Ive lost the code to my kenwood KRC-597 car stereo. is there a generic code that i can use?

here is

radio shack is a good place to check.

You will have to either find those papers or contact Kenwood, as these are your only two options my friend

Yes you do need it definitely

You didn't write them down, or remember 4 numbers that mean something to you. And now the receiver won't operate with out the correct security code. If you can't remember you need to have a Kenwood Service Tech reset the code. He'll be glad to do it for you.

Here is the owners manual:

"http://www.payloadz.com/go/sip?id=889718"

You can send it off to a company on ebay who will de-activate the code for the stereo.

if you dont have it with the radio or wrote it down anywhere, your going to have to call kenwood tech services and give them your serial number on the radio and then they will walk you through resetting the code for this.

can you please find a cod for keenmood krc-585/m3
thank you

If there was no spark and wires hooked up wrong in the first place, your player should work if you find the PWR lead and the Remote lead and ground. Then speaker wires +) and (-