Damaged by water loging unable to start - Audio Players & Recorders

You can return the router to its factory settings. the end of a paper clip or a similar object to press and hold the Reset button on the back of the router for at least 7 seconds. See Manual

http://www.downloads.netgear.com/files/GDC/R6300/R6300_UM_1Jun12.pdf

i can't loging facebook

There might be some faulty in earpiece section.I think that you cannot repair it by yourself.Sometimes this problem occur when we loged the phone to water or using in high humidity.The best way to solve this problem is to contact mobile repairing shop.Thanks for visiting fixya

try safe mode by pressing F8
or reinstall windows xp

if you know where your valet switch is try to turn the ignition on and press the switch 1 time within 10sec and that should disable your security system for now. then to program the remote you turn the ignition on and press the switch once and hold a second time, within a few seconds the siren will beep once then press the lock button on the transmitter and the siren should beep again then let go of the switch and turn key off. If no beep is heard when you push lock then the transmitter is no good

It can be water loged you need to drain some water out of your tank and put 35 psi air in it,

try using a different sim in your set to confirm whether it is a set problem or sim problem. If it is a set problem, restore the factory settings.

Open your web browser and type the IP address of the TEW-450APB in the address bar. The default IP address is 192.168.1.1. At the login, enter your username (admin) and password (admin).

The default IP is 192.168.1.1 and not 192.168.1.100 as you have entered.

shorting out battery