Question about Konica Minolta bizhub 350 All-In-One Laser Printer

1 Answer

Error code on Konica Minolta C350

Anyone know what an error code C-0876 is on a Konica Minolta C350 copier is?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 3 Answers

There is not a C0876 listed in the service manual. Perhaps it's a C0B76 - Finishing option Punch Unit Board Malfunction.
CAUSE: The shaft on which the gear rides is deformed. The punch unit cannot be driven from front to rear.

SOLUTION: Reform the shaft toward the punch unit rail. This will allow the drive gears to mesh properly so the punch unit can be mechanically driven from front to rear.

Posted on Aug 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Konica minolta c350 error code c204


C 204 Tray 2 feeder up/down abnormality.Check the M9 paper feed tray 2 lift up motor connector for proper connection,the PS15 paper feed tray 2 upper limit sensor actuator,the motor coupling.

Jul 27, 2014 | Konica Minolta bizhub Printers & Copiers

1 Answer

Konica minolta c350 error code c-0096


If your copier models is Konica minolta Bizhub C350 reset the error code:
Turn OFF the copier.
Press and keep pressed the Utility key and turn ON.
Keep pressed the Utility key and wait will Trouble reset message displayed.
Release the Utility key and touch the message.
Turn OFF the copier,wait 1 minutes and turn ON.
If the code persist enter in the service mode,select counter,select service call condition and read the trouble code description to lacalizate the truble.
If your copier model is KonicaMinolta Dialta CF3102 or OCE CS 220 the code C0096 refer to Transfer belt separation.

Apr 09, 2013 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Error c-0200


konica minolta bizhub malfunction detected error code c-0200

Sep 01, 2012 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Konica minolta size media error


i have a bizhub C350 and has this error code coming once power ON the error code C-12CC..please if any one has faced the problem i will appreciate your help....

Aug 14, 2012 | Konica Minolta magicolor 2490MF Laser...

1 Answer

How to fix C-0500 error for BIZHUB C350 konica minolta printer


Open the front door with the machine on, get down on the floor and look up on the right side of open area there is a slanted section in that slated section is a small hole you will not see it standing! With a small screwdrive gentle push the small switch located in side the hole that will reset the code if it comes back DO NOT RESET the copier is telling you something is wrong with the FUSER UNIT the HOT part continued reset might catch the machine on fire and that would ruin a perfectly good day. Have a qualified Tech look at it from Konica Minolta.Check this web site out for a rough idea of cost to replace the fuser.

Precision Roller Printer Toner Cartridges Parts and Supplies Office...

Jan 31, 2012 | Minolta Printers & Copiers

1 Answer

Konica Minolta C350 colour copier T096 error code??


Transfer belt code C096 mite try open and closing the front door where you put the toner. Also remove the image transfer belt and then reseat it.

Apr 10, 2009 | Minolta Printers & Copiers

3 Answers

Bizhub C350 Malfunction Code C-0510


I have this malfunction code, C-11A3, coming up on my Konica/Minolta Bizhub 350 copier/printer. Anyone know what it is? I don't use the techs, because they charge much I don't pay for the service anymore-seems like most things should be able to be fixed by the owner. I needed help for this code

Mar 21, 2009 | Konica Minolta bizhub C250 All-In-One...

3 Answers

Konica Minolta Bizhub c350 error code c-0510. What is it? How do I fix it?


C0510 Upper fusing roller abnormally low temp


replace the thermistor in the fuser

Sep 25, 2008 | Printers & Copiers

1 Answer

Copier malfunction


Code C0F36 is a low toner density error on the black developing unit.

Was it asking for black toner before this code appeared?

Feb 10, 2008 | Konica Minolta bizhub C250 All-In-One...

Not finding what you are looking for?
Konica Minolta bizhub 350 All-In-One Laser Printer Logo

545 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...