Question about Toshiba e740 Pocket PC

1 Answer

Wi-Fi I have an e740 with wi-fi, but have never been able to establish a wi-fi internet access connection. When I sit in the airport, the machine can see the wi-fi sites available, (I use the scan facility to find these) but I can never then get my machine to connect. I have followed all the steps in the users manual but my machine doesn't connect - internet explorer just says I need to change my connection settings, but these only give me access to modem dial-up settings as far as I can tell. I am sure there are a multitude of settings I need to adjust, but I just can't figure them out. In fact, I have a Belkin wireless system at home, and although the e740 can see the router, I can't figure out how to make it use the router to create an internet connection through my home broadband system. I am not a complete computer novice, but this is getting me down!

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 903 Answers

You will not believe me but I have a similar problem. I have also Belkin router at home and wireless connection with my e800 works perfect. A few days ago I have tried to connect my PDA to wireless router of my best friend. His wireless network is protected like mine and after configuration of all settings I had no success. The funny thing is that PDA show me the status CONNECTED but I can not use the internet explorer. Like I said, at home with my Belkin it works properly. I can really not explain what the problem is.

Posted on Sep 08, 2005

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do we get free internet on a pc?


Short answer: There is no free internet.

If you have a smart phone with an internet connection and wi-fi hotspot capability, you can use your phone as a tether device to connect using wi-fi. If your PC does not have wi-fi capability you will need to purchase either a USB wi-fi adapter or peripheral card for under $20. Make sure you have a data-plan on your phone that would support your usage.

Otherwise, you'll have to camp outside of a Starbucks or other establishment providing free wi-fi services.

Dec 28, 2017 | Internet Computers & Internet

Tip

How do I Get Wi-Fi on my iPod Touch if it Says No Wi-Fi


<p>One of the most useful features of the iPod Touch is the ability to use the Internet through a WiFi connection if you have a wireless home network and within range of your router, you can access the Internet via your iPod with ease. If you're in public, you can use the free wireless internet businesses such as hotels, cafes and airports. If you are not in a Wi-Fi zone, will warn you that your iPod will not be able to get online. When this happens, then you need to move to an area that has Wi-Fi <br /> <p><br /> <p>1. Confirm your wireless connection is configured correctly by checking if you can get online on your home computer. If your router is not configured correctly, you will not be able to use their access to Wi-Fi with your iPod. <br /> <p>2. Go to a place where you know Wi-Fi is available. In urban areas, Wi-Fi is available in many businesses and families. Press the "Settings" icon on your iPod, click on "Wi-Fi" to search for available networks in the area. If there are none that appear, confirming the Wi-Fi icon at the top of the page is set to "On" instead of "Off". If no network can see, you're in an area where there is Wi-Fi available. <br /> <p><br /> <p>3. Click the name of an available Wi-Fi network and enter the correct password. Sometimes you may not be able to access the network, because you do not have the password. While companies such as pubs and hotels to their networks without protection for the enjoyment of their patrons are usually password protected networks. <br />

on Aug 05, 2011 | Computers & Internet

1 Answer

Can't connect iPhone 5s and hp 1220c


Sir/Madam

iOS: Troubleshooting Wi-Fi networks and connections Symptoms This Issue is Related To Your apple Mobile And Make Sure You Already Install HP Printer Software In Your Desktop or Laptop. If yes I suggest you perform below Solution for Your Apple 5s and HP Priter Connectivity Issue:

Learn how to troubleshoot WiFi.Issues you may encounter while using your iPhone, iPad, or iPod touch.

Resolution Occasionally while using your iOS device, you may notice unexpected Wi-Fi behavior: Difficulty locating or connecting to a network
Unexpected Wi-Fi signal strength or disconnects
Inability to access the Internet
Not automatically connecting to WiFi when expected
Follow these steps to troubleshoot the above issues:
1.Be sure you're in range of your Wi-Fi router (access point).
2.TapSettings WiFiand turn WiFi off and on. If your Wi-Fi setting is dimmed,follow these steps.
1.Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
2.Restart your iOS device.
3.Tap Settings WiFi and locate the WiFi network to which you're connected.
4.Tap and Forget this Network.
5.Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
6.Turn your Wi-Fi router off and on. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
7.Update your deviceto the latest version of software.
8.Update your Wi-Fi router to the latest firmware. For AirPort Base Stations,install updates using the AirPort Utility.

If the issue is still unresolved Follow the steps below for the issue you're experiencing.
Collapse All'Expand All

Unable to locate a Wi-Fi network

Unable to connect to a Wi-Fi network

WiFi disconnects or signal strength is less than expected

Unable to access the Internet while connected to Wi-Fi

Unable to automatically connect to Wi-Fi

Additional Information Find information onconnecting to a Wi-Fi network.
Some third-party routers may not be compatible with all iOS devices, even after updating to the latest firmware. If your iOS devices can successfully connect to other Wi-Fi networks, contact your router's manufacturer to ensure that your router is compatible with your iOS device.
See recommended settings forconfiguring your Wi-Fi router for use with iOS devices.

Notes
1.iOS devices sold in China may use the term Wireless LAN (WLAN) instead of Wi-Fi. Not all China iPhone models supportWLAN.
2.If needed, please consult with your network administrator (which may be your Internet Service Provider) for assistance with this step.
3.iPhone 5, iPad devices, and iPod touch (5th generation) are the only iOS devices that can connect to 5 GHz networks.

If You Still Haveing Problem then Visit official Below Apple Website URL Link:
http://support.apple.com/kb/ts1398

Or

In case you still having HP Printer Issue Then Follow Us On:


HP Printer Support

Feb 12, 2014 | HP DeskJet 1220c InkJet Printer

1 Answer

How to connect to the wifi with 3g iphone


Hello Jane,

When using a Wi-Fi network with your iPhone, you may occasionally encounter the following issues,Unable to locate or join a nearby Wi-Fi network,Weak or low Wi-Fi signal strength,Connected to Wi-Fi network, but unable to access the Internet.
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again. Verify that you are in range of your Wi-Fi router or base station. Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on. Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet. Update your Wi-Fi router to the latest firmware.

Jun 03, 2011 | Lands Phones

1 Answer

The router is blinking a yellow light


Here are some of the more common reasons that the status light may blink amber:
  • The Wi-Fi base station has not yet been configured because it is new.
  • The Wi-Fi base station has been reset.
  • A new firmware update is available for the Wi-Fi base station.
  • No IP address is available for the Wi-Fi base station.
  • A Wi-Fi base station in Extended Mode is out-of-network Wi-Fi range of a primary Wi-Fi base station.
  • The WAN Ethernet cable is unplugged from the Wi-Fi base station.
  • The Wi-Fi base station lacks a path to the Internet (or local router).
  • Internet access may be temporarily unavailable from your Internet Service Provider (ISP).
  • Your AirPort Time Capsule has detected that the internal hard drive has reported a SMART error, and is failing (This requires firmware 7.5.2, and AirPort Utility 5.5.2).

Feb 10, 2011 | Apple AirPort Extreme Router

1 Answer

What is wifi


Hi,
Wireless local area network is a local area network that uses high frequency radio signals to transmit and receive data over distances of a few hundred feet, uses ethernet protocol.

In simple word allow you to surf internet without any internet cable connection, Wi-Fi enabled device such as a personal computer, video game console, smartphone or digital audio player can connect to the Internet when within range of a wireless network connected to the Internet. The coverage of one or more (interconnected) access points called hotspots, can comprise an area as small as a few rooms or as large as many square miles. Coverage in the larger area may depend on a group of access points with overlapping coverage.

In addition to private use in homes and offices, Wi-Fi can provide public access at Wi-Fi hotspots provided either free-of-charge or to subscribers to various commercial services. Organizations and businesses - such as those running airports, hotels and restaurants - often provide free-use hotspots to attract or assist clients. Enthusiasts or authorities who wish to provide services or even to promote business in selected areas sometimes provide free Wi-Fi access.


Thanks....!!!

Nov 06, 2010 | Nokia N81

1 Answer

There is a local wfi fi with no password,it does not show up in airport,how does one go about connecting to to this wifi?if entered in ,,join network,, airport,it cannot find it?


Hi,

One cannot connect with wi fi with no password near the Airports or other places of high security. You need permission from the Owner of wi fi of that area. After getting permission to access the wi fi, you will be given a pass word.

Hope this will clear your doubt.

Thanks...

Oct 23, 2010 | Computers & Internet

1 Answer

What is wi fi whats does it do


Hi,

Wi-Fi stands for wireless fidelity. The term Wi-Fi, which is alternatively pushed by the Wi-Fi Alliance, a trade group that pioneered commercialization of the technology. Wi-Fi is mostly about connecting to the Internet without physically attaching your computer to anything. Mostly it's about using laptop computers.


A Wi-Fi enabled device such as a personal computer, video game console, mobile phone, MP3 player or personal digital assistant can connect to the Internet when within range of a wireless network connected to the Internet. The coverage of one or more (interconnected) access points — called a hotspot — can comprise an area as small as a few rooms or as large as many square miles. Coverage in the larger area may depend on a group of access points with overlapping coverage. Wi-Fi technology has been used in wireless mesh networks, for example, in London.

In addition to private use in homes and offices, Wi-Fi can provide public access at Wi-Fi hotspots provided either free-of-charge or to subscribers to various commercial services. Organizations and businesses - such as those running airports, hotels and restaurants - often provide free-use hotspots to attract or assist clients. Enthusiasts or authorities who wish to provide services or even to promote business in selected areas sometimes provide free Wi-Fi access.
Routers that incorporate a digital subscriber line modem or a cable modem and a Wi-Fi access point, often set up in homes and other premises, can provide Internet-access and internetworking to all devices connected (wirelessly or by cable) to them. One can also connect Wi-Fi devices in ad-hoc mode for client-to-client connections without a router. Wi-Fi also enables places that would traditionally not have network access to connect, for example bathrooms, kitchens and garden sheds.

Good luck and have a nice day.
rating the solution is highly appreciated.

Jul 29, 2010 | RIM BlackBerry Curve 8520 Smartphone

1 Answer

WLAN orange light blinking


Wi-Fi base station: Understanding and resolving a blinking amber status light Your Wi-Fi base station status light blinks amber.
Here are some of the more common reasons that the status light may blink amber:
  • The Wi-Fi base station has not yet been configured because it is new.
  • The Wi-Fi base station has been reset.
  • A new firmware update is available for the Wi-Fi base station.
  • No IP address is available for the Wi-Fi base station.
  • A Wi-Fi base station in Extended Mode is out-of-network Wi-Fi range of a primary Wi-Fi base station.
  • The WAN Ethernet cable is unplugged from the Wi-Fi base station.
  • The Wi-Fi base station lacks a path to the Internet (or local router).
  • Internet access may be temporarily unavailable from your Internet Service Provider (ISP).
  • Your AirPort Time Capsule has detected that the internal hard drive has reported a SMART error, and is failing (This requires firmware 7.5.2, and AirPort Utility 5.5.2).
A persistent, blinking, amber status light indicates that your Wi-Fi base station may require your attention.
How to resolve a blinking amber status light alert
Launch AirPort Utility to determine why your Wi-Fi base station status light is blinking amber.
Apple recommends that you use AirPort Utility 5.5.2 for Mac, AirPort Utility 5.5.2 for Windows, or a newer version of AirPort Utility if one is available.
  1. AirPort Utility 5.2 or later opens automatically if your Wi-Fi base station requires your attention. You may also choose to launch AirPort Utility at any time.
    Do not use any version of AirPort Utility earlier than 5.0.
    In Mac OS X, AirPort Utility is located in the Applications > Utilities folder.
    In Microsoft Windows, AirPort Utility can be located by clicking Start > All Programs > AirPort.
    Note: You may also locate and download the latest Wi-Fi base station firmware and software by clicking here.
  2. In the AirPort Utility window, locate your Wi-Fi base station and double-click on it to open the Summary window. Note: If you have more than one Wi-Fi base station, double-click on the icon for the Wi-Fi base station that has the amber circle next to it.
  3. When the Summary window appears, double-click the amber circle to the right of Wi-Fi base station Status to open the Status window.
  4. The Status window lists any conditions that require your attention. Respond to each item until there are no more items listed.
    Important
    : You must reset the Wi-Fi base station using the reset switch to re-enable checking for the conditions you ignored.


  5. Eliminating the blinking, amber status light may require making changes to a specific setting, or putting a checkmark in the "Ignore" checkbox beside any option you don't wish to change. A checkmark simply tells the AirPort that you are aware of the issue and you have chosen to ignore it. For example, you may wish to leave your AirPort open without a password so that anyone can join your wireless network.
  6. Click Update to apply your changes (the Wi-Fi base station will restart).
  7. After the Wi-Fi base station has restarted, the status light should be green and not blinking. If the status light stays amber in color and blinks after the Wi-Fi base station restarts, you may repeat the steps above.

Oct 03, 2017 | D-Link (DI-784) Wireless Router

1 Answer

E740 BT can be upgrade to Pocket PC 2003 ?


Sorry but I think that you must choose worst scenario. You should buy “SD Wi-Fi Card”.

Sep 08, 2005 | Toshiba e740 Pocket PC

Not finding what you are looking for?
Toshiba e740 Pocket PC Logo

Related Topics:

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

pankaj rautela
pankaj rautela

Level 3 Expert

1252 Answers

Are you a Toshiba Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...