Question about JVC Audio & Video Receivers

Open Question

JVC stereo receiver CA- MX70BK rattles when on for more than five minutes and will not play records correctly (sounds like the treble has gone crazy.)

Posted by on

4 Suggested Answers

  • 4234 Answers

SOURCE: My JVC stereo receiver :CA-D4T has 3 cd changers and they don't seem to work most of the time

This is an indication that either the lens is dirty or that the optics are failing. Try opening up the unit and cleaning the lens using a cotton swab and alcohol. If that does not resolve the problem, the optics will need to be replaced.

Dan

Posted on Jul 30, 2008

  • 1 Answer

SOURCE: Low volume from Akai turntable attached to Pioneer Surround Sound Receiver

If you receiver doesn't have phono inputs,you will need to buy an inline phono amplifier.Phono inputs have a built in amplifier,all others don't.Try Crutchfield.com.If they don't carry them,they will tell you who does.

Posted on Jan 27, 2009

  • 1 Answer

SOURCE: I have a Kenwood KR-A4010 Am/Fm Stereo Receiver. Every five seconds the sound fades in and out. Can anyone find a solution to this problem?

i have a kenwood kr-a4010 it works no sound in speakers

Posted on Jun 02, 2010

hattonhall
  • 349 Answers

SOURCE: Subwoofer playing in stereo sound

When Stereo was the only "2 channel audio output" available. We never had Sub-Woofers and relied upon Bass and Treble controls to give an overall balance and Bass Depth to suit one's preference.
A Bass Sub-woofer is intrinsically part of a Multi-channel audio system. It is the " .1" part of the 2.1, 5.1, 6.1 sound system/s.
That is why you do not get Woofer Signal and thus output, unless you use more than just "Stereo Audio Amplification".

Posted on Oct 30, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to set the receiver to surround sound. The indicator only shows two speakers I want it to show five


What is the source of your sound? By default, receiver will use only those channels that are used in the input signal - if you play CD in stereto, it will use only 2 front speakers. If you play DVD with 5.1 audio, it will use all 5 speakers (+ subwoofer if you have one).

However you can use one of the bulitin "sound field program" modes to mix the 2 channel stereo music to all speakers. On front panel, press "PROGRAM < >" buttons to select the one you like. Or on remote control, repeately press MOVIE, MUSIC or STEREO buttons. You can check your manual for description of each sound field program.

Oct 11, 2014 | Yamaha RX-V661 Receiver

1 Answer

My Studio Standard by Fisher stereo system's audio keeps breaking up.


Could be a defective volume control. After 20 years, it would not be surprising

Apr 10, 2013 | Fisher Studio Standard Am/fm Synthesizer...

1 Answer

I have a fisher ca-9335 integrated stereo amplifier thats hooked up to sanyo tp 1010 turn table and plays out of yamaha ns-70t speakers. a simple jvc cd player is also hooked up to the speakers but not to...


Something doesn't add up. You mention two connections to the speakers - CA-9335 and a "simple jvc cd player". Is that true? If so, you might want to UNconnect the CD from the speakers and run it into the receiver where it belongs. An amp isn't designed to share the load with another live device; or even have electrical contact with anything BUT speakers.


Did you actually find documentation that supports this hook-up? Or just winging it?

Feb 20, 2011 | Audio & Video Receivers

1 Answer

Unable to set surround sound to work


The media you are playing must have surround sound recorded or encoded on it in order for surround sound to play or occur. Get a DVD or CD that has surround sound stated on the label - otherwise the system defaults to stereo playback.

Oct 31, 2010 | Nakamichi AV-10 Receiver

1 Answer

Bose 901 Active EQ Loop


There's good news and bad news. The bad news is that a multichannel receiver with Bose 901's will only sound right in STEREO on stereo analog material. For one thing, the other speakers around the room are not designed to recieve its Active Equalization and for another, if you engage your Tape Monitor you will not be able to play digital sources. Tape Monitor is for analog stereo material only and on my receiver it disables any digital inputs.

The good news. I have a setup similar to what I think you're trying to do and it works great!

A separate stereo amp for the 901's was my solution. I run a Carver AV-406 (5-channel amp) for my 901's in Front, 2 Subwoofers and the Rear Surround channel, with the Active EQ between the receiver Front L&R Outputs and the 901's amp channels. My receiver controls everything and just drives the Center and Surround speakers. You could get by with just a stereo amp for the 901's. A Carver M-200 is a good efficient amplifier that would have you cooking just fine (2x100W).

Run the dbx and BSR in tandem with each through the tape monitor loop on the receiver but be advised you can only use them on analog source stero material. However, you can still employ the various DSP options to spread the sound around the room.

At my PC workstation across the room I have a stack of analog processors and sources including dbx 3bx-ds, dbx 120x-ds, BSR Spatial Enhancer, BBE 462 Sonic Maximizer, SS-525x EQ, Carver C-9, dbx-224x, JVC cassette deck, Dual 1249 Turntable running through a Garrard MRM-101 Preamp, Pioneer PDR-509 CD Recorder and the Media Center PC stereo analog channels all running through a dbx 400x Program Route Selector (a godsend) which is attached to my ONE TAPE MONITOR on my Pioneer VSX-36TX Receiver. Of course, I have some of my analog processors running in tandem, too, since the 224x only has three processor and three tape loops.

For listening/recording anything 2-channel analog I engage the stack through the Tape Monitor. For everything else I turn the Tape Monitor off. The nice thing about the stack being separate is that I can doodle with recording and use headphones while the TV/DVD/Blu-Ray do something else.

Jan 10, 2009 | Onkyo TX-SR705 Receiver

2 Answers

I have a jvc ca-mxkb25 house stereo which when its turnt on it says on the display overload


i have the jvc ca-mkkb25 3 disk music system how do i get the disk door open when it says locked

Sep 12, 2008 | JVC Audio & Video Receivers

1 Answer

Low treble


I suspect that the speaker levels need to be set. You connected everything right - many people would not have connected the sats via the bass section (which has their high pass crossover and overload protection). But I am betting the HSU is turned up a bit on the high side.

Try this. Set all speakers to small, set all levels to 0. Play the receiver in stereo all mode. If the bass is strong, you need to turn the HSU down closer to a natural sound. Then use the speaker setup tone and adjust as needed.

May 14, 2008 | Onkyo TX-SR304 Receiver

2 Answers

Much loved old J.V.C. unit


Sounds to me like the belt drive is slipping!
Need to open her up and check tightness of belt and probably try to buy another one which will be tighter!

Mar 21, 2008 | Audio & Video Receivers

2 Answers

Subwoofer playing in stereo sound


i think uyou have to got to stereo mode and turn ion the subwoofer option. i have a h/k thats wart i had to do in evvery mode is designate the s/w. rating please

Jan 24, 2008 | Denon AVR-1907 Receiver

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Audio & Video Receivers Experts

 Elex
Elex

Level 2 Expert

49 Answers

Cindy Wells

Level 3 Expert

4759 Answers

Rod
Rod

Level 2 Expert

224 Answers

Are you a JVC Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...