Conversion of usc to metric and vise versa - Computers & Internet

Hello, Nancy -

If you think you will ever need to convert metric measurement to
"English" measurement (used in the USA), this is a great web site (for all kinds of conversions):
http://www.metric-conversions.org/volume-conversion.htm

This is the link to the home page for conversions:
http://www.metric-conversions.org/

I suggest you save that web page address to your Favorites / Bookmarks.

Using the conversions calculator for milliliters to U.S. fluid ounces, this is the result:
50 ml = 1.690701 U.S. fluid ounces
This is the result for U.K. fluid ounces:
50 ml = 1.759754 U.K. fluid ounces

I assume your question has to do with liquid perfume.

The conversion is from inch pounds to Newton Meters

The factor: 1 Lb-Ft = 1.35582 Nm.

The direct quote: boltscience.com

Torque is a measure of how much twisting is applied to a fastener. The units used to measure torque are in the form of force times length.
The metric (SI) unit of torque is the newton metre (Nm). In inch units, torque is usually measured as Lb-Ft (pounds feet) or Lb-In (pounds inch). The Torque Converter Calculator will allow you to convert Nm to Lb-Ft or Lb-In or vice-versa. The calculator uses the conversion 1 Lb-Ft = 1.35582 Nm.

HOPE THIS helped

Torque Units Conversion Online Units Converter

Paper jam at the drum area. Are you printing to this machine ensure the print properties equals what is a the machine Landscape paper not portrait vise versa. Ensure machine not set to metric size paper vise Inch in the USA

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

There is a e/m button on the dash by the mode and reset buttons that switches the odometer from english to metric or vise versa.

1 Kilogram (Kg) = 2.20462 Pounds (Lbs)

1 Pound = 0.453592 Kilograms


See the following links for Online Conversion Calculators:

http://www.metric-conversions.org/weight/kilograms-to-pounds.htm

http://www.metric-conversions.org/weight/pounds-to-kilograms.htm


Just use your mouse to click on the link, which is the underlined and highlighted text just above. This will open a new web browser page automatically for you and allow you to view the information at the website indicated.

Good luck.

Sorry, the TI-30XA does not offer unit conversion functions other than angle units. The best thing you can do is to get the conversion factor from a table in a book, or look it up in the internet, and store it into one of the three M memory places of the calculator.
Use the memory recall and divide or multiply to convert.

Example: Convert metric tons (Mg) to international avoirdupois pound (lb), and vice versa. Conversion factor is:
1 lb = 453.5937 Mg.

• Key in 453.5937 [STO] [0] to put the conversion factor in memory 0.
• To convert 17 Mg to lb, key in: 17 [÷] [RCL] [0] [=].
• To convert 5 lb to Mg, key in: 5 [×] [RCL] [0] [=].
  

you ca either take a hammer and pound a bigger one into it if its metric pound a standars one into it vise versa if all else fails use a vise grips or you can drill the head off it

Heres one called science tools and it has sig figs, vectors and unit conversions and one other. http://education.ti.com/educationportal/downloadcenter/SoftwareDetail.do?website=US&tabId=1&appId=205