Jul 06, 2009 | Panasonic BL-C1 Network Camera

1 Answer

Need BL-C30 installation exe file.pls hlp


Thank you for contacting Panasonic. We apologize for the delay in our response.

The CD can obtained through our parts department at 1-800-332-5368 or through the link below:

http://www.pasc.panasonic.com/epartr/

It can also be downloaded at http://netcamdealer.com/resources/file/82/103

The CD-ROM is not needed for setup. To setup the camera, type in the local IP address of the camera. If you do not know the IP address of the camera, press the reset button on the back of the camera to reset the IP address. This will default the IP address to http://192.168.XXX.253, with the XXX being replaced by the 3rd octet of your router IP address. For example, if your router IP address is 192.168.0.1, you will type
http://192.168.0.253 into your internet browser and you will be able to configure the camera. Another example is if your router IP address is 192.168.1.1, you will type http://192.168.1.253 into your internet browser and you will be able to configure the camera.

To obtain additional assistance for your product, please contact our Panasonic Customer Call Center at 800-272-7033. The hours of operation are Mon. - Fri. 9A.M to 9PM and Sat. - Sun. 10A.M to 7PM Eastern Standard Time. A representative will be available to assist you. Please have your case number 26813996 available at the time of the call.

Thank You,
Panasonic Consumer Support

Apr 13, 2009 | Panasonic BL-C30A Network Camera

1 Answer

Unable to access internet through local area network.


hello
in this case first you need to check the ip address by goin on start- run - type cmd -- then type ipconfig , if its giving you a valid ip address then try to access internet and select the option that says automatically detect settings and you will find that option under -- open internet explorer then go to tools- internet option- connections - lan settings
and
if you are not getting any ip address then do a right click on my compuetr icon on your desktop adn go to properties-- hardware- device manager-- network adaptors - and uninstall all the adaptors and then do a right click on network adaptors and then scan for hardware changes .

and the third option is to uninstall Internet explorer 8 adn try with IE 6

kindly rate this solution as well

Mar 24, 2009 | Microsoft Internet Explorer 8

1 Answer

Internet Exporer


"Obtain ip address automatically" indicates that it will use DHCP. DHCP will also provide the Internet Gateway address, which is required to access anything outside your local subnet (like the internet). You can set your IP address manually, but you also have to enter the Internet Gateway and DNS server addresses ( and you have to know what those addresses should be for your pc ).

Feb 17, 2008 | Computers & Internet

1 Answer

Problems in connecting to my blc30a through the website viewnetcam.com


Are you trying to access the camera in the local network? Have you assigned a static ip address to the camera? Which router are we using?

Feb 27, 2007 | Panasonic BL-C30A Network Camera

Not finding what you are looking for?
Panasonic BL-C1 Network Camera Logo

944 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

micky dee

Level 3 Expert

2642 Answers

Are you a Panasonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...