Question about Philips Magnavox Learning Universal Remote

1 Answer

Lost codes i need the code for a philips universal remote control to just control the dvd player that is a goldstar vcr dvd player please help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,071 Answers

Http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or yourbrand is not listed, and you are still not able to get the unit to respond, trythe following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when youreach the end of all the codes for this device type.

  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

2. Learn the buttons from the original

Line up your original remote and the head-to-head before completing thefollowing steps.
  1. PRESS and HOLD the SETUP button until the red LED flashes twice.
  2. PRESS 9 - 7 - 5, the red LED will flash twice.
  3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
  4. PRESS the button that will receive the learned function, the LED will flash rapidly.
  5. PRESS the button on the original remote to be learned.

Now you can repeat steps 3 through 5 to learn other functions onto other keysor press and hold SETUP until the Cinema's red light flashes twice to lock inyour new feature. (If the red light does not blink twice, stop and repeat stepsthrough 6).
To test the new feature, press and release the device key in which the newfeature was learned followed by the key on which the feature was learned

More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

Hope that helps! Should you have any further questions,please feel free to post them here.
Television Video - DVD Audio Satellite Set Top Box Video - VCR Brand: Model (optional): lost codes - clip_image001.gifWe could not find an exact match, we think this code will work. 10054 clip_image001.gifclip_image001.gifSetup Instructions
· Set the "Mode Switch" to TV.
· Press and hold the "Mute" button and the "Select" button until the visible LED blinks twice.
· Enter the 5 digit Code above.
· Try your new code and tell us how it worked!
You'll have to settle for that, use the middle power key in the tv device to power on & off the tv.


hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE;

Posted on Sep 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need code for philip s remote for a sayno ty


Philips rca universal remote codes sayno vcr dvd combo ...

www.fixya.com > ... > Remote Controls
Universal Philips Magnavox remote for a Sanyodvd vcr combo ? I have a cableremote and need to program my Magnavox vcr/dvd combo into it i have 2 dvds ...

How to Reprogram a Philips Universal Remote Controller ...

science.opposingviews.com > Computers

Dec 21, 2015 | Philips Remote Controls

1 Answer

Need code to connect ot a toshiba vcr / dvd player


I found that this website should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/
if this helps please give a fixya rating as thats how we get paid.

Jun 12, 2009 | Philips Universal PH301S Remote Control

2 Answers

Need codes for a philips universal 0713 remote control


i lost my mannual to my philips universal remote and i need to program it to my hitachy vcr,sharp tv. and my dvd

Apr 11, 2009 | Philips Magnavox Learning Universal Remote

2 Answers

Magnavox dvd player and universal remote need code please


have rca universal emote need codes to progam magnavox dvd player please help thanks

Mar 17, 2009 | Philips Remote Controls

1 Answer

Ph601s universal philips remote it controls 6 devices tv vcr dvd cbl sat cd


I have a sharp a philips dvd a hitachi vcr apinoneer sound system

Feb 09, 2008 | Remote Controls

2 Answers

Remote control codes


i lost my code list how can i get new list

Jan 25, 2008 | Philips Magnavox Learning Universal Remote

3 Answers

Lost remote codes


i need a code for a philips universal for my dvd player it is a daenyx

dv-5002 cant seem to get it too work i might have wrong code thanx


Dec 03, 2007 | Philips Magnavox Learning Universal Remote

1 Answer

Need dvd code


Do you happen to know the model# of your Sylvania DVD/VCR player? That will help me access the correct codes for your set. Let me know, thanks!

Sep 24, 2007 | Philips PM3S Remote Control

Not finding what you are looking for?
Philips Magnavox Learning Universal Remote Logo

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Remote Controls Experts

Ross Keen

Level 3 Expert

1130 Answers

gbob59

Level 3 Expert

2963 Answers

Tech Leprechaun
Tech Leprechaun

Level 2 Expert

61 Answers

Are you a Philips Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...