Question about Hoover Floormate H3000 Upright Wet/Dry Vacuum

1 Answer

Hoover floor mate 500

The knob that you turn to change from wet pick up/ dry pick up and wash and wet pick up dose not seem to go to the wet pick up or the dry pick up what can I do to fix the problem.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

If you mean the footswitch that shifts from wet to dry, trun the machine over with the brush assembly removed. There is a black rectangular oush button on the left side. This is the wet/dry switch. Make sure it is in contact with the white post to the left of it . It is the indicator that moves when you step on it. Push the button all the way in and out until it latches. After that it should work OK. Hope yhis helps.
Kirk Thompson
San Juan, PR

Posted on Oct 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hoover floor mate sucks up water while in the wash position


They do that. They pickup the water in all stages but lower the squeegee to different heights. At no point does the suction turn off.

Jan 20, 2013 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

My floor mate won't dispense liquid onto the floor


make sure the solution tank is on properly this link is for the manual
http://hoover.com/file/683/

Aug 04, 2012 | Hoover H3010 Upright Wet/Dry Vacuum

1 Answer

Can I use the Vacum cleaner for floors only without using the liquid. I do not want to wet the floors just sweep the dust away. I cannot find my manual.


first off your manual is right here....

http://www.hoover.com/pdfs/manuals/H3000.pdf

But more to answer your question, yes you can use it on the floor without the wet. You will want to turn your brush switch to the off position. Also, do not fill the water tank or press the spray lever for dry pick up only.
Hope this helps.

Nov 05, 2010 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

I have a hoover spinscrub 800. It washes great


in some cases when this happenes it's usually from a really bad filter or the squeege at the bottom of the nozzle. the squeege is what makes contact with the floor and suctions all of the water up. to take off. take off the nozzle and there will be (3) screws inside of the nozzle. once these screw are removed, the squeege can be removed. at hoover.com the replacement part # is 93001094. ( according to model # H3060 )

Jul 31, 2009 | Hoover H3060 FloorMate SpinScrub 800...

1 Answer

Our Hoover floor mate won't **** up the water. Motor runs but pick up is limited.


you will need to replace the squeege that is located on the nozzle. 3 screws will take it off. you can get this at a vac shop or order it from the company, filter may also need to be changed

Jul 18, 2009 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

Loud noise, smell smoke, brushes turn slower than before, stoped using


yes there are replacement parts for your hoover call any athourized hoover dealer and give them your model # usualy the motors are more expensive than the hole machine

May 22, 2009 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

Cleaning Solution


The solution is called "floor to floor" sold in a white 48oz bottle

Jan 18, 2009 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

Hoover knob won't turn to all postion's


What Knob do you mean?

Kirk Thompson
San Juan, PR

Aug 27, 2008 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

Hoover floormate 3060


You should first check to make sure that the machine is set on wet pick up and not dry. When in dry mode ( the front foot pedal on the left side) the machine is held slightly above the floor. When is wet mode, the squeegees drop down to the floor. The other problem may be the wheel assy is broken. Turn the machine over and check the black plastic wheel carrier at the back of the assy to see if the pivots are broken.

Jul 02, 2007 | Hoover Floormate H3000 Upright Wet/Dry...

Not finding what you are looking for?
Hoover Floormate H3000 Upright Wet/Dry Vacuum Logo

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Roger Potts

Level 3 Expert

694 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...