Question about Sharp LC-26D43U Television
I'm trying to hook the TV screen up to a Dell computer and am having no luck. When the computer starts up, it shows the DELL screen and the Windows screen, but before it gets to the login menu, the screen goes black and then says "No Input"
What should I do?
I have tried setting the resolution to 800x600 and 1024x768 to no avail!
I see your post is about 6 months old, but I was having the same problem. After reading through forums for about an hour, I noticed that resolution was a common factor. I decided to take a shot and crank the res down to the lowest setting (800x600) using the 17" lcd that had already been working with the comp. I then unplugged the lcd and plugged in my tv and voila, I got a display. I then went into display properties and adjusted the res to the highest my tv would take (1280x768). You may just be trying to use a res. that your tv cannot accept. Hope this helps.
Posted on Dec 16, 2008
I am having exactly the same issue. I also had a similar issue witht a 17" Dell LCD monitor (minus the 'no input'). I was able to resolve that by loading the video drivers from the Dell site. It makes me think that we need a Sharp video driver but I have not been able to find any.
Posted on Nov 13, 2008
Tips for a great answer:
Sep 29, 2013 | Sharp Aquos LC-46D62U 46 in. LCD HDTV
Oct 28, 2012 | Flat Panel Televisions
May 02, 2012 | Sharp LC-26D43U Television
Aug 19, 2011 | Sharp LC-26D43U Television
Jan 07, 2010 | Sharp Aquos LC-30HV4U 30 in. LCD HDTV
Sep 30, 2009 | Sharp Flat Panel Televisions
May 15, 2009 | Sharp LC-52D62U 52 in. LCD HDTV
Jan 04, 2009 | Sharp LC-32GA5U/LC-32GA5E 32 in. HD-Ready...
Dec 06, 2008 | Sharp Aquos LC-42D62U 42 in. LCD HDTV
Oct 18, 2010 | Sharp LC-26D43U Television
560 people viewed this question
Usually answered in minutes!