Question about Lakewood Heaters

1 Answer

ROCKER SWITCH DIAGRAM

I NEED TO SEE A WIRING DIAGRAM FOR THE ROCKER SWITCH ON

A MODEL 7000 LAKEWOOD OIL FILLED HEATER

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

ROCKER SWITCH DIAGRAM - 89106a6.jpg
On the top of the switch (inside the heater) there is a common connection.....even though it looks as if it is connected (electrically), it isn't electrically affected by the switch; it's just used as a post. It's just the place where the striped wire connects to the "common" point for the heater coils (they are in a parallel). Also, while you're in there you might want to put some electrical grease on the exposed conductors.....mine had quite a bit of corrosion (which was the reason for the failure). I had to replace 3 of the female connectors.

Posted on Jan 01, 2010

  • Michael Perrin
    Michael Perrin Nov 22, 2014

    Thank you. I bought a heater without a switch, and this made the new plug-in easy!

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No lights on switch on--no heat--on LAKEWOOD mODEL 7000/A


Look for a thing called a Thermal Fuse, small, pencil sized cylindrical, silver, (usually) with stiff lead at each end. It should be in the Phase/Active line. Try replacing that.

Feb 12, 2010 | Lakewood Oil-Filled Electric Radiator...

2 Answers

Lakewood space heater thermostat source


No I never had any luck and the parts likely 1/2 the cost or more of a new one at wal mart and the heat element would still be old too

Dec 31, 2009 | Lakewood 5101 Oil Filled Radiator Heater

1 Answer

Need new electric cord for model 7000/a lakewood heater oil filled


Depending on handy you are, the power cords for heaters can be replaced, but may require soldering or other electrical and mechanical skills. You MUST replace the cord with one that has the same amperage and heat ratings.....that goes for the plug too.

Feb 20, 2009 | Lakewood 7101 Oil Filled Radiator Heater

1 Answer

I need a wiring diagram for a lakewood 5500


Visit this page for service center info and or parts: they should be able to help you http://www.lakewoodeng.com/html/parts.html

Feb 13, 2009 | Lakewood Oil-Filled Electric Radiator...

1 Answer

Switch


Try this link   http://www.nelsonappliance.com/Space+Heater+Parts.html

Mar 24, 2008 | Lakewood Oil-Filled Electric Radiator...

1 Answer

Rocker switch for 600 watts broken----


First of all complaining to FixYa isn't going to accomplish anything. I doubt that the supplier of your device even knows about FixYa. Now on to your problem --- can you get me any numbers off the rocker switch? I'll do the research and get back to you. Use my original email address which can be found in my profile.

Dec 01, 2007 | Lakewood Oil-Filled Electric Radiator...

Not finding what you are looking for?
Heaters Logo

Related Topics:

2,061 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lakewood Heaters Experts

Mack Baxter

Level 3 Expert

379 Answers

paulcarew

Level 3 Expert

1914 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Lakewood Heater Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...