I also found this annoying, the tracker chassis is similar to the ip-op chassis, which you can find instructions for online. however when the chassis is folded, you first have to adjust the handle, to do this you push in the round black buttons either side of the handle, make sure the handle is in a strait line with the rest of the chassis. also check that the front wheels are in NON steering mode by pushing in the red button on the left hand side of the chassis. once this is ok, you go back to the handle and push in the red button in the middle of the handle that confusingly says fold, as you push the button in, twist the black fold casing downwards, put your foot on the bottom crossbar and pull the handle towrds you. the chassis should start unfolding keep pulling the handle and pushing the bottom cross bar with your foot until the chassis clicks and locks on both sides. da dah!!!!! there you go. now wait till want to fold it again bloody thing is a nightmare without instructions.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To fold down a Tracker City, firstly make sure that the front wheels are locked into fixed, non-steering mode, and that the adjustable-height handle is in one of the middle positions.
Look at the twist-grip in the middle of the handle. Press the button and simultaneously twist the collar in the direction of the arrow. The chair should begin to close at this point.
Next, find the secondary lock device, which is operated by means of a lever/tab on one side of the handle. Pull this upwards, tilt the chair forwards and continue the closing action until it is fully closed.
Align the front wheel using your foot, if necessary, to prevent the rear wheel from hitting it. To store the chair, fold down the height-adjustable handle.
Don't forget to keep the pushchair well lubricated, preferably using a silicone spray.
Why not ask firstname.lastname@example.org for a user-guide for the Tracker City?
The Tracker is designed to be folded and unfolded easily, by one person.
To unfold: If your Tracker has an adjustable handle, ensure that it is in one of the middle positions. On the central twist grip, push in the red button and turn the grip in the direction of the "FOLD" arrow. The pushchair should now begin to open. Placing your hand on the side moulding, pull on the handle until the primary locks on both the left and right hand sides engage with a click. The secondary lock should automatically engage.
To fold: First of all, make sure that the front wheels have been locked into fixed, non-steering mode. Also, ensure that the adjustable handle is in one of the middle positions. Press the red button on the twist grip and simultaneously turn it in the direction of the "FOLD" arrow. At this point, the chair should start to close. Next, look for the secondary locking device. This plastic tab should be situated just below the handle grip on the left-hand side. Pull it upwards, whilst tilting the chassis forwards and continuing the folding action until it is fully closed. Align the front wheel with your foot, if necessary, and fold down the adjustable handle to store the chassis.
To fold a Raider AT pushchair, first make sure that the front wheels are locked into the non-steerable mode. Next, look at the twist-grip in the middle of the handle. Press the central red button and simultaneously turn the collar in the direction of the arrow. The chassis should begin to close at this point. Then find the lever on the side that operates the secondary locking device. Tilt the chair forward and continue folding until it is fully closed. It may be necessary to align the front wheels with your foot in order to enable the chair to close fully. An instruction manual, with diagrams, is available from email@example.com
Firstly, remember to lock the swivel wheels in the non steering
mode before folding chair.
To fold, firstly press the red button and simultaneously, turn the handle collar in the direction of the
"FOLD" and the chair will begin to close.
Operate the secondary safety device by pulling the plastic tab.
Tilt the chair forward and continue the folding action until the chassis is fully closed. Why not ask for a user manual at firstname.lastname@example.org
If your Tracker has an adjustable handle, ensure that it is in one of the middle positions. On the central twist grip, push in the red button and turn the grip in the direction of the "FOLD" arrow. The pushchair should now begin to open. Placing your hand on the side moulding, pull on the handle until the primary locks on both the left and right hand sides engage with a click. The secondary lock should automatically engage. Find out more by obtaining an instruction manual from email@example.com
To unfold the Raider, first press the red button in the middle of the handle and then twist the twist-grip in the direction of the arrow. Once you've done this, keep it twisted while you place your foot on the horizontal footplate. Once the chassis starts to open, pull sharply on the handles until both the primary and scondary locks engage. Make sure that the red latch is not visible, and check the security of the primary and secondary locks by gently pulling on the handle and pushing on the left and right mouldings.
If you have a "TS" system. The letters "TS" will be inside a triangle on the side of the seat or chassis. You can also visit your local stockist or contact Bebecar direct on 01692 408807 for more info.