Question about Kenwood eXcelon KDC-X879 CD Player

1 Answer

Toc Error Hey guys! i just purchased a refurbished KDC X990 and it is installed, everything works except the cd drive is screwed up...I have tried everything from unplugging power and resetting to inserting new cd;s and still get the crummy Toc Error message. There is a 30 day warranty...wondering if you all have any suggestions before i send the hunk of junk back...fustrated in south carolina. I wish these kenwood people would examine and test these drives before they ship them to some poor ol guy clear across the country. Is there anything i can do?

Posted by on

1 Answer

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toc error


TOC is short for "table of contents". It tells the memory what is on the disc and where...... Does this do this on all cd's?? If so, the disc drive motor is probably at fault. If it's one or two discs, it's probably a scratched or smudge near the center of the disc. CD's play from the inside out.....they start with the TOC.

Sep 13, 2009 | Kenwood KDC-MP332 CD Player

1 Answer

TOC ERROR


mine too can anyone help?what did u do

Sep 19, 2008 | Kenwood KDC-MPV622 CD Player

1 Answer

Kenwood KDC-MP528 CD TOC ERR


Every one of those Kenwoods that I have fixed with that error needed the laser pick up replaced. so there is no easy fix for it.

If you have tried several disc's and they all have a TOC err, and you know the disc's are in decent condition, then you will need the pick up replaced.

First try cleaning the disc you are using. I use windex and a soft cloth like a bath towel, it works great at getting fingerprints and other stuff off the disc without scratching the disc. A bad fingerprint or a bad scratch right at the innermost part of the disc (where the TOC is located) will cause any CD player to not read the TOC, producing a TOC ERROR. you never know, you might get lucky.

Jun 17, 2008 | Kenwood KDC-MP528 CD Player

1 Answer

Toc error


i have had the same deck for four years and installed and removed from 4 different vehicles. the deck has been through some stuff lets put it that way. mine does the same thing as yours, i have found that you just keep ejecting the disk untill it reads. usually only takes a couple times and then mine works just fine.

May 26, 2008 | Kenwood KDC-MP828 CD Player

1 Answer

E-99 and other times time TOC ERROR shows up.


hi TOC error sounds like its the laser is faulty. you could try a cd cleaning disc. this may cure the problem..


Regards

Mark
www.blueice-electronics.co.uk

Feb 25, 2008 | Kenwood KDC-MP205 CD Player

1 Answer

Toc code keeps comeing up on my kenwood kdc x5589


Hi, toc error means that the laser is struggling to read the Table of Contents which tells the unit where all the information is on the disc, it may be something as simple as the lens needs cleaning or something as complicated as the laser needs replacing, but you could try running a cd disc cleaner through it first. Good luck......

Jan 24, 2008 | Kenwood eXcelon KDC-X559 CD Player

1 Answer

TOC error


toc stands for table of contents error if it is a copied cd it is probably how it was written if not do other cds work?

chris

Oct 29, 2007 | Kenwood KDC-8024 CD Player

1 Answer

What is E6 and toc error


I don't have info for E6, but TOC error means it's not able to read the disc due to dirt, scratches, or other damage.

Sep 25, 2007 | Kenwood KDC-MP235 CD Player

1 Answer

TOC Error


Burned ones? Or do "real" CDs do it, too? If ALL do, then the laser was damaged or misalligned and will have to be serviced.

Sep 15, 2007 | Kenwood eXcelon KDC-X879 CD Player

1 Answer

What does toc err mean?


TOC is table of contents. Typically if its on a recorded cd try burning a cd from antoher computer and try it, if it works its most likely that your burner or software or ccd's your using are bad. Also is it a MP3 disc your trying to play? If so then you MUST burn it as a MP3 cd. You cant just burn MP3's to a CD and it read them. If this is the case thats why you are getting the TOC error because its not writing to the CD whats on the CD on the TOC area of the disc.

Sep 14, 2007 | Kenwood KDC-MP228 CD Player

Not finding what you are looking for?
Kenwood eXcelon KDC-X879 CD Player Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Kenwood Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...