Question about Panasonic CR2016 Lithium Coin Battery

1 Answer

What is the wright technique in Charging NiMH AAA and AA Cells?

I have a Triple A and Double A Fast Battery charger from radio shack. It chargers

Ni-Cd and Ni-MH batteries.

It runs on 12 v @ 700 mA input. I have a 12 volt 1000 mA connector that fits.

Will this adapter work? Would anything other than a 700 mA charger work? Say a 600 or 800 possibly?

Posted by on

  • michael334 Aug 27, 2008

    The 1000mA should work fine, as it will only deliver what is needed by the charger

    (much like a PC PSU).

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Should work. As long as the voltage is correct the components of the charger should work. Depending on the type of "end of charge", i.e., time, voltage drop, temperature, it may take longer to charge with lower power ratings.

Posted on Jun 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a wii system and use the energizer nimh battery pack with the wii charger. When I put them in the charger it flashes red. Reminds me of my camera battery charger, but I have learned how to reset...


I have this issue with one of the batteries in my set. (Purchased last summer). It is a PL-7522

It seams to be the battery, as I have tried combination of charging ports and controllers. The other battery seams fine.

Dec 24, 2010 | Energizer NiMH Compact AA/AAA Battery...

1 Answer

Fuji battery charger BC-45 - red light blinks when I put in battery and battery does not charge


Ok all mine had the same problem however problem has been solved! The power cord that plugs into the charger is a common cord you may have laying around the house. I switched the power cord to my charger and the dreaded blinking stopped! Its just a bad power cord to the charging unit! Hope this helps!

Aug 03, 2010 | Duracell AA/AAA NiMH Battery Charger with...

1 Answer

What should I do if my Duracell charger does not seem to be charging. I had added non NiMH batteries within 1 minute it gave a noise and when i saw non-lithium batteries, it burst with some little...


You broke it. there is no fix.
The batteries you put in it that blew were resisting the charge and fighting with the unit and most likely burnt up some electronics inside the charger.
I would not use it at all or even try to use it. You may cause a fire or get zapped.

Aug 03, 2010 | Duracell AAA NiMH Battery Charger with 4...

1 Answer

Why the battery charger blinks during charging


If these are old batteries, one or more may be dead.

Jul 18, 2010 | Duracell AA/AAA NiMH Battery Charger with...

1 Answer

Red light is flashing off and on


Please refer to your charger user manual: but in general, this indicates that the charger has determined that one or more of your rechargeable is faulty (despite the fact that it may still hold a partial charge).
Smart charger can measure the expected voltage and current flow and will prevent any 'faulty' cells to be charged (those 'faulty' rechargeable batteries may actually still be useful and charged on other less intelligent charger). Try charging them individually (if your charger can handle individual battery) or in different pair combination to locate flaw cell.
Hope it helps.

Jan 28, 2010 | Duracell AA/AAA NiMH Battery Charger with...

1 Answer

When I insert some batteries the red light begins blinking. I also have some Duracells that appear to be charging but when I place them in the appliance they are dead.


All chargers cannot charge all types of batteries. Are your Duracell batteries NiMH or Alkaline? These indications generally happen when you insert a battery type that is not rechargeable.

Dec 13, 2009 | Duracell AA/AAA NiMH Battery Charger with...

1 Answer

I have an Energizer E2 Slider battery charger, Is the green light supposed to stay on when charging. Does it shut off when charge complete.


all chargers show a light of some colour when charging , green or red , depending on make of charger , when the battery is fully charged the unit monitor this and automatically switch of to stop from over charging , a safety feature that has to built in for safety reasons ,

Jul 19, 2009 | Energizer NiMH Compact AA/AAA Battery...

1 Answer

LED Light on or off indicator


on my charger the red lights are only to tell there is power connecting especially when you have two battery's behind each other on the bottom of my charger there is a guide as to how long you should charge each battery as to size which are aaa 7hours max
aa 24hours
c 24hours
d 24hours
9v 24hours
hope this helps glenn............

Nov 20, 2008 | Duracell AAA NiMH Battery Charger with 4...

Not finding what you are looking for?
Panasonic CR2016 Lithium Coin Battery Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Batteries & Accessories Experts

Carl Glas
Carl Glas

Level 2 Expert

283 Answers

kakima

Level 3 Expert

96415 Answers

Jay Finke
Jay Finke

Level 3 Expert

1222 Answers

Are you a Panasonic Battery and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...