Question about Timex Digital Expedition watch

3 Answers

Timex Expedition alarm beep

Greetings, I changed out the battery on my expedition and all is well, except the alarm will not sound any more.  I have set the beep to be 'on', and the watch does go into alarm at the set time because I see the indiglo light up and the face flashes.  However, no beep sound.  Any solutions?

Posted by on

  • Anonymous Nov 23, 2008

    same issue here. Reset the back to make sure it was in the right position and still no sound with anything. I also see the flashing light when timer or alarm goes off.

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 111 Answers

Good after noon ! maybe the problem of your watch is wrong possition of case back because the speaker or buzzer of your watch is attached on the case back , so open the watch and fix the case back at the correct possition ,!thank you ! god bless !.....

Posted on Aug 29, 2008

  • Chris Oct 03, 2011

    Thanks for the posting. I wasted couple of hours fiddling with various buttons and searching Google for how to get the alarm to beep again. Your posting saved the day.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem with mine. I took off the back plate and turned it 180 degrees so the "E" on the back plate is now right-side up when the watch is turned over. The alarm sounded on all 3 alarms. I tested the solution by putting it back on upside-down and the watch's alarm once again did not sound. Then I repeated the fix with the "E" right-side up and the alarm sounded again.

Posted on Sep 19, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Also recover the re-cover the battery to keep it from touch the back plate. use the sticky part of a post it note

Posted on May 15, 2012

  • michael May 15, 2012

    also re-cover the battery to keep it from touching the back plate. use the sticky part of a post it note

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No sound after battery replacement


IS THE BACK ON THE RIGHT WAY THE WRITING SHOULD BE FACING LEFT TO RIGHT AND START FROM 12 O'CLOCK DOWN

Jul 20, 2010 | Timex Expedition 40141 Wristwatch

1 Answer

Can't turn off the alarm on a timex Expedition Watch


buy a Casio wrist watch at KMart for around $17.00. They last five years, then the
band breaks and you buy a new watch. I timed the traffic signal system of our city for 20 years from a Casio wrist watch. Now in retirement, I have a Time Expedition which has several alarms which I do not need, and can't turn off. We change the time twice annually, so having alarms and chimes go off without warning ca bve a nuisance.I found some instructions on a website which shows how to turn the alarms off.

Jun 02, 2010 | Timex T41091 Expedition Watch

3 Answers

Lost the beep on my timex watch alarm


Try taking the back off and orientating it the other way (i.e. turn top for bottom). You don't have to screw it down to see if this will work. As soon as the back clicks in you will be able to hear beeps as you press the buttons

Mar 18, 2010 | Timex Expedition C45981 watch

1 Answer

I recently had my battery changed on a timex expedition adventure tech altimeter watch, now the chime doesn't work and the alarm doesn't beep. Please help. Thank you.


You can attempt to have the circuit board reset if it has an "AC". This may or may not fix the problem. Usually when a sound board goes out you have to replace the whole circuit board or movement.

Sep 14, 2009 | Timex Expedition Adventure Tech Altimeter...

1 Answer

Adventure tech doesn't have chime


could be following reason
1, you did not put case back correctly,
2, small spring which connect watch movement from caseback for chime lost during battery change ,
3, may be required reset of AC & Battery plus ,, by twizer
hope this help

From:
AmFix Jewelry & Watch Repair
203 N. LaSalle st
Chicago, IL 60601
Ph: 312 641 7000
email: info@goamfix.com
web: www.goamfix.com

Sep 14, 2009 | Timex Expedition Adventure Tech Compass...

1 Answer

No beep, no alarm, no sound at all after battery replacement and after resetting the watch. The watch is the Expedition.


I think you put case back wrong way ,, or a small spring which connect caseback with watch movement feil during battery change that also ma be a issue.
From
AmFix Jewelry & Watch Repair
203 N. LaSalle St
Chicago, IL 60601
Ph: 312 641 7000
Email: info@goamfix.com
Web: www.goamfix.com

Sep 14, 2009 | Timex Digital Expedition watch

2 Answers

Timex Expedition watch beeping continuously please solve


Try to get solution here:

http://www.timex.com/gp/node/n/255235011/190-2521384-6105829?ie=UTF8&timexBrand=core

Rate, please.

Jul 18, 2009 | Timex Expedition 84601 Wristwatch

1 Answer

Timex Men's Digital Expedition Chrono Alarm Timer Watch battery


hi
please follow the steps to change the battery
  1. Step 1 Make sure the little arrow on the back is aimed to the right. Then, insert a small flat head screwdriver into the notch on the edge, and lever the back open. Place the back to one side.
  2. Step 2 Unscrew the clip holding the battery (if your model has a clip), and remove the battery.
  3. Step 3 Use plastic tweezers to put in a new battery. Do not directly touch the new battery. Screw the clip (if it has one) back on.
  4. Step 4 Replace the gasket that seals the watch. Then lightly coat the gasket with a silicone-based grease.
  5. Step 5 Align the back with the little arrow aimed to the right again, then carefully press the watch between two pieces of wood that are being held by a small vise, until the back seats itself.
thank you....

Apr 08, 2009 | Timex T41091 Expedition Watch

2 Answers

New Battery but Alarm sound doesn't work


You will find an arrow head on the outside back of your watch where all the printing is. When you put this lid back on, this arrow needs to be aligned with a notch on the inside edge where the cover goes on. As you are looking at the watch from the back with the cover off this notch is in a northwesterly direction. If you doubt it then just hold the back on without popping it in all the way and hit your mode button to make sure that you hear the beeps again. If you do, then you've found the right spot.

Mar 16, 2009 | Timex Expedition 84601 Wristwatch

6 Answers

TIMEX MODEL MF13/P8


Press all the four buttons simultaneously your digital clock gets resetted. It worked for me try it out.

Jul 21, 2008 | Timex Expedition 84601 Wristwatch

Not finding what you are looking for?
Timex Digital Expedition watch Logo

1,187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Timex Watches Experts

Ross Keen

Level 3 Expert

1138 Answers

freddyfox

Level 2 Expert

236 Answers

Pieter Vleeshouwers

Level 3 Expert

1410 Answers

Are you a Timex Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...