Question about GE Kitchen Ranges

1 Answer

Hook up a 9 inch halient for model no. JBP78W0B2WW

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 639 Answers

Dear Friend,
ngfam1 at your service
I am happy to assist you!!!

Discount Parts
Major Appliance & Consumer Electronic Parts. TOLL FREE 1-(888)-338-3790 8:00AM - 12:00 MIDNIGHT 7- DAYS A WEEK NEXT DAY DELIVERY IF IN STOCK!


Here is the service company I refer my appliance customers too!
A&E Factory Service
A Nation Wide Company. / Available 24 / 7 for arranging appointments! In the USA.
1(800) 905-9505

If this dryer is 10 years old or more do not spend any money on it!
The new ones are much more efficient! If you have to replace it buy a Speed Queen , it will do 8 loads a week for 25 years!
It's the last washer and dryer I will ever buy!!!! And less expensive than a top of the line unit!

You will be fine now!

Bless you,ngfam1

PS. PLEASE GIVE ME A GOOD RATING HERE ON FIXYA.COM BEFORE YOU SIGN OFF!

Posted on Aug 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I tell if thermostatic switch is working on the 9 inch center burner?


Hello Ron;

My name is Peter. I am a retired field service appliance technician.

I would like to help you. I work on the side so, I known what is new on the sales floors.

I need more information. Send me your model number. It is either located on a label on the face of your range after you open the door, or on the side of the door.

You are going to need to purchase a multi-meter for about $25.00 at Lowe's or Home Depot, if you do not already have one. This tool will save you hundreds of dollars in service calls. Read the manual so you will understand my instructions.

There are several reasons the burner is not working. I need to see the model circuit diagram.

Mar 07, 2016 | Kitchen Ranges

1 Answer

How can I get a user manual for my Kenmore Elite 30 inch Electric slide in range with ribbon radiant elements model number 46804


Kenmore Elite Electric Slide In Range 30 in. 41053 - Sears

www.kenmore.com/kenmore-elite-30inch-slide...electric-range...

Kenmore
Rating: 3 - ‎30 votes
The slide-in Kenmore Elite range 41053 has a true convection oven for faster pre. ...Kenmore Elite 30" Slide-In Electric Range w/ Convection - Stainless Steel ... Owners manual - English (Warranty) .... I called SEARS repair to look at my range and the repairman told me that this range has flaws with the oven fan and there is ...

Kenmore Elite 30" Double-Oven Slide-In Electric Range w

www.kenmore.com/kenmore-elite-30inch...slide...electric/p-02...

Kenmore
Rating: 3.5 - ‎30 votes
The exciting Kenmore Elite double-oven slide-in range 4111 offers all the feature. ... Versatile cooktop options include a 12-inch triple-ring element, a 9-inch Turbo Boil Flex™ element, and a ... Owners manual - English (Warranty) .... Ovens are both conventional or can be set to convection, my first bake was a cheese cake.

Nov 28, 2015 | Kenmore Kitchen Ranges

1 Answer

Model #jb700tok3 how to lift the stove top. heat warning lite will not go off


Hello. REMOVE POWER FROM THE RANGE NOW! Using a headlamp or flashlight, open the range door and look underneath the cooktop at the front. (The door covers the screws when its closed) There should be 3-4 screws depending on the model, usually black, that have to be removed. The cooktop will now lift up from the front. It is hinged(open hinges so be careful because the glass cooktop can be easily dislodged off the hinged area) underneath the control panel on the left and right sides. The elements will be mounted to the bottom of the glass. You will need to identify the defective element temperature sensor using a voltage/ohm meter. Element designation 56, LR and RR, part number WB30T10129, 6-inch size. Element designation 57, LF, 9-inch dual, part number WB30T10133. Element designation 58, RF, 12 inch, part number WB30T10130. If you are going to attempt the repair, take pictures of the wiring AND clips for each element before you start. Mark the new element with an arrow or dot, etc. with the mounting clip location numbers from the old element( see the numbers for each of the positioning holes around the rim. BE EXTREMELY CAREFUL NOT TO TOUCH THE HEATING FOILS AT ALL--THEY ARE VERY DELICATE! Have a friend/helper hold the cooktop up while you work--this will make the job much easier. I hope I helped you!

25816939-gjitcxjahx1lrasfp1beulhz-2-0.jpg

Aug 10, 2015 | GE Kitchen Ranges

1 Answer

Maytag, advanced cooking system , super capacity, error code f9


A model number would help, but an F-9 code is usually followed by a 1, 2 or 3.
F-9-1 is the board is not seeing the door lock
F-9-2 is the board not seeing the door unlock
F-9-3 is the board seeing both inputs and not knowing the condition of the door lock.

The problem is like caused by a failed switch in the door lock mechanism. This normally requires the replacement of the door lock assembly.

Nov 22, 2010 | Maytag Kitchen Ranges

1 Answer

The F-9 code comes up when we try the oven. We


Hi tessjon,

The F9 fault code is about the door latch, please check the door latch components.

Hope it helps.

Thank you for using FixYa.

Jan 09, 2010 | Maytag MER5775Q Electric Kitchen Range

1 Answer

How do I turn on the icemaker for my new used Kenmore coldspot Model # 106.56534400.


Hello. The icemaker needs to be plumbed into your cold water system to work and it also has an on off lever, usually a wire inside of the area where the ice cubes accummulate. Assumming that your fridge is plumbed already, just follow that little 1/4 inch line to where it is hooked into a larger pipe and you should see a small valve which also has to be turned on. Remember when turning a valve that right is tight and left is loose sooooooooooo turn it to the left [counter clockwise]. Regards, Joe

Dec 14, 2009 | Kitchen Ranges

2 Answers

Have a Wolf Range Model A-6-9 half the burneres don't light.


I have the same model Wolf Range and need 2 of the Robertshaw SM4 spark modules for it. Robertshaw says they are discontnued. Where can I locate 2 spark modules?

Jul 10, 2009 | Wolf Range Kitchen Ranges

1 Answer

Natural gas orifice burners


Before you get too involved, check to see if the natural gas orifices are still with the range. Usually, when the conversion is done, the person who converts the range puts the original natural gas orifices into the holder which contained the LP ones, then replaces it. Look for an inch and a half long metal strip holding the four brass orifices held on by one screw very near the range gas regulator. (the regulator is the part the gas line connects to on the range) Also, look for the conversion instructions in the original installation and set up instructions, or attached to a sheet of paper on the back of the range. You will need to change the plunger in the regulator (Unscrew the cap, flip the plunger around, and replace) and turn the orifice spud on the bake and broiler burners three full turns counter-clockwise also. (using a 1/2 inch open end wrench, counting twelve 1/4 turns) Orifices will require a 7mm or 9/32 inch nut driver or socket to change. The orifices are different for the simmer, regular, and high output burners. (have a "I", "II" and "III" marked on them to help identify them, respectively.) The left two burners are both "regular output" burners, and use the same orifices.

Apr 20, 2009 | GE Kitchen Ranges

1 Answer

OVEN DOOR LIGHT SWITCH


These instructions apply to my GE Profile JBP90 but other brands and models are similar.

1. DISCONNECT THE UNIT FROM ITS ELECTRICAL POWER SOURCE!
CONFIRM POWER IS DISCONNECTED BY OBSERVING DISPLAY GOING DARK
In your case this may mean turning off the 220V double circuit breaker or unplugging the unit cord from its power outlet.
2. Open the oven door
3. Remove the two screws under the front edge of the stove cooktop on the far left and right
4. Gently raise the cooktop 4 or 5 inches and prop it open with a small cardboard box
5. Find the door switch wire and gently pull the switch connector off
6. Remove the switch by squeezing the two metal spring tabs toward the switch and pushing the switch out toward the front
7. Inspect the switch. If its like mine, it may look a little melted and smell burnt.
8. Find a new switch online or at your nearest parts distributer
http://www.appliancepartspros.com/partsearch/model.aspx?model_id=212235
9. Installation is the reverse of above steps.

Good Luck!

Jun 25, 2008 | GE JBP90 Electric Kitchen Range

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Ismael Rodriguez...

Level 2 Expert

162 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...