Question about HP Photosmart C6180 All-In-One InkJet Printer

1 Answer

Zone configuration how can i reconfigure my hp c6180 from zone 1 to zone 2...thnx

Posted by on

  • Anonymous Sep 20, 2008

    I have the same problem with Zones. What phone should I use, if I am in Germany. Thanks!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Just call 1*800*474*6836. Only higher techs are allowed to reset the region of the printer. Don't worry if the printer is already out of warranty. You will still not be billed, just make sure that the cartridges are still in warranty. Then tell the agent that you have a problem in regionalizing the inks. HP will support that problem for free if the ink is still under warranty. You can find the end of warranty date of the ink on the cartridge itself.

Jiffy Epe
HP Tech Support Representative

Posted on Aug 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Computer does not recognize the camera. I am


The HP Image Zone or HP Photosmart software is not installed on the computer. Install the HP Image Zone or HP Photosmart Software, or see Using Your Camera without Installing the HP camera software in your camera User's Manual.The computer is configured such that it cannot recognize the camera as a digital camera using the Picture Transfer Protocol (PTP) standard. Set the USB configuration in the Setup menu on the camera to Disk Drive mode.

Jun 30, 2010 | Canon PowerShot SD950 IS Digital Camera

1 Answer

My hp pavillion dv6000 does not boot again. The power light comes on and goes off after 2 minutes over and over again. How do i fix this?


Hi..

Unplug your sets of power cables and reconfigure complete setting from you laptop and wait for 2 min and just do the reset for two min and configure again..

Apr 08, 2010 | HP Pavilion dv6000z Notebook

1 Answer

Please tell me how to reset my honeywell hz322 hvac zone panel.


There is a way to restore the Factory Defaults via the Advanced Configuration Mode. Be careful, this will require thorough knowledge of you system to reconfigure based on your particular system. Here is a link to the manual to assist you with the Advanced Configuration Mode.
Specifically, pages 6 & 7. Visit this link:

http://www.forwardthinking.honeywell.com/related_links/zoning/truezone/install/69_2071efs.pdf

Feb 14, 2010 | Honeywell Heating & Cooling

1 Answer

HP J4680 Will not see the router or wireless internet. When I do a network configuration print there is no IP address. Please help!


  • Option 1
  • any wireless product must be hardwired to the router prior to running wirelessly.
  • otherwise use a memory stick and your OS disk to transfer setting to allow for your configuration
  • Option 2
  • reconfigure the network.
  • start with the disk to the router
  • router software will lead you to build a network

Sep 13, 2009 | HP J4680 Office Jet All-In-One Printer

2 Answers

Configure my keyboard internet button


Its not a HW ,.. its a SW issue ...
try this if u can and hopefully it works !!!
1. Click Start on the taskbar.
2. Choose Control Panel.
3. Click Printers and Other Hardware.
4. Double-click Keyboard.
5. In the Keyboard Properties window that appears, click the Buttons tab.
6. Double-click the button you want to change. The button configuration window opens.
7. Choose the button capability from the drop-down list. Enter the Display label and the Address information. (For a Web site, enter the complete Web site URL in the Address box.)
8. Click OK.
9. On the Buttons tab, click Apply.
10. Repeat steps 6 through 9 for each button you want to reconfigure.
11. Click OK when you are finished reconfiguring the keyboard.

May 09, 2009 | HP Pavilion dv6000z Notebook

1 Answer

Use HP 363 cartridges instead of 177 for my Photosmart C7183


Phone HP.  After about a month hanging on, on their premium rate number, you'll finally be put through to someone who doesn't understand the problem.  Then, after your beard has grown another inch or two, if you're lucky, you'll actually get someone who understands the problem.  Some birthday's later, you'll be connected to a technician who can talk you through a simple number of keystrokes to re-configure the printer.
Reckon this cost me 30 UK pounds - seriously -  I had to call five times  but eventually it was done.

Apr 06, 2009 | HP Photosmart 3310 All-In-One InkJet...

1 Answer

Use HP 363 cartridges instead of 177 for my Photosmart C7183


Hi,


Let me inform you that printer would be set as per the zone and here is the information regarding the cartridge details.


Zone 1
Zone 2
Zone 3
Zone 4
02
363
177
801





Regards,


Sagarjd

Nov 10, 2008 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

Unlisted device in homenetwork


no just the IP address. you have to enable to share on both computers in order to share any files.
you can share the whole hard drive of just certain folder.
first, you need to configure both machine on the same subnet, rename the machine so you see what is what. (right click on the network place> properties. right click on Local Area Connection. select the TCP/IP and configure it).
NOTE: it will be easier, if you configure all your equipment on the same subnet. (like: 192.168.168 200-10/255.255.255.0)
2). control panel> system> computer name, configure that (both machine need to be in the same group).
3). control user account, you need to asign a user password for whom ever need to access the share. (it don't work without a password.)
4). don't forget to reconfigure your zone alarm and Norton, on the ip address part.
5). restart the machine. click on the network place and see if you see the machines. double click on the machine. put in the password. you should be able to gain access to sharing the machine.

Sep 18, 2008 | Siemens SpeedStream Modem (4100) (SS4100)

1 Answer

Can't use my original ink # 363


Actually you cannot use your # 363 ink on your photosmart c6180. The ink is not compatible with the printer. Photosmart c6180 only uses HP02 vivera inks. And there is no way that you can reconfigure it because it is factory default. Unless you bought an HP02 ink from other country outside US and bought the printer in US, that's the only time that we can reconfigure the regionalization of the printer

Aug 28, 2008 | HP Photosmart C6180 All-In-One InkJet...

Not finding what you are looking for?
HP Photosmart C6180 All-In-One InkJet Printer Logo

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...