Question about Kenmore 46462 Front Load Washer

2 Answers

Error message f 09 and f 02

Okay so i have had my kenmore elite et3 for about 5yrs now and im really not sure what model number it is. i looked at all the pics listed on this website and could not find it but anyway, i really have enjoyed this washing machine up until two days ago. i put a load of clothes on and about 30 mins into washing an error code f 02 along with a beeping noise comes up. i know that f 02 means SUDS but i normally just press the rinse/drain button and everything is fine. this time NOTHING happened. it would rinse but not drain and now f 09 is flashing along with that beeping noise again. i cant cancel anything and open the door b/c its full of water. its like its not spinning or draining. PLEASE HELP!!

Posted by on

  • tres7777 Nov 06, 2008

    F and beepeing during wash cycle

×

2 Answers

I dont know where to add bleach

Posted on Sep 04, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,028 Answers

Remove bottom panel..reach up from bottom to door lock area pull down on small tab hanging there door will release ..dip all the water out you can ..shop vac will help..remove the knob on front of pump have towels handy clean pump trap ck pump impeller for obstructions reassemble and ck if problem persists may be loose impeller on pump

Posted on Aug 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have frensh door kenmore elite fridge model number 795.72053.110 display error code if someone cane please help me ? ER F5 WHATS THE MEAN .... THANK YOU SO MUCH


faulty cercit board is what you have there sorry to say but it dose happen every so often get in touch with the poeple who you got it off and have the engineer look at it

Jan 22, 2015 | Kenmore Refrigerators

1 Answer

I have a sears kenmore elite slide in range model number 790.46613500 that has a f13 err can anyone help with this


Unfortunately, the F13 error indicates that the oven control has failed. First unplug your range and wait 30 seconds or more to reset the code.

If the error recurs, this part will need to be replaced. See http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-elite-Parts/Range-Parts/Model-79046613500/0583/0124160/R0507023/00001?blt=06&prst=0&shdMod=79046613500 for the parts list.

I'm not exactly sure if your unit needs part 97 or 97A.

I hope this helps.

Cindy Wells

Dec 08, 2012 | Kenmore Elite Sears & Other Brands...

1 Answer

Have kenmore elite oasis electric dryer model 11068062701 gives us code f, have misplaced manual


Hi and welcome to FixYa, I am Kelly
Your model number appears to be in error: 110.68062701 is what you posted but the manuals are 110.68062800 and 110.68062801.

Parts list:
http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-elite-Parts/Dryer-Parts/Model-11068062801/0583/0151200?searchedModel=110.68062&blt=15

The onwers manual is linked off of this page:
http://www.managemylife.com/mmh/owner_manuals/6396/KENMORE-ELITE-Residential-Dryer-

and uses this link:
http://www.managemylife.com/mmh/lis_pdf/OWNM/L0801316.pdf (6.44 mb)

The F code is usually followed by another number F1, F2, F20 etc. I can help you but really need to know what the other number is. When the dryer shows an F code it is telling you that there is a failure. Without the number following the "F" there is no way of knowing what that failure is.

If there are any other symptoms can you please post them here?

Thanks for choosing FixYa,
Kelly

May 30, 2011 | Dryers

1 Answer

Locked with "suds" as error message- need clothes quick! please! - too much detergent in.


Dump some vinegar in the soap dispenser this will kill the suds and your clothes will be okay, really

Aug 11, 2010 | Kenmore Elite 45986 Front Load Washer

2 Answers

Kenmore elite he14. What is the f14 error?


EEPROM Error

The Central Condrol Unit (CCU) receives it's data from an EEPROMonboard the CCU.
If there is an error reading this data, it will cuse this error.

A power glitch may cause this error. Try unplugging the Unit for two minutes to see if that fixes the error.
Check CCU

So its likely you'll need a new CCU board. Check your owners manual, some models have up to a 5 yr. parts warranty on that CCU.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Feb 18, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

We have the kenmore elite trio bottom freezer refrigerator model 795.7756 - we have error message ER IF, we know the ice maker will not come on and have tried resetting it. How can we get the icemaker to...


This is an error code for the icemaker fan motor.
If the control does not see a signal coming back from the fan motor you will get this error code.
Please see the image below from the service manual that explains the ER IF error code.

http://media.fotki.com/1_p,wkbwtkdqbqkgrkkxgtqsskgwtqkq,vi/ktfgsrbbdxktrrwffdr/1/1303472/5961857/image18067img-or.jpg

The ER IF code indicates a failure of the icing fan.

You may notice slower ice production but the other fans should be okay.

You can select the ultra ice option and see if the fan toggles on.

The fan or the control is bad.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Sep 01, 2009 | Kenmore Elite 22.4 cu. ft. Bottom Freezer...

1 Answer

Kenmore Elite Oasis HE/ Error Code F1


Ok these are not the series 70, getting a model number off the door will reallllllly help. Some of these sound like the oasis. F1 is motor control or primary control failure and F 41 is a rps thermistor failure.
For the guest with the 11027086601 kenmore elite oasis here is a link for supplying me with a partial model number, much thank yous!! paste in a browser:)

http://www.searspartsdirect.com/partsdirect/retrieveSubComponentPartsAction.action?modelNumber=11027086601&productCategoryId=0153200&brandId=0583&modelName=RESIDENTIAL WASHER&diagramPageId=00002&componentDescription=CONTROL PANEL PARTS&documentId=K0601003&backToLink=Return to Sub Components list

Aug 02, 2008 | Kenmore 22422 Top Load Washer

1 Answer

Kenmore Elite


could be spash over be sure washer is as level as possible

Jun 01, 2008 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Kenmore 46462 Front Load Washer Logo

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Ron Lankford

Level 3 Expert

5386 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

2mikecurtis

Level 2 Expert

65 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...