Question about Mitsubishi WD-62827 62" Television

1 Answer

No one has been able to give me an answer

Hi there. I have a problem that NO-ONE has been able to assist. It is a very technical problem. Here goes: I get white, broken, horizonal, flashing lines at the top of the tv screen. It only happens in the HD format, [720p or 1080i].--Also it comes and goes! It's very wierd. For example, it will do it during a commercial, and then when another commercial comes on, it will go away. -- What is wrong with my beautiful HD television??-- Thomas K.

Posted by on

  • arcdodson Jan 11, 2009

    My Panasonic plasma does the same thing. There is a line at the top of the picture. It happens on almost every HD channel. It seems like I need a vertical adjustment, but there isn't one on my television. How do I fix this??? It's very frustrating.

  • Anonymous Jan 13, 2009

    I had a 42" wetinghouse and now have a 47" Vizio, both had the same problem. Im not sure it fixes it if you adjust the verticle, it just hides it. I can do that and it will show up in PiP. wierd. My brother had the problem and the line started growing! And it completely ate his screen after awhile. Will and can this happen and wouldnt it be easier and cheaper to just take it back than checking electrolytic caps?Who the hell knows what that is besides you? And the nteinc.com website wants me to join, no thanks and I dont understand it anyway. :/

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 579 Answers

Sounds like insufficient vertical sweep and the top lines are getting out of control.
Check all the electrolytic caps in the vertical circuit for testing dry (sorry - takes a special meter to do it in circuit) or just replace them. Look the I.C. up in the free NTE crossreference at nteinc.com get a diagram of its pinout to find what pins the power and outputs are on.
Hope ya fix it!

Posted on Aug 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Cant find my new gmailaccount


From your question, it is understood that you are not able to recollect the username that you used for Gmail. If this is the case, go to the following username-assistance page and follow the instructions:
https://support.google.com/dartsignin/answer/114766?hl=en

GuruAid.com

Sep 26, 2015 | Google Gmail

1 Answer

Hi i have isuzu rodeo auto 2007 would like to know what iol goes in transfer box please


its gear oil should have the specifications in manufacturers manual in glove box a quick call to u r local autoparts to order gear oil will give that answer by year ,make ,model they will assist you its part of the service to make sure you buy the good products you should be good

Sep 28, 2014 | Cars & Trucks

1 Answer

Ft 720r memory


Hi Mike,

Not that I'm aware of, instead of backup battery, your unit has an EEPROM, which is the memory storage facility, and if this fails, then there's your answer, it will need replacement.

If this is the case and you're not technically minded, then take it to a 2-way radio service centre, preferably yaesu authorised, and have them make an assesment and give you a quote re: repairs, otherwise if you know any HAM RADIO operators out there, ask them to assist, it wiould cast far less that way.

I hope I have been of some help to you.

Regards,
Peter

Aug 09, 2012 | Yaesu FT-720R Owners Manual

1 Answer

My LG Optimus turns itself OFF on its own. Is there a timer function with this phone?


Hi,
To answer your question : NO there is no timer set for that phone to automatically shut down, This is a known issue for this phone, So i would suggest to go back to the retailer store you purchased this, it have it replaced by a new (If You still have a warranty ).
Or you can call LG technical support regarding this issue:
Contact by Telephone Toll Free: 1 (800) 793-8896
Thank you for using fixya
Please rate me and give testimonials if ever to continue my assistance
A VERY HELPFUL RATING IS APPRECIATED, Thanks Regards
Nerdierob

Jun 05, 2011 | LG Cell Phones

4 Answers

How much does it cost to join and does it cost to ask your mechanics questions thankyou


just sign in no cost, ask or give your info, just try to be the best you can and word things in plain english and give honest advice to the best of your knowledge. welcome, this is a helpful forum platform.

Jan 10, 2011 | 1986 Toyota Celica

1 Answer

I have lost my cd to install for my belkin router what shall i do ?


Hi i got your issue

no problem if you lost the installion Cd

Step 1: Contact belkin customer support 18002235546 and select IVR option 5 4 2....they will give You a free cd

Step 2: Or contact belkin technical support 18002235546 and they will assist in installing the router witout the cd

Thank you:
Priya

Oct 02, 2010 | Belkin Wireless-G Plus MIMO Router

1 Answer

Hi , All the keys and the buttons on my nokia N95 have just stopped working this afternoon. Any ideas please ?


Dear user make sure its not water damaged if its so then give it for technical assistance to its technical department.... or due to too much data it got helded

Dec 13, 2009 | Lands Phones

1 Answer

Hp 640 cant send or receive fax(NO ANSWER FROM REMOTE FAX


Since the fax machine is about 4 weeks old, why not give it back to HP? Warranty still covers it.

May 22, 2009 | Office Equipment & Supplies

1 Answer

Safety


Hi Charlie, I am going to give you an honest answer as opposed to the technical one, because any lawyer who has never used a tool can tell you for safety you need to stay 12 inches from the blade therefore we will give you a 16 inch stick. The honest answer is that stick is so you can keep all of your fingers in one piece and you should use the stick anytime your fingers or anything else can get close enough to lose em. Common sense should prevail. Oh and by the way, as far as safety goes there should be a giant red arrow on the tabletop so people don't feed wood into a table saw the wrong direction! Good Luck to you, Hope this Fixsya!

Mar 20, 2009 | Delta Saws

1 Answer

1210M5G- warped sound on most records.


I answered here:

http://www.fixya.com/support/t303119-technic_sl_1210m5g_problem

Feb 02, 2008 | Technics SL-1210 Turntable

Not finding what you are looking for?
Mitsubishi WD-62827 62" Television Logo

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1207 Answers

The Knight
The Knight

Level 3 Expert

72640 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...