- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi this is tech crazy the solution to the problem is
You should be able to replace this part yourself. Follow these steps to replace the water actuator:
Unplug the refrigerator to completely disconnect electrical power. Turn off the water supply to the refrigerator.
Remove the drip tray (Key 23 in the image below) from the bottom of the dispenser.
the screws (Key 43) from the bottom of the dispenser module cover (Key
4). NOTE: You model may not have screws at the bottom of the dispenser
cover. If not, push down on the top of the dispenser cover and pry out
on the bottom of the cover with a flat tip screw driver to remove it.
Pull to dispenser module cover up to release the top clips and remove this cover and set it aside.
Remove the screws (Key 17) that are on each side of the dispenser module (Key 8).
pull the dispenser module out slightly from the door. It will have
wires attached. Pay attention to how the water tube and the ice door
assembly are positioned. Pull this module out far enough to remove and
replace your water actuator (Key 24).
trying to bring temp down on the fridge side.first i tryed to just turn the temp up. Waited over night no change. Went back to factory setting,still no change. Fridge still under waranty all ready has a new copressor and invaporator installed by fridgaire. The fridge is only a 03 alittle young to have these problems.
Maybe this will help .. should be diagram of dispenser
the water tray probably just pulls out and there's screws near the base that comes out. up underneath there should be some screws to take out. thhen the unit comes down and out the front. wires and a hose will be coming out with it.