Question about Toshiba TP43H95 43" Rear Projection Television

2 Answers

Toshiba TP43H95 Will not turn on. Power indicator light blinks constantly.

Posted by on

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

I also was able to repair this problem by replacing the 2 convergence ICs and the 2.2 Ohm 2watt resistors (qty:6) and the tv fired up just fine. I do convergence repairs all the time so if anyone else has this issue I will be happy to repair it for them if they do not feel comfortable doing it yourself. Cost = 375.00 and that includes parts. You can reach me at missionelectronics@sbcglobal.net
Good luck.

Posted on Jun 26, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Needed two convergence circuits., three Hi-Temp. capacitor-filters and one 1.8 OHM-2W Power Resistor. ($550.00 parts and labor)

Posted on Sep 26, 2008

2 Suggested Answers

  • 8 Answers

SOURCE: toshiba TP43H95 projection tv has power but no picture

If it shuts off and then the power light starts blinking red or it never comes on but the power light just blinks red continuously that is usually indicative of the convergence ICs (STK 392-110). You never want to replace the ICs without also replacing the resistors that are associated with them. There are usually 6 resistors, one for each of the colors and there corresponding direction, IE Red horizontal, red vertical, blue horizontal, ect. In the case of this model tv all of the resistors are 2.2 Ohm and 2watts. You will find them right where the STK 392-110 ICs are. Right in front of them. They are blue and have this color code on them. Red, red, gold, gold. These are represented by stripes on the resistors. You can get the parts from www.bdent.com They carry the ICs and the resistors. If you do not feel comfortable completing this repair I could do it for you if you send me the board. My email address is: missionelectronics@sbcglobal.net The cost is 375.00 and that includes parts.
Good Luck.

Posted on Jun 26, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 40" Toshiba LCD TV (model 40RV525U) won't turn on. While plugged in the green power light constantly blinks, but the TV won't power on. Unplugging the TV stops the power light from blinking, but once...


These blinks are fault indications, and are called blinking codes. From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside the TV. If you're sound in electronics, this will make the repair easy. If you wish to get more details about these blinking codes, check this link. Blinking codes to many brand TVs are described in detail. http://electronicshelponline.blogspot.com/
Pull up previous posts by its left sidebar, or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.

Oct 06, 2013 | Toshiba 40RV525U 40 in. LCD TV

1 Answer

Red light blinking on front panel & set wont come on.


The red light is the blink code for your tv. Count the number of blinks and Google your make and model with blink codes added to the end. This will take you to sites that will tell you what the code means.

Aug 20, 2011 | Toshiba TP43H95 43" Rear Projection...

1 Answer

I turn my tv on and the red light next to the power button just blinks. i can fix it just need an idea of whats wrong


most probably a faulty power supply within the tv. Considering the age of the tv this is most likely to be the problem. To prevent this kind of wear and tear in the future use a decent surge protector and it will prolong the life of your components.

Oct 07, 2010 | Toshiba TP43H95 43" Rear Projection...

1 Answer

Unplugged tv for vacation returned and tv does not turn I have a blinking light from power turn on and off bottom


open the back and check the POWER SUPPLY SECTION ,theres a flat white connector that goes from one board to the other , just disconnect and re connect , good luck AJ

Aug 08, 2009 | Toshiba TP43H95 43" Rear Projection...

1 Answer

No picture & the red power light just blinks


If it shuts off and then the power light starts blinking red or never turns on but the power light blinks red continuously that is usually indicative of the convergence ICs (STK 392-110). You never want to replace the ICs without also replacing the resistors that are associated with them. There are usually 6 resistors, one for each of the colors and there corresponding direction, IE Red horizontal, red vertical, blue horizontal, ect. In the case of this model tv all of the resistors are 2.2 Ohm and 2watts. You will find them right where the STK 392-110 ICs are. Right in front of them. They are blue and have this color code on them: Red, red, gold, gold. These are represented by stripes on the resistors. You can get the parts from www.bdent.com They carry the ICs and the resistors. If you do not feel comfortable completing this repair I could do it for you if you send me the board. My email address is: missionelectronics@sbcglobal.net The cost is 375.00 and that includes all parts.
Good Luck.

Mar 08, 2009 | Toshiba TP43H95 43" Rear Projection...

1 Answer

I have a 1998 Toshiba TP43H95 I want to fix myself


If it shuts off and then the power light starts blinking red that is usually indicative of the convergence ICs that you are refering to (STK 392-110). You never want to replace the ICs without also replacing the resistors that are associated with them. There are usually 6 resistors, one for each of the colors and there corresponding direction, IE Red horizontal, red vertical, blue horizontal, ect. In the case of this model tv all of the resistors are 2.2 Ohm and 2watts. You will find them right where the STK 392-110 ICs are. Right in front of them. They are blue and have this color code on them. Red, red, gold, gold. These are represented by stripes on the resistors. You can get the parts from www.bdent.com They carry the ICs and the resistors. If you do not feel comfortable completing this repair I could do it for you if you send me the board. My email address is: missionelectronics@sbcglobal.net
Good Luck.

Mar 03, 2009 | Toshiba TP43H95 43" Rear Projection...

1 Answer

Dont have the remote to aline the colors toshiba tp43h95


You cannot complete the convergence adjustment on most TVs without the remote. You can usually use a good quality universal remote to complete the tast, such as a logitech harmony. If you know someone that has one then its free, but to buy the harmony is more then just to buy a new toshiba remote, which you can get here:
http://www.partstore.com/Part/Toshiba/Toshiba/23306269/New.aspx?ModelMfgName=Toshiba&ModelBrandName=Toshiba&ModelNumber=TP43H95

Its part number is: 23306269 so you can also seach around online for it.

Jan 26, 2009 | Toshiba TP43H95 43" Rear Projection...

1 Answer

Toshiba TP43H95 projection tv has power but no picture


If it shuts off and then the power light starts blinking red or it never comes on but the power light just blinks red continuously that is usually indicative of the convergence ICs (STK 392-110). You never want to replace the ICs without also replacing the resistors that are associated with them. There are usually 6 resistors, one for each of the colors and there corresponding direction, IE Red horizontal, red vertical, blue horizontal, ect. In the case of this model tv all of the resistors are 2.2 Ohm and 2watts. You will find them right where the STK 392-110 ICs are. Right in front of them. They are blue and have this color code on them. Red, red, gold, gold. These are represented by stripes on the resistors. You can get the parts from www.bdent.com They carry the ICs and the resistors. If you do not feel comfortable completing this repair I could do it for you if you send me the board. My email address is: missionelectronics@sbcglobal.net The cost is 375.00 and that includes parts.
Good Luck.

Nov 03, 2008 | Toshiba TP43H95 43" Rear Projection...

1 Answer

Power light blinking


I have a Toshiba 42H81 that has the power indicator light blinking and the TV will not turn on

Oct 14, 2008 | Toshiba 42H81 42" Rear Projection...

1 Answer

Picture and power out


Sorry the garbage man showed up this morning I ask him if he could take it and he helped me load it into his truck.

Feb 20, 2008 | Toshiba TP43H95 43" Rear Projection...

Not finding what you are looking for?
Toshiba TP43H95 43" Rear Projection Television Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69736 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...