Question about Teac SRL50 Clock Radio

1 Answer

Teac SRL100 How do I set the alarm clock?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

Be sure the radio is set to off or standby.
Hold down the alarm button (#1 or #2) until the disply begins flashing.
Use the TUNER/CLOCKSET dial to change the display to the time you want the alarm to go off.
Press the alarm button briefly to return to normal operation.

Posted on Sep 08, 2008

  • barryzee Jun 30, 2011

    is there a way to set the alarm to wake to the CD?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Teac model LT-1 how to set clock


To set time on TEAC CD Receiver LT1
Press Memory/Clock Adjust button until numbers flash.
First display is 24/12 for choice. Change with >>> button.
Press Memory/Clock Adjust button again and Hours digit
flashes. Set with >>> or <<<.
Press Memory/Clock Adjust button again and Minute digit
flashes. Set with >>> or <<<
In 12 hour mode "PM" will be displayed

Sep 23, 2012 | Teac LT-1 Clock Radio

1 Answer

How to set clock on the teac sr-l100 just bought at yard sale, no info book. thanks d


The "set time" button on my SR-L100 is located inside the CD compartment. To set the time the unit needs to be in the standby mode. Press and hold the set time button until the time blinks, then use the tuning/clock adj. dial to set it. Hope this helps!

To set the alarm on the TEAC SLR 100:
Be sure the radio is set to off or standby.
Hold down the BUTTON for the alarm you wish to set (#1 or #2) until the TIME ON THE DISPLAY begins flashing. Use the TUNER/CLOCKSET DIAL to change the display to the time you wish the alarm to go off. pRESS THE ALARM BUTTON BRIEFLY TO RETURN TO NORMAL OPERATION.


May 28, 2011 | Teac SRL50 Clock Radio

1 Answer

Teac R2 clock radio--Cannot set the clock.


Press and hold the CLOCK ADJUST button for more than 3 seconds.
"SET" and "CLK" appear alternately in the display.
Turn the MULTI JOG knob to adjust time.
Press the CLOCK ADJUST button again to finish.

Dec 29, 2008 | Teac R2 Clock Radio

1 Answer

TEAC SRL100


I need to set the clock on the srl 100

Jul 11, 2008 | Teac SRL50 Clock Radio

1 Answer

Need operating instruction


I have the same problem, I called the company but they want to charge you $8.95 +S&H, said that I would figure it out on my on. But here is the number. 323-727-4240

Jun 23, 2008 | Teac SRL50 Clock Radio

3 Answers

TEAC SRL100 Set clock


The "set time" button on my SR-L100 is located inside the CD compartment. To set the time the unit needs to be in the standby mode. Press and hold the set time button until the time blinks, then use the tuning/clock adj. dial to set it. Hope this helps! Ted

May 26, 2008 | Teac SRL50 Clock Radio

2 Answers

IPod circuit board


SDI Technologies Inc. has part just got tto there page and ask them for ipod dock connector part (part # IH5-101)

Feb 24, 2008 | Clock Radios

2 Answers

Right clock time


Hold the memory button on the remote control, wait for the written "SYNC ON" on display and then press the track forward (one on the right with the double arrow).

Now normally set the clock.

Dec 02, 2007 | Teac SRL200i/B Clock Radio

1 Answer

How do you set the wake up? So the radio turns on automatically? each morning


I did not find my manual, but this worked for me. Set the clock to be a 24 hour clock by pressing and holding the Memory/Clock Adj button. The display will show 24h or 12h. Use the fast forward button to change from 12h to 24h. Press the Memory/Clock Adj button again and use the fast or reverse forward buttons to change the time to read, for example, 13:00 instead of 1:00 if the time is 1pm. Press the Memory/Clock Adj button again to set the minutes.When you are done setting the time, press and hold the Timer/Sleep button. Either a time or "0:00" will appear in the display with the word "TIMER" flashing above it. Quickly press and hold the Memory/Clock Adj button until the first digit in the time starts flashing. Set the hour that you wish the alarm to sound using the fast or reverse forward buttons, just like you do for setting the time. Press the Memory/Clock Adj button again to set the minutes, and one more time to finish. The word "TIMER" will stop flashing and go solid, and the display will return to the time of day. When the alarm sounds, you can hit Snooze which will give you 5 more minutes, or you can turn the Clock Radio off. Pressing the Timer/Sleep button again will turn off the timer (alarm) and pressing and holding it again after that will turn it back on.

May 28, 2007 | Teac LT-1 Clock Radio

Not finding what you are looking for?
Teac SRL50 Clock Radio Logo

Related Topics:

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Teac Clock Radios Experts

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers

Steve

Level 3 Expert

3287 Answers

ray gallant

Level 3 Expert

36182 Answers

Are you a Teac Clock Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...