Question about Epson Stylus Photo R200 InkJet Printer

6 Answers

Epson R230 ink & Paper Lamp Blinking

For Every master Printer,

I have epson stylus R230 when i turn it on the ink led and paper led is blinking ,i has to try clean head and every connector for cartridge,try to cleaned waste ink pad make it clear like new one, try to checked every cable connector and i have done to reset my printer, but both of red led still blinking.
Maybe who someone can give solution for my printer, thank you very much.

Posted by on

  • 3 more comments 
  • Anonymous Sep 03, 2008

    Epson R230 ink & Paper Lamp Blinking problem, and notify you when a new solution is offered

  • nujnobah Oct 08, 2008

    both red led lamps are blinking..i've already resetted it..may someone help me to fix this problem.. your answers are highly apprecated..thanks..

  • Anonymous Mar 06, 2009

    when i start the printer led is alternet blinking

  • joselle08 May 21, 2009

    help me,.,.,.,. my epson r230 have the same problem,.,.,. i already installed ssc utility but nothings change it still blink,.,.,.,

    pls,..,.help me,.,.,.

    send me your answer on my email,.,.,.
    josh_kosner@yahoo.com

    thanks the God bless!!!

  • Anonymous Mar 15, 2014

    epson stylus t11 led blinking

×

6 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Could someone show us how to open the r230? im having hard time cleaning the waste ink pad because i cannot open the r230..

Posted on Oct 27, 2008

I have an EPSON STYLUS PHOTO R230 series.. INK and WASTE led were both blinking..i restted it already... but the last one.. i can't reset it anymore.. the printer is indicating and saying "Remove foreign Object in the printer" .. what posible damage it has.?. thank you

Posted on Oct 08, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

How to clean

Posted on Sep 13, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

For fast solution is you can try to move the gear of the paper loader (inside the print in the left)

Posted on Jun 26, 2009

×

My experience is everything part i open it, cleaned every part, i rebuild the printer like a new one,reconfiguration and i reseted it too.but my printer is still blinking error both of red lamp.you know, after i changed the motor for paper mover on beside the printer, the problem is gone, no error red lamp, everything is going fine till now.

i think, you have to check your printer clearly, you have to clean all inside every part and connection cable your printer before you do something more because it can make more problem.
if your printer is not clean, it can make the motor for paper mover not good runing and make your printer error( both red lamp blink ).

hope can help you
thank you

Posted on Oct 08, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 66 Answers

Hi,

i was having that same problem, i try to change head cable and it works...

maybe you can try it too..

i hope it would help
thanks...


Posted on Oct 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Epson R230 with green led and red led blinking


This is general error of the printer. When you have to change the new mother board you should be initialized it then it can be ready mode. When you try to initialization you need printer printer adjustment program. You can batter find out from google & write down EPSON Stylus R230 Printer Adjustment program or ink reseat program.

Jun 12, 2013 | Epson STYLUS R230 InkJet Photo Printer

1 Answer

Cant print anymore print counting is almost full. how to reset count


try this

Manual reset methods several EPSON Stylus Color. Actually there are two methods to reset epson printers counter, that is using software resetter such as adjustment program or SSC service utility or using manual by combination pressing button on the printer. If Reset using software resetter you can follow the way of usage the software but sometimes software resetter for the printer is not available. The only way to reset the printer if software resetter not available you can use manual reset.
The Following manual reset for some EPSON Stylus Color Printers:
1. EPSON Stylus Color
Pressing and holding ALT+FONT+LOAD+PAUSE buttons combination
press POWER button
Release all buttons
2. EPSON Stylus Color 300
3. EPSON Stylus Color 400, 600
Pressing and holding LOAD/EJECT and CLEANING buttons
press POWER button and hold it until you will see blinking INK OUT and PAPER OUT leds
Release all buttons
In 2-3 seconds time press LOAD/EJECT and CLEANING buttons again.
4. EPSON Stylus Color 440, 640, 740, 460, 660, 670, 760, 860, 880, 1160
Pressing and holding LOAD/EJECT and CLEANING buttons
press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and hold CLEANING button, until all leds will blink.
5. EPSON Stylus Color 680
Pressing and holding LOAD/EJECT and CLEANING buttons,
press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and hold LOAD/EJECT button, until all leds will blink.
6. EPSON Stylus Photo 785, 895
Pressing and holding Maintenance and Roll Paper buttons
press POWER button, You will see blinking Error led.
Release all buttons.
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink.
7. EPSON Stylus Photo 890, 1280, 1290
Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Power led
Release all buttons
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink
In 2-3 seconds time press LOAD/EJECT and CLEANING buttons again.
8. EPSON Stylus Color 800, 850
Pressing and holding LOAD, CLEANING Color and CLEANING Black buttons
press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and release CLEANING Color button, You will see leds blinking.
9. EPSON Stylus Color 900, 980
Pressing and holding LOAD/EJECT and CLEANING buttons
press POWER button, You will see blinking INK OUT led
Release all buttons
In 2-3 seconds time press and hold CLEANING button for 10-12 seconds.
10. EPSON Stylus Color 3000
Pressing and holding PAUSE, LF/FF and DOWN ARROW buttons
turn on printer.
Release all buttons.

Mar 17, 2011 | Computers & Internet

1 Answer

Printer jamed after putting in more paper and accidently pushed the power button off. Will not respond to anything I have tried.


Reset your Printer by following these steps for your Printer Model:

EPSON Stylus Color 900, 980
Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button, You will see blinking INK OUT led.
Release all buttons.
In 2-3 seconds time press and hold CLEANING button for 10-12 seconds.
EPSON Stylus Color 3000
Pressing and holding PAUSE, LF/FF and DOWN ARROW buttons turn on printer.
Release all buttons.
EPSON Stylus Photo 785, 895
Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Error led.
Release all buttons.
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink.
EPSON Stylus Photo 890, 1280, 1290
Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Power led.
Release all buttons.
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink.

Feb 27, 2011 | Epson Stylus Photo 785EPX InkJet Printer

1 Answer

Epson R230 ink & Paper Lamp Blinking


Blinking alternately or not? If alternately, need to reset waste ink counter. SSC can fix it. But if not, it's general error. It's may be carrriage error.

Aug 02, 2009 | Epson Stylus Photo R200 InkJet Printer

2 Answers

Both of red led blinking


Try to use third party software, to reset epson counter to zero, make sure if you can that waste bin will not overflow.

try this link


http://www.fixya.com/support/t1905683-r230_photo_printer_epson_stylus_sevice

Jun 22, 2009 | Epson Stylus Photo R200 InkJet Printer

1 Answer

Iepson stylus R230


This occurs if the CD/DVD tray is open. Check if the tray is in place and try again.

Apr 23, 2009 | Epson Stylus Photo R200 InkJet Printer

5 Answers

Epson R230 ink & Paper Lamp Blinking


my epson stylus photo R230 Printer problems always
two red light blinking
please help me
thank you

Sep 29, 2008 | Epson Stylus Photo R200 InkJet Printer

6 Answers

EPSON R230 PRINTER


ONCE PRINTE COMMAND IS GIVEN PAPER IS ROLLED IN AND THEN PAPER JAM RED LIGHT BLINKS. CAN NOT PRINT ANYTHING.BUT NOZZLE CHECK PRINT CAN BE PRINTED.

Jul 23, 2008 | Epson Stylus Photo R200 InkJet Printer

Not finding what you are looking for?
Epson Stylus Photo R200 InkJet Printer Logo

2,390 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18344 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...