Need to pack it up

Give this a try.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00386753&cc=us&lc=en&dlc=en&product=443024

Here's a link to the drivers for your Photosmart 7550 at the HP site. Choose the driver for your operating system and download...

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=72891&lc=en&cc=us&dlc=en&lang=en&cc=us&submit=Go%20»

Assuming this is a Photosmart 7550 printer and not the 7550 Plotter, this is what you will need for connectivity. To connect printer to PC, you will need a standard USB A/B cable... one side is a male A connector and the other one a male B connector. As far as the drivers are concerned, you will not need to download any. Vista already has a compatible driver for your HP Photosmart 7550. HP recommends selecting the drivers for the Deskjet 5550 when installing your Photosmart 7550.

HP Photosmart 7550 Printer: Manuals http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&product=72891&lang=en

print cartrigeis cradle is stuck clear jam then press ok in hp photosmart 7550.

Here is a link to HP support:

7550 Ink Replacement

Normal 0 I suggest you get a sheet of Card Stock (Heavy paper) and place it in the feed way. Then press the print button applying a slight amount of pressure on the Card Stock so it will feed through the printer. The reason for this, is in some cases I have been able to clear the paper track of debris that was deposited there over time.
Worth a try, as I have fixed a number of printers this way, saving costly repairs.
Hope this helps. Bud

Go here to download the driver. you should beadle to get it installed right here.

http://h10025.www1.hp.com/ewfrf/wc/product?product=3418705&lc=en&cc=us&dlc=en&submit.y=11&submit.x=4&lang=en&cc=us&y=2&x=7

Good Luck and Please Rate FixYa!

I just purchased new hp cartidges and I still get error massage cartidge #57 needs to be replaced.

The line on the printing at the end or far right of the sentence (like the last 3 or 4 words are faded)

this is for hp 7550 photosmart

Careful 'knocking up' and 'riffling' the sheets before placing in the feed tray will go a long way to to alleviate this one. Getting air between the sheets is the object of the exercise . The cutting packing and wrapping of sheets compresses them. Did you know also that there is a right side and wrong side to copy paper? Look at the side or end of a new pack for the arrow.