Question about Miller SYNCROWAVE 250 DX TIG RUNNER WELDER 951117

1 Answer

TIG welder help

How Should I Use a TIG Welder?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Choose the electrode to use for the project you are starting as well as the variety of alloys you'll use such as the 6061 Aluminum alloy electrode. Grind the electrode to a point. Try to create a tip and sharpen it to help it become more rounded as you weld. Place the electrode into an electrode holder with the tip about 1/4-inch away from the sheath. Choose the settings on your tig welder. The three main ones are AC, DCEP and DCEN. Choose AC for aluminum. Slide the "cleaning/penetrating" slider more to the penetrating side. Set the "air on" to five seconds and the "max amps" to 250. Turn on the gas. For aluminum, use pure argon. For steel, an argon and carbon dioxide mix. Scrub your welding table or flat piece of sheet metal with a wire brush to make it clean and flat. Gear up in full welding safety gear including hood, goggles, apron and gloves. Hold the electrode in your dominant hand and start your welding project. Check your settings every so often to make sure they haven't changed and adjust as needed.

Posted on Aug 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking person who can repair miller tig welder?


Where are you located...we work on them here all the time but I am in the Greater Pittsburgh, PA area

Jan 21, 2010 | Miller SYNCROWAVE 250 DX TIG RUNNER WELDER...

1 Answer

Need wire diagram for Miller Syncrowave 250 DX


diagram is on the inside of cover or go to Millerwelds.com

Jun 21, 2009 | Miller SYNCROWAVE 250 DX TIG RUNNER WELDER...

1 Answer

I NEED TO AIR ARC CAN THIS MACHINE DO THIS AND HOW


hook up to the stick position on the machine - to work + to the stinger hook stinger to the air arc hook up air to the air arc turn welder up to top {350}turn air on at the push button on the air arc & get busy

Apr 09, 2009 | Miller DYNASTY 350 TIG WELDER w/TIG TORCH...

1 Answer

I have a miller dynasty inverter tig welder   It has a help code that comes on when I turn it on the code is p-2


From the user manual for a generic dynasty model welder:
2 Help 2 Display
Indicates an open in the thermal protection
circuitry located on the left side of the unit.
Contact a Factory Authorized Service
Agent if this display is shown.

So you could have anything from a broken or disconnected wire to a bad thermal switch.

You can get user manuals specific to your welder at www.millerwelds.com

Rank this answer please,
Carl

Nov 26, 2008 | Miller DYNASTY 350 TIG WELDER w/TIG TORCH...

2 Answers

Manual for a Cambell Husfeld welder Model WF2000


You can download PDF versions of the manuals for CH welders at the Campbell Hausfeld website.
Look on the left under the Service Center heading for a link to manuals.

Rank this answer if you found it useful,
Carl

Sep 20, 2008 | TIG Welders

2 Answers

TIG welder tips


Go to your local welding supply store. A TIG welder is a specialized welder that cannot be found at a building supply store. Stores like Maine Oxy-Acetylene Supply or Grainger Industrial Supply will carry them. Look in the classifieds of publications like Uncle Henry's. There you might find a TIG welder that someone is selling—and it may be at a good price. Be sure to ask the owner questions and take a look at the TIG welder before buying it. Explore eBay. Yes, even eBay has TIG welders. You'll need to ask the buyer questions about the welder's history and more. Perhaps, if the seller is near enough, you might be able to pick up the TIG welder yourself and save on shipping. Visit online retailers. Retailers like Welders Direct or Welding Mart carry TIG welders and would be able to answer any questions you might have (see Resources below). Consider the manufacturer of the TIG welders themselves. Lincoln, Miller, Hobart and others have their own websites. Call the companies directly and ask a lot of questions. These vendors are the best product source for welders (see Resources below).

Aug 27, 2008 | Miller COOLMATE 3 115V TIG TORCH WATER...

1 Answer

Tig welder suppot


Make sure the area around your welding surface is completely clear. This will prevent fires from starting.

Aug 27, 2008 | Campbell Hausfeld WT610000AV Tig Welder...

Not finding what you are looking for?
Miller SYNCROWAVE 250 DX TIG RUNNER WELDER 951117 Logo

363 people viewed this question

Ask a Question

Usually answered in minutes!

Top Miller TIG Welders Experts

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

1869 Answers

john h

Level 3 Expert

7129 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

10600 Answers

Are you a Miller TIG Welder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...