Question about Pioneer DEH-P5900IB CD Player

4 Answers

Pioneer DEH-P4900IB Changing Time and Date

How do you change time and date with the 4900IB...I've tried to do everything from using the function button to even pressing the small clock button to adjust the clock and date..Can anyone help?

Posted by on

  • Anonymous Nov 10, 2008

    Ihave the same problem please let me no when a solution is offerb.

  • daddyspoots
    daddyspoots Jan 08, 2013

    Thank you for your help!

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

When the radio is off hold the on the left bottom side for about 3 or 4 seconds and a menu should come on....keep hitting that button till the time comes on. use the up down left right to change it and once ur done just turn on the radio...good lucj

Posted on Dec 29, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

1st wait till the Pioneer logo is scrolling across. Then hit the Function button for 3 - 4 seconds.

Posted on Mar 20, 2010

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Clock set on deh-p4900ib. hold function for 3-4 seconds. menu will apear ADJ. with arrows

Posted on Sep 16, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I was having trouble like you but I think I figured it out. First be on tuner with it on. Next push in the volume knob. Hold for 3-4 seconds, you will see pioneer flash on screen. Next hold function button, lower left. The time and date will pop up. Use left and right arrow to go to desired change then up and down to actually change. Some might be unneeded but if you follow those exact steps it should work for you as well. I know how annoying this probably was for you.

Posted on Nov 14, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Am I missing something simple? Read the manual and can't set the time or date on KDC MP628.


Step 1:

Hi there,

In standby mode:


Enter Menu mode:
Press the [MENU] button for at least 1 second.
"Menu" is displayed.

Step 2:


Select Clock Adjustment mode:
Push the Control knob to [FM] or [AM].
Select the "Clock Adjust" display.

Step 3:


Enter Clock Adjust mode:
Press the Control knob for at least 1 second.
The clock display blinks

Step 4:


Adjust the hours:
Push the Control knob to [FM] or [AM].


Adjust the minutes:
Push the Control knob to [Back Search] or [Forward Search].

Step 5:


Exit Clock adjustment mode
Press the [MENU] button.

Step 6:


Date Adjustment...

Select Date Adjust mode
Push the knob to [FM] or [AM].
Select the "Date Adjust" display

Step 7:


Enter Date Adjust mode
Press the Control knob for at least 1 second.
The date display blinks.

Step 8:


Selecting the item (day, month, or year) to
adjust

Push the Control knob to [Back Search] or [Forward Search].
The items that are blinking are items that can be
adjusted.

Step 9:


Adjust each item
Push the Control knob to [FM] or [AM].

Step 10:


Repeat step 8 and 9 operation and adjust the
date

Step 11:


Exit Date adjustment mode
Press the [MENU] button.

Step 12:


Setting the date format.

Select Date Mode
Push the Control knob to [FM] or [AM].
Select the "Date Mode" display.

Step 13:


Select the date format
Push the Control knob to [Back Search] or [Forward Search].

Step 14:


Exit Menu mode
Press the [MENU] button.


Hope this helps.


Cheers,

Scott

Jan 14, 2013 | Kenwood KDC-MP628 CD Player

1 Answer

How to set the time on dmr eh59


Automatic clock setting is done if you initially accept to use the guide plus system (should do). Only if for some reason it does not work, you can set the clock manually following these steps Clock Usually, the unit's setup function automatically adjusts the
clock to correct time. Under some reception conditions, however,
the unit cannot set the clock automatically.
In this case, follow the operation steps below to manually set the clock.
1 Press [3, 4] to select "Off" of "Automatic" and press
[OK].
2 Press [2, 1] to select the item you want to change.
The items change as follows:
Hour,Minute,Second,Day,Month.Year

3 Press [3, 4] to change the setting.
You can also use the numbered buttons for setting.
4 Press [OK] when you have finished the settings.
The clock starts.
If a TV station transmits a time setting signal, and when
"Automatic" in the Clock setting menu is set to "On", the automatic
time correction function checks the time and if necessary it is
adjusted several times every day.








Sep 25, 2012 | Panasonic DMR-EH59 250GB Multi Zone Region...

1 Answer

Setting time on wincraft desk clock


Directions for Desk Clock - Without the C?/F? button


To change the Temperature:

Press the "S" button once (this will change from Fahrenheit to Celsius)


To change the Time and Date:

Press the "M" button once to change time to or from military time

Press the "S" button once to change the hour

Press the "S" button again to change the minute

Press the "S" button again to change the year

Changing the year will also change the day of the week

Press the "S" again to change the month

Press the "S" again to change the date


To set the Alarm:

Press the button with an alarm clock on it

Press the "S" button once

A flashing 12:00 should appear

Press the arrows to set the hour

Press the "S" button again to set the minutes

Press the "S" button again to change the "ring" of the alarm

There will ne a number below the time the alarm is set for

Use the arrows to advance through the options


To turn the alarm functions completely off:

Press the button with the alarm clock on it

Press the "S" button five times

When three dashes appear where the time would be, it is off.

Press the "M" button three times to get back to the main clock function


To clear the secondary clock:

You can set two different times on the clock, so if you travel frequently you can have a home time with alarm and a travel time with alarm saved and ready to go. There is a primary time, the one you normally see on the clock with an alarm clock function after it. There is also a secondary time with an alarm function after it.

Clearing the secondary clock will make it easier to know when you get back to the primary clock function.

Press the "M" button three times

Press the "S" button seven times

When three dashes appear where the time would be, it is off

Press the "M" button two more times


And you are Done!





Jan 02, 2012 | Wincraft FLORIDA GATORS OFFICIAL THE SWAMP...

1 Answer

I did not get any instructions with my son's ben10 four arms projection alarm clock, and cant figure out how to even set the time, does anyone have instructions please


Hi

Hopefully you've figured this out by now, but if not then I hope this helps.

Alarm Setting - Press Mode twice to change the alarm time. Set switches between hour and minutes and Adjust changes the time. The alarm is on when there is a symbol at the top right on the display. Press and hold Set then press Adjust to toggle the alarm on or off.

Time/Date Setting - Press Mode three times to change the current date/time. Use Set to move between the hour, minutes etc and Adjust to change them, as with the alarm.

Pressing Mode once accesses a stopwatch function. Adjust to start/stop and Set to clear.

Dec 25, 2010 | Toys

1 Answer

Need to change the time


You weren't precise if the change was due to Daylight Savings Time or just a general need to change the time so I'm giving you the complete set of instructions for changing the time

Setting the Time
Note: Use 24 hour and 60 minute format when setting the time.
For example: 2:00 pm = 14:00.
1. To make changes to your clock’s time setting, you must first put the clock into Program mode. See
section Accessing Program Mode to Update Calendar, Time and DST for instructions. When the
display flashes P1 dAtE, press the ◄ left button until P2 CL oc appears, then press the ● right
button.
2. Press the ◄ left button to choose 12-hour AM/PM display or 24-hour military time, then press the ●
right button.
3. Press the ◄ left button until the correct hour appears, then press the ● right button.
4. Press the ◄ left button until the correct minutes appear, then press the ● right button.
5. When the display flashes the correct time, press the ● right button.
6. The display flashes P2 CL oc again. To make changes to the DST start date or DST end date, press
the ◄ left button one time until P3 BDLE appears in the display and continue to How to Set the
Begin Date for DST. Otherwise, press the ◄ left button several times until END appears, and select
the ● right button to save your updated settings.
How to Disable DST
To disable Daylight Saving Time, set the DST beginning date equal to the ending date (i.e., DST begin
date = 08-03-09; DST end date = 08-03-09).
See next for details regarding setting the DST begin date and end date. Typically, clocks operating in
Arizona, Hawaii and Puerto Rico do not observe DST, and disabling the DST function typically applies to
those areas only.
By default, and unless otherwise modified, DST takes effect on the first Sunday in April and ends on the
last Sunday in October (this was the United States standard through 2006).
How to Set the Begin Date for DST
Note that in 2007 the standard for DST changes to a different start date and end date. The steps below
correct the change in the new start date for DST. The new start date and end date need only be changed
once, since the clock’s rolling calendar function auto-calculates the start date and end date for DST every
year thereafter.
Note that if the begin date for DST has passed, in addition to modifying the begin date (and end date),
you will also need to modify the time.
1. When the display flashes P1 dAtE (see earlier section Accessing Program Mode to Update
Calendar, Time and DST for instruction), press the ◄ left button until P3 bdLt appears, then press
the ● right button.
2. Press the ◄ left button until the correct year appears, then press the ● right button.
3. Press the ◄ left button until the correct month appears, then press the ● right button.
4. Press the ◄ left button until the correct date appears, then press the ● right button.
5. When the display flashes the correct year, month and date, press the ● right button.
6. When the display flashes P3 bdLt, press the ◄ left button once to select next menu option, P4
EdLt, which provides a way to set the end date of the Daylight Saving period.
Setting Daylight Savings Time for model PIX-10/15/21
Page 4 of 4
How to Set the End Date for DST
Note that in 2007 the standard for DST changes to a different start date and end date. The steps below
correct the change in the new end date for DST. The new start date and end date need only be changed
once, since the clock’s rolling calendar function auto-calculates the start date and end date for DST every
year thereafter.
1. When the display flashes P4 EdLt (see conclusion of previous section How to Set the Begin Date
for DST for instruction), press the ● right button.
2. Press the ◄ left button until the correct year appears, then press the ● right button.
3. Press the ◄ left button until the correct month appears, then press the ● right button.
4. Press the ◄ left button until the correct date appears, then press the ● right button.
5. When the display flashes the correct year, month and date, press the ● right button.
6. The display flashes P4 EdLt again. Press the ◄ left button several times until END appears, and
select the ● right button to save your updated settings.
Note: To disable the Daylight Saving Setting, set the beginning and ending date to the same date.

Apr 16, 2009 | Office Equipment & Supplies

1 Answer

Set the time and date on a canon mp25dv/instructions


To set date:
1. Press the calendar/clock button (display should show date)
2. Press and hold the 'time set' button for 3 seconds (first digit of the date should flash)
3. Use the numeric keys to enter date using mmddyyyy format
4. Press 'time set' button

To set time:
1. Press the calendar/clock button twice (display should show time)
2. Press and hold the 'time set' button for 3 seconds (first digit of the time should flash)
3. Use the numeric keys to enter time using hhmm format, press 'AM/PM' button as needed
4. Press 'time set' button

The '12/24' button changes between 12 hour and 24 hour format for time.
The 'format' button changes the date format from mmddyyyy to ddmmyyyy or yyyymmdd.

Feb 26, 2009 | Canon MP-25DV Calculator

1 Answer

I have a canon SD110 and can't figure out how to change date. I don't have a manual.


Manual available for viewing/download here. To change the date/time:
1. With camera on, press the Menu button.
2. Use left/right arrows to select Setup menu (icons of tools)
3. Use up/down arrows to select Date/time icon (clock and calendar)
4. Press Set button
5. Use left/right arrows to select year, month, day, hours, minutes and then use up/down arrows to set correct value.
6. When everything is correct, press Set button.
7. Press Menu button to return to normal mode.

Dec 10, 2008 | Cameras

1 Answer

Need operating instruction


I dont know where to find an instructions booklet but I can help with setting the time/date:
To set the time and date (you have to do them both together):
  • First press and hold the 'CLOCK' button until it beeps then let go.
  • You will then be required to select the year by scrolling up or down with the 'TIME SET' rocker switch on the right hand side.
  • Once you have the right time, press the 'ENTER' button, to the right of the rocker switch once.
  • You will then be required to select the the month. Do this by once again using the 'TIME SET' rocker switch and then pressing 'ENTER'.
  • You will need to repeat this to select the date (day).
  • You then use this same process to select the time, starting with the hour and then the minute.
  • After you have finnished selecting the minute, press the 'ENTER' button once and then the set time, with the day in the top left corner will be shown. You do not need to press anything else. Your clock is now set.
REMEMBER to press the 'ENTER' button after selecting each thing to move you on to the next thing to set.

TIP; Beside the 'CLOCK' button there is a button which says 'D.S.T SUMMER T'. This is the button which automatically switches your clock from british summer time to winter time and back again. It means that you do not need to reset your clock every time. Make sure that it is in the right setting when you set the clock otherwise it could get confusing. You will know if it is on british summer time because a small sun with a clock face appears in the top right corner of the screen.

Good Luck x

Mar 16, 2008 | Sony ICF-C273 Clock Radio

2 Answers

Clock radio, small


This little guy has the most complicated date setting procedure I have ever seen! From the manual: "Manual Time and Date Settings 1. To change your time setting, press and hold the J Time Set Button so that the clock display begins flashing. 2. While the display flashes, press the 1 Reverse and 6 Forward Buttons to set the time. Hold a button for a few seconds to set the time rapidly. Be sure to set the correct AM/PM time, shown by the PM Indicator. 3. After setting the time, press the 4 Enter Button or wait about ten seconds for the clock to beep twice and the setting to lock into place. 4. To change the calendar, press and hold the 9 Date/7-5-2 Button until the display shows the flashing year. 5. Press the 1 Reverse and 6 Forward Buttons to set the current year. When you have selected the year, press the 4 Enter Button, then use the 1 Reverse and 6 Forward Buttons to set the month/day. 6. After you have set the date, press the 4 Enter Button or wait for the display to beep twice and lock into place." You can download the manual from the link below: http://www.timexaudio.com/pdf/T307_IB56281_07.pdf Please update the question & let us know if the information given was useful to you - Good Luck!

Aug 24, 2007 | Timex (T307S) Clock Radio

7 Answers

How do you set the clock/calendar on the Canon MP25DV?


on the bottom of your calculator is a reset button, with a paperclip or a pen press that button. Then, press the calendar, clock key. next, press the equal sign key until the date is flashing type in the date using 11172006. press the equal sign again and the date is set. Next press the calendar, clock key again the time should show up (12-00-00)press the equal sign again until the time starts to flash. enter in the time using 0903 (9:03) press the equal sign again. Time is set. to display the date and time when not using the calculator, press the calculator, clock key 2x's. to go to compute mode press the red CE/C button.

Nov 04, 2006 | Canon MP-25DV Calculator

Not finding what you are looking for?
Pioneer DEH-P5900IB CD Player Logo

2,404 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio & Video Experts

Michael Kovalik III
Michael Kovalik III

Level 2 Expert

117 Answers

The Knight
The Knight

Level 3 Expert

73086 Answers

yadayada
yadayada

Level 3 Expert

71231 Answers

Are you a Pioneer Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...