- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Apparently, this auxiliary input only works for a Kenwood CD changer or a sirius radio connection. At least that is my conclusion after finding the same problem. Let me know if you figured anything out on this.
u gotta turn the cd player off.....then press hold the volume botton...then u will see lots of option and u will also find the option to turn on the the aux and off...so u turn on the aux on...and will see it when u trun on the cd player ...
i have a kdc 135 and i had the same problem. you have to go to standby
mode, then hold down the menu button until MENU appears. then toggle up
or down with the button on the right and it will say aux. then toggle
left or right to turn aux on/off and then after that when you hit
source it will come up as an option.
On a slightly different model and only if you would venture to try:
with the iPod via cable plugged to the iP-Bus port and the unit powered off but the powersupply on -
1. press and hold for a couple of seconds the Function button (FUNC) or till the clock starts to flash;
2. the arrow keys (left/right) will move you through the different menu settings;
3. the arrow keys (up/down) will move you through the different selection for each setting;
4. look for source, external, AUX, iPod or whatever will be displayed which may refer to an external input;
5. soon as you have enabled/set the AUX, press and hold the FUNC button while turning the unit on. This will save the current setup.
Hope this also work for your DEH-P3000.
Good luck and kind regards.
if it has aux its probably going to be right on the front, its most likely mini-din, the same connector used for headphones and pc speakers, youll need a mini-din to mini-din cable, also known as an audio cable, you can get the mcheap at radio shack usualy, its a cable that allows a pc subwoofer to be hooked up to the pc's audio card, with this just turn you ipod on and control it as normal while the deck is set to aux and you should hear your ipod. some decks have actual ipod connectors that work differntly but I personaly don't know much about them, I have the mini-din connector, and an ipod shuffle