Question about Air Conditioners

1 Answer

George forman grill model GRB72P stopped heating hot enoughto grill. tried all good plugs no improvement.

Posted by on

1 Answer

Check out the G.F grill website, but sounds like a heating element going bad! Thank-you-very-much!

Posted on Aug 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The heat and ac work, but not all the time. When I first turn the heat on it blows hot, but over a two or more hour period is stops blowing hot and is cold air coming out only.


Ice buildup on the coils is not normal. Once iced over, the coils can no longer extract heat out of the air which is how a heat-pump like this works.

Dec 09, 2014 | Air Conditioners

2 Answers

My Eternal Hybrid natural-gas hot water heater, Model Number GU195 stopped working, and gives a E02 error code. When the heater automatically attempts to burn, the natural gas doesn't, until the...


I'm having a similar problem. My water heater is Eternal GU195S. It will heat up the water it's in the tank so I will get hot water for a few minutes. Then whenever the system tried to heat up on-demand, it will not heat up and gave E02 error. If I stopped drawing water, the E02 error will go away and the temp setting I had will come back on. What could be the problem? I currently took it out of service and set it up outside my work shop for testing. Thanks.

Sep 08, 2011 | Air Conditioners

3 Answers

The electric cord on our Duracraft heater model CZ-600 was very hot to the touch (closest to the plug) -- it burned so hot we could not touch it for more than a second. The heat was at maximum and we...


Look carefully at the plug's connectors to see if thewre is any scorching or otherwise burnt metal...electrical connectors tend to get hot due to the plug being loose(this causes more resistance and thus more heating). As a safe bet...the parts aren't expensive...I would replace both the power cord on the heater AND the outlet recepticle

Jan 17, 2011 | Air Conditioners

1 Answer

Heating ok hot water gets only aired


Not sure what your problem is from the description... you have a heat pump that heating but not cooling? A water heater?


In general try these things:

Power off for five minutes (at least) and then power back on...

Make sure the grill and any filters are clean. No air flow means no heat/cool exchange.

Make sure the water line valve isn't partially closed.

If you have access to a voltage meter and are comfortable using one, check the voltage to the unit. There should be a label on it that tells you what it should be getting (there can be some variance, but not much).. i.e. 115v or 115vac.. virtually the same as 120v.. or the next stage is 208/230v...

if it's not getting enough voltage then you have a problem that an electrician or someone knowledgeable would need to look at, or the element inside is going out.

If it's gas and not electric it could be dirty gas valve, low gas volume, dirty burner...

Good luck!

8^)

Jan 02, 2011 | Air Conditioners

1 Answer

My window a/c compressor won't turn off, thus making the room extremely cold.... Kenmore 17,5/18000 btu model 580.73189300. Earlier, the front grill was iced over and i have since thawed it out (the 1st...


the unit running all the times sounds like a faulty thermostat which is saying its still hot when its not.try finding thermostat make sure all plugs are in all the way on the circuit board. does it run all the time on heating? the iceing up would just because its running all the time. i

Nov 10, 2010 | Kenmore 75180 Wall/Window Air Conditioner

1 Answer

Coleman airhandler installation


Hello,George TIPS?I assume you are looking at the elements as they run.A 4 ton drive can keep active heat strips from glowing.What is your heat rise split.Meaning in/supply out/return temps?W1&W2 sequencer time delays can be up to 3 minutes.Take a AMP reading on 1 heat element supply wire with a volt meter.You can jump W1&W2 at the board for testing.

Apr 23, 2010 | Coleman Air Conditioners

1 Answer

I have a Fedders Model AEJ 12 E 7AB REV N installed in Nov 2000. When running the heat Monday night, we had sparks and smoke come out of the unit. A terrible smell took over the house for a few hours. We...


I am a heating and cooling extrodinaire and it sounds like the blower motor has failed, but it could also be electrical burnout.(ciruit board, coil on a relay etc..) I would call a service tech. Most motors that are mounted in the air stream are called air over motors so if the filter was plugged and not letting enough air over the motor, its a good chance that the motor over heated.

Jan 28, 2009 | Fedders A6X05F2D Air Conditioner

1 Answer

High Pressure cutoff


YOUR OUTDOOR FAN MOTOR SHOULD NEVER SHUT OFF IN THE AC MODE. IT IS SUPPOSED TO SHUT OFF IN THE HEAT MODE WHEN ITS IN DEFROST. IF THE UNIT IS RUNNING IN COOL AND THE OUTSIDE MOTOR QUITS ,THE COMPRESSOR WILL QUIT SOON AFTER. EITHER THE RUN CAPACITOR FOR THE FAN IS BAD OR THE FAN MOTOR ITSELF IS BAD, IF CAP IS GOOD THEN THE MOTOR IS At FAULT. THE OUTDOOR PRESSURE SWITCH CAN ALSO OPEN IF THE INDOOR FAN MOTOR FAILS IN HEAT OR THE FILTER IS PLUM NASTY in heat OR THE INDOOR COIL IS PLUGGED UP in heat.. THE PRESSURE SWITCH USUALLY TRIPS AT 400 TO 425 SO ITS WORKING CORRECTLY. YOU MAY BE CONFUSING THE ISSUE SAYING THAT THE AIR IS HOT AND COLD INSIDE. IT IS COLD WHEN AC IS RUNNING HOT WHEN HEAT PUMP IS RUNNING IN HEAT BUT ESSENTIALLY not cold or hot if compressor isn't running, but a lot of folks describe the lack of cold air as hot when the compressor isnt running. but it basically is warm or house air temp.you test the capacitor with a capacitor tester or take it to motor shop and let them test it. odds are its a 5 , 7.5 or a 10. it should test within 10 % of rated value . ask for a RESCUE brand replacement motor. they are great ,reversable etc.carefully oil and sand the motor shaft and note exactly where the blade was located in relation to the grill so you get it back just the same. usually they wire up black to a leg of 220 power. white to the other leg of 220 power. brown and brown with white stripe to the capacitor.you can also pull whole fan shroud assembly on some units and take whole thing to motor shop and let them test motor cap, replace and all you do is return to unit and connect two power leads,

Oct 26, 2008 | Air Conditioners

3 Answers

Water is filling up in drain pain


My suggestion is to NOT pull the plug on the drain that should be covered with a sign that says...do not remove plug. Water is supposed to be kept in the pan. The interior wheel then helps the water keep the condenser cool....Ron

Sep 22, 2007 | Amana PTH123B25AJ Heat Pump Air...

Not finding what you are looking for?
Air Conditioners Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Air Conditioners Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Bill Long

Level 3 Expert

577 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Are you an Air Conditioner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...