Question about Whirlpool Dryers

1 Answer

Dryer modle #LER8858EQZ quit working eveything works but the blower

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 639 Answers

DEAR FRIEND,
ngfam1 here for you!
I am happy to be of assistance!

This is a situation that you will need service!
Probably a short or a blower motor needs to be replaced!
If this dryer is 10 years old or more do not spend any money on it!
The new ones are much more efficient! If you have to replace it buy a Speed Queen , it will do 8 loads a week for 25 years!
It's the last washer and dryer I will ever buy!!!! And less expensive than a top of the line unit!

Here is the service company I refer my appliance customers too!
A&E Factory Service
A Nation Wide Company. / Available 24 / 7 for arranging appointments! In the USA.
1(800) 905-9505

Good luck!
You will be fine now!

Thank You
Bless you,ngfam1
PS. PLEASE GIVE ME A GOOD RATING HERE ON FIXYA.COM BEFORE YOU SIGN OFF!

Posted on Aug 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heating element on a maytag


The most common problems with a gas dryer can be Blown fuse on blower housing clog lint causing excessive heat, open flame sensor, open ignitor, faulty solenoids that sometimes work once then quit then work again after a long cool down. The blower wheel is plastic. They wobble out over time and cause a drop in airflow resulting in very poor performance. That is about all the smart pills I know. Here is how it works and how to replace them pesky coils a home movie from me.

Nov 20, 2013 | Maytag MDG7758AW Gas Dryer

1 Answer

Neptune dryer 5500 no power


This dryer has 2 thermal fuses. One next to the control stat on the blower housing and another on the heater element. You could quite possibly have a bad blower wheel or simply a lint build up cauing over heating. To get inside this dryer you remove the door first. The you can remove the front. Once that is removed you can pop the top and get the front shroud off. You cannot work from behind.

Sep 17, 2012 | Maytag Neptune MDE5500AY Electric Dryer

1 Answer

Dryer model mde6657byw will not turn on . after I pull on the start knob and hold, it should turn but will not


How old is this modle? Lots of times even after a few years the timer will quit working,Those are timers in that knob and once they quit,,they need replaced and they are never a cheap date.

Mar 07, 2011 | Maytag Dryers

1 Answer

Dryer quit spinning.


If the blower is working, then it's most likely the belt, a belt pulley or a tensioner spring.
Open the dryer, it will power off, and then spin the drum by hand. If it moves with little resistance, it's your belt.

Dec 11, 2009 | Maytag Dryers

1 Answer

Blower motor quit working,replaced eveything


check for power at the blower connections,check all grounds

Oct 02, 2009 | Ford Ranger Cars & Trucks

1 Answer

Roper dryer model REX 3514RQ1. dryer works for/then quits. help!!


I have seen this before. You have got to remove the housing for the filter. Blow out the area around the blower and get the junk out of there. Wash out the filter housing.

Jul 06, 2009 | Dryers

1 Answer

My Whirlpool LGN2000PGO not getting HOT


It may be the element has gone bad. You can visibly check it to see if it is bad. Quite simply the wire will be burned in two. I assume your drum is turning o.k.

Jan 14, 2009 | Whirlpool LER4634J Electric Dryer

1 Answer

Kemore dryer modle 11072622101


There is a white thermal fuse on the blower assy. It has 2 wires going into it. You can , off course unplug the dryer first, take the 2 wires and attatch them together. Your just bypassing the fuse. Bypass it and try running it. If it works replace the fuse. If not, let me know. Hope that helps , dave www.washermd.com

Dec 16, 2008 | Dryers

1 Answer

Ge harmony dryer not heating up dpgt750ec1pl


If you hear the blower ramp up when you start the dryer and if slowly ramps down or quits all together then you need to replace the blower. If the dryer heats at all then look at the blower.

Jun 20, 2008 | GE Profile Harmony DPGT750EC Electric...

Not finding what you are looking for?
Dryers Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Tim Whalen

Level 3 Expert

3072 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...